| 1 x | 2,4x1000 mm 2:1 green termoretract tube |
| 1 x | Oracover Black 2 m |
| 1 x | 37 mm PVC transparent battery termo-retract (1 m) |
| 1 x | Oracover Azul 2 m |
| 1 x | 1,6x1000 mm 2:1 red termoretract tube |
| 1 x | Oracover Brown 2 m |
| 1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 2 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
| 1 x | 4,8x1000 mm 2:1 blue termoretract tube |
| 2 x | 3,2x1000 mm 2:1 black termoretract tube |
| 1 x | 6,4x1000 mm 2:1 blue termoretract tube |
| 1 x | 1,2x1000 mm 2:1 red termoretract tube |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
| 1 x | Monokote BLANCO jet (1.8x0.65m) |
| 1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | Monokote ROJO misil (1.8x0.65m) |
| 1 x | MYLAR film A350 (1000x500 mm) |
| 2 x | 3,2x1000 mm 2:1 red termoretract tube |
| 1 x | 4,8x1000 mm 2:1 red termoretract tube |
| 2 x | 12.7 mm 2:1 black termoretract tube |
| 1 x | 6,4x1000 mm 2:1 green termoretract tube |
| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 1 x | 12,7x1000 mm 2:1 green termoretract tube |
| 2 x | 1,6x1000 mm 2:1 black termoretract tube |
| 2 x | 6,4x1000 mm 2:1 red termoretract tube |
| 2 x | 2,4x1000 mm 2:1 red termoretract tube |
| 2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 2 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 2 x | Beech dowels 4.0 x 1000 mm |
| 3 x | Carbon fiber rod 12 mm x 1000 mm |
| 2 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 2 x | Carbon fiber rod 20 mmx1000 mm |
| 2 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 2 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 1 x | Carbon fiber rod 14 mmx1000 mm |
| 2 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 2 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 2 x | Carbon fiber rod 0.8 mmx1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 2 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 2 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 2 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 2 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 2 x | Beech dowels 2.0 x 1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 2 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 3 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 2 x | Medidor ángulos y/o incidencias |
| 2 x | SIG Coverall 1.2x4.5 m |
| 2 x | PVC transparent battery termo-retract 70 mm (10 m) |
| 1 x | 19 mm 2:1 black termoretract tube |
| 1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
| 1 x | PVC transparent battery termo-retract 85 mm (1 m) |
| 2 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
| 1 x | Slave-cable USB Easy Sim |
| 2 x | PVC transparent battery termo-retract 51 mm (1 m) |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | 4,8x1000 mm 2:1 black termoretract tube |
| 2 x | Carbon fiber rod 4.0 mmx1000 mm |
| 2 x | Carbon fiber rod 0.5 mmx1000 mm |
| 2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | Sun Cover PC 21 XXL (JMB Jets) |
| 2 x | Ventus 1:4 set of instruments |
| 1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Angle measurer |
| 1 x | White silicone 0,25 qmm wire (150 m) |
| 1 x | Angle of incidence meter |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Propeller balancer |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 2 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 2 x | Oratex Silver 2m |
| 1 x | Oratex White 2m |
| 1 x | SSPS105 Super Hi-Power servo |
| 1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
| 1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
| 1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
| 1 x | Oratex Antik 2m |
| 1 x | Oratex Yellow Cub 10 m |
| 1 x | Gear for D 200 BX |
| 1 x | Futaba 17 mm servo arm with ball link HITEC |
| 1 x | SC NAVY V15R |
| 1 x | Servo GO-1081 MG 45 kg.cm 0.085s/60º |
| 1 x | Oratex Red Fokker 10 m |
| 1 x | Bird (Aero-naut) |
| 1 x | Aqua RACE 70 (without motor) |
| 1 x | Servo GO-02 Digital 1.8g |
| 1 x | Regulador Actro-Marine 60A |
| 1 x | Hitec 38 mm servo arm with ball link |
| 2 x | Oracover Yellow CADMIO 10 m |
| 1 x | Futaba 25 mm servo arm with M3 ball link |
| 1 x | ORACOVER Fluor red (2 m) |
| 1 x | RX external cable for estandar receivers |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | T-Motor U7-V2.0 Kv420 |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | Optotronix Aurora Plug |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | XH male balance (4S) connector (2 pcs) |
| 1 x | XH female balance (4S) connector (2 pcs) |
| 1 x | Connectors banna oro 4 mm (M/F) |
| 1 x | Connectors DEANS (T) |
| 1 x | Ply-Span 450x600/13g Orange |
| 2 x | Oracover Yellow CADMIO 2 m |
| 1 x | Oracover Red 2 m |
| 1 x | ALPHA 1000mm BL ARTR |
| 1 x | Oracover Yellow CUB 2 m |
| 1 x | PVC transparent battery termo-retract 195 mm (1 m) |
| 1 x | Oracover White 10 m |
| 1 x | ORACOVER transparent Yellow (10 m) |
| 1 x | Futaba 38 mm servo arm |
| 1 x | Oracover White 2 m |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | Oratex Natural White 2m |
| 1 x | FUTABA 20 mm servo arm with ball link |
| 1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
| 1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
| 1 x | PIT (Aero-Naut) |
| 1 x | Oratex Natural White 20m |
| 1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
| 1 x | Electronic fog horn |
| 1 x | Oracover CHROME 2m |
| 1 x | Futaba 30 mm servo rounded arm |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Futaba 2x20 mm servo double arm |
| 1 x | Reguladro ACTROCON 60A |
| 1 x | Ply-Span 450x600/13g White |
| 1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
| 1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
| 1 x | HITEC 17 mm servo arm with ball link HITEC |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 2 x | Beech dowels 3.0 x 1000 mm |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | Head core |
| 1 x | LA500 housing-upper cyclic |
| 1 x | Cierva C30 Elevator |
| 1 x | LA500 nose |
| 1 x | LA500 cyclic central part |
| 1 x | LA500 pre-rotation gear hub |
| 1 x | Head lower part New |
| 1 x | LA500 Blades |
| 1 x | Blades 330mm |
| 1 x | LA500 tail empennage |
| 1 x | Grub screw M3x3 shouldered (2 pcs) |
| 1 x | Head spacer |
 |
| 6,278.45EUR |
