| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | ABS 500 x 400 x 1 mm (white) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Buy Perforated film 100 cm / 20 m |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 2 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | Spikes Band (5 m) |
| 3 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | 20x200 mm battery rings |
| 1 x | Ball link V1 Ø7 M4/3 (6 uds) |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 2 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | SE Ring 250 mm (2 pcs) |
| 2 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Threaded coupler M3 (10 uds) |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 2 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 2 x | BALSA trip 5.0x5.0x1000 mm |
| 2 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Silent-blocks DLE 170M |
| 1 x | Extension 30 cm (Futaba) |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Fiberglass plate 350x150x2.0 mm |
| 1 x | Extractor piñones 2.3/3.2 mm |
| 1 x | White smoke canister 100 g |
| 1 x | Red smoke canister 65 g |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Recessed MPX connector support (6 pcs) |
| 1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Pulley brass 14/2 (2 pcs) |
| 2 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
| 1 x | Pulley brass 12/2 (2 pcs) |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 2 x | Motor DLE 200cc Std |
| 1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Cable coupler M2,5 (2 pcs) |
| 2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Pulley brass 6/1,5 (2 pcs) |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | Pilot Lotsenboot |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Blades 330mm |
| 1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
| 2 x | Balsa panel 1.5x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Regulador Actro-Marine 80A |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 2 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Pull-Pull complet set with CF rudder double servo arm |
| 1 x | Propeller 12x6 Falcon electric |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
| 1 x | DUPLEX 2.4EX Central Box 320 |
| 1 x | DSM 10 Dual Switch Mixer |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | |
| 1 x | Car Charger DC/DS-16 |
| 1 x | Pulley brass 4/1,5 (2 pcs) |
| 1 x | Turnbuckle M3 33x49 (2pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 2 x | Cable coupler M2 (10 uds) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
| 1 x | Kwik link with arm M3xM2xL24 |
| 1 x | Small Crow DLE-170M |
| 1 x | Micro clevis (10 uds) |
| 1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
| 1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
| 1 x | Glow Plug Clip 1.3 Ah |
| 1 x | Propeller FIALA 15x8 3-Blade |
 |
| 10,799.75EUR |
