| 1 x | Hovercraft sailcloth |
| 1 x | |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | PIX Hawk with accesories |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 2 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 2 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 2 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 3 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
| 2 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
| 1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
| 1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
| 1 x | Silicone red 0,25 mm² wire (25 m) |
| 1 x | 1 m servo "Premium" wire (white/red/blue) |
| 1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
| 1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
| 1 x | 100m servo "Premium" wire (white/red/blue) |
| 1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
| 2 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
| 2 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
| 1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
| 1 x | Black silicone 0,25 mm² wire (25 m) |
| 1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
| 1 x | White silicone 0,25 qmm wire (150 m) |
| 2 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
| 2 x | 10m servo "Premium" wire (white/red/blue) |
| 1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
| 2 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
| 1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Paramotor Trike XL |
| 2 x | Hot Glue Stick GREEN |
| 1 x | Sun Cover PC 21 XXL (JMB Jets) |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Avia (Top Model) |
| 2 x | BABY glider (Aero-naut) |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | ASG 32 560 mm |
| 1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
| 1 x | Wings Bags JEEMO |
| 1 x | Aero-Master Cabine (Aero-naut) |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | Fascination 3600 mm, Canopy (Top Model) |
| 1 x | Avia spare blue cockpit (Top Model) |
| 1 x | Astra (Top Model) |
| 1 x | EASYGLIDER 4 RR |
| 2 x | Profile ABS triangular 6.0x1000 mm 90º |
| 2 x | Profile ABS half cane 6.0x1000 mm |
| 1 x | FANTASY ARF 3.2m |
| 1 x | IKURA GPS 4.28 m |
| 1 x | Motor RACE 20 Navy 12v |
| 1 x | Aqua RACE 70 (without motor) |
| 1 x | 290x4 mm M4 shaft ship |
| 1 x | 290 mm 290 mm M5x18 mm shaft ship |
| 1 x | 38 mm fenders (10 pcs) |
| 1 x | 40,0 mm hydro-propeller (left hydropropeller) |
| 1 x | ESC Actro-Marine 30A |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | VAGABOND 1500 mm ARF V2 (Red) |
| 1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
| 1 x | 290 mm M4 7/8x212 mm shaft ship |
| 1 x | Motor ACTRO 35-4-1100 |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
| 1 x | 29,0 mm propeller (rigth propeller) |
| 1 x | TAKEO 3.6m electric |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Jeti Black cap |
| 1 x | 28 mm turnbuckle |
| 1 x | Aeronaut Baumbeschlag (Ms) 10 mm |
| 1 x | Glider Ka 7 Red (2540mm) |
| 2 x | VAGABOND 1500 mm ARF V2 (Blue) |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
| 1 x | Surprise XII Rudder (Freudenthaler) |
| 1 x | Regulador Actro-Marine 60A |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | FOX ARF 2000 mm Red (Hacker Model) |
| 1 x | 12 mm mast holder |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 2 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Kit hydraulic brake |
| 1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
| 1 x | Skies 2x 335 mm + 1x Esqui 250mm |
| 1 x | Landing gear frontal support 25x32x16 |
| 2 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 2 x | Motor DLE 430 cc - Paramotors |
| 1 x | Release film 100 cm x 50 m |
| 1 x | Fiberglass plate 350x150x4.0 mm |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | Motor DLE 200cc Premium Muffler |
| 1 x | Fiberglass plate 620x540x3,2 mm |
| 2 x | Fresa corte diamante Ø 2.3mm (bola) |
| 2 x | Fresa corte diamante Ø 2.7mm (bola) |
| 2 x | 2,5x60 mm allen screwdriver |
| 1 x | Sealing Iron Sleeve PROF |
| 1 x | Propadapter for motor A60-V2 |
| 2 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
| 1 x | Cable adapter iCharger |
| 1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
| 1 x | Propadapter for motor A50 |
| 1 x | Motor MVVS 5.6/690 GLIDER |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Lead with adhesive (2 pcs) |
| 1 x | Snap short M2 (10 uds) |
