| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 2 x | Kwik link with arm M3xM2xL24 |
| 1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Metal ball clevis M3 (10 uds) |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Cable coupler M2,5 (2 pcs) |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
| 1 x | Kwik link with arm M5xM2,5xL30 |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
| 1 x | Cable coupler M2 (10 uds) |
| 1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
| 1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | 4 mm M3 red control terminal (4 pcs) |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 3 x | Pine wood slat 3.0x7.0x1000 mm |
| 2 x | Pine wood slat 2.0x10.0x1000 mm |
| 2 x | Beech dowels 2.0 x 1000 mm |
| 2 x | Beech dowels 4.0 x 1000 mm |
| 2 x | Pine wood slat 5.0x5.0x1000 mm |
| 2 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 2 x | Walnut wood slat 3.0x3.0x1000 mm |
| 3 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 2 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | DYNAMOMETER S-1580 |
| 2 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 2 x | OBECHI sheet 2.0x3.0x1000 mm |
| 3 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 2 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 2 x | Liston HAYA 3 x 10 x 1000 mm |
| 2 x | Beech dowels 10 mm x 1000 mm |
| 2 x | Linden wood slat 2.0x2.0x1000 mm |
| 2 x | Walnut wood slat 1.5x1.5x1000 mm |
| 2 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 2 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 2 x | BALSA leading edge 8x10x1000 mm |
| 1 x | 25 mm reinforced hinge |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Cap Hispano Aviación |
| 1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | Conector XT-150 6mm (Set: 5 pares) |
| 1 x | Straightened rod Ø 7.0 mm x 1000 mm |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 2 x | Birch plywood plate 600x300x1.5 mm |
| 2 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
| 1 x | Threaded coupler M3 (10 uds) |
| 2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 2 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
| 2 x | BALSA trip 10x10x1000 mm |
| 3 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 2 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 2 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 2 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | 20 g tin paste |
| 2 x | Release wax 250ml |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | Paint gun for sprays |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | |
| 2 x | 500 ml sealer (DOPE) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Spray EC Red 400ml |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | PIX Hawk with accesories |
| 2 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
| 1 x | White large kwik link (10 pcs) |
| 1 x | Turnbuckle M1,6x17/27 (2pcs) |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
| 1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | 6,4x1000 mm 2:1 red termoretract tube |
| 1 x | 6,4x1000 mm 2:1 green termoretract tube |
| 1 x | MYLAR film A350 (1000x500 mm) |
| 1 x | Oracover Black 2 m |
| 1 x | Head core |
| 1 x | Screws flush mount M2 |
| 1 x | Head lower part |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Spray Graphit 33 |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Painting GHT Lexan Black 150 ml |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 2 x | Adapter 4,0 mm M6 |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 2 x | Adapter 3,2 mm M6 |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
| 1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | Adapter 3,2 mm M8 |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | 3 mm Long Prop Adapter M5 |
| 1 x | 3 mm Short Prop Adapter M5 |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 1 x | Adapter 5,0 mm M8 |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | 2,3 mm Prop Drive Günther M4 |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 2 x | 2 mm Prop Adapter M5 |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Adapter 4,0 mm M8 |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Allen wheel collar M3x3 |
 |
| 2,377.48EUR |