| 2 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
| 1 x | One touch canopy lock |
| 1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
| 1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
| 1 x | Cable set PREMIUM, fuselage/wing |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | PPM Encoder Module |
| 1 x | Dust collector for mould cleaning |
| 1 x | |
| 2 x | Steel brush wheel with 2.35mm |
| 1 x | Crystal Universal RX 35.130 Ch 73 |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | EasyFLY Addon |
| 1 x | Crystal Universal RX 35.140 Ch 74 |
| 1 x | Micro Crystal RX 35.010 Ch 61 |
| 1 x | DINO Glider ARC |
| 1 x | Ion Pro NG electric with flaps RED Fluor (JP Model) |
| 1 x | MYSTIQUE 2.9 m ARF |
| 1 x | PT 22x10 EL Propeller |
| 1 x | Turbina JetsMunt M122 NG |
| 1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
| 1 x | Glidder Mü13e (Bergfalke) |
| 1 x | X-RAY Micro QR (Fuselage with canopy) |
| 1 x | TAKELHAKEN Ms 12x10 mm |
| 1 x | Smoke set "S" |
| 1 x | Soporte barandilla madera 16 mm (10 pcs) |
| 1 x | Propeller RABOESCH M4 70 mm (5 Blades) (Right) |
| 1 x | Propeller AERO-NAUT M4 73 mm (7 Blades pr) (Right hydropropeller |
| 1 x | Life guard Ø 17,0 mm (10 pcs) |
| 1 x | Propeller AERONAUT M4 50 mm (3 Blades pr) (Left hydropropeller) |
| 1 x | Canopy Latch |
| 1 x | 140 mm rods set for direction control |
| 1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Digital scale up to 40 kg |
| 1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
| 1 x | Sealing Iron Profi LCD |
| 1 x | EC-Cutter |
| 1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
| 1 x | Kwik link unmount tool |
| 1 x | Goma arrancador Ø36 mm x 30 mm |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | Hot Glue Stick RED |
| 1 x | 25 mm Sandpaper file |
| 1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
| 1 x | Mini-handed clamp |
| 1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
| 1 x | Esc MasterBasic 70SB |
| 1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
| 1 x | Backmountset complete A40 |
| 1 x | Xoar Electric Beechwood Prop 24x8 |
| 1 x | FESTO Filter 4 mm |
| 1 x | Racor 4/4 mm |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
| 1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
| 1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
| 2 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
| 1 x | Cable Cargador FUTABA |
| 1 x | Ion Pro, Wing joiner (JP Model) |
| 1 x | MB-339 Aerofoam G2 "Italian Air Force Camu" |
| 1 x | 75 mm |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
| 1 x | Railing L250 mm (10 pcs) |
| 1 x | Liferaft 47 mm |
| 1 x | Motor RACE 720 Navy 12v |
| 1 x | Race Outboard MERCURY type A |
| 1 x | Hinge 4x14 mm (20 pcs) |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | STEUERRAD met. 25 mm |
| 1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
| 1 x | Bronze bearings Ø 4 x Ø 8 x 8 mm |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | Propeller 3BL 50 mm M4 Plastic |
| 1 x | 36,0 mm propeller (rigth propeller) |
| 1 x | 33,0 mm propeller (left propeller) |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Cockpit plastic closing |
| 1 x | 2,3 mm Prop Drive Günther M4 |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Propeller balancer |
| 1 x | Digital weight, angle and balance meter BASIC |
| 1 x | Smart Soldering Iron 110W/230V AC |
| 1 x | Boxed KIT OF 7 Rotary Burrs FINE |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Tachometer HANGAR 9 digital |
| 1 x | Mold plugs XT-90 |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Crimping tool |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Crimping tool |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | 22 mm Cut Disc Proxxon/Dremmel |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
| 1 x | Fresa corte diamante Ø 1.0mm (bola) |
| 1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
| 1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
| 1 x | A50 Backmountset complete |
| 1 x | Battery charging cable XT60 |
| 1 x | EDF Stream-Fan 110mm kv780 |
| 1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
| 1 x | Axle for motor A30-XL V2 |
| 1 x | A50 Backmountset complete |
| 1 x | A50 Backmountset complete V3/V4 |
| 1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
| 1 x | A50 Motor Mount Alu complete set |
| 1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
| 1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
 |
| 39,868.75EUR |
