| 2 x | Straightened threaded rod M3 - 1m |
| 3 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Straightened threaded rod M2-1m |
| 2 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 3 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 2 x | Brass rod Ø 1.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 4 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 2 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 3 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 3 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 3 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 2 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 3 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | DYNAMOMETER S-1580 |
| 3 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | Optical RPM Sensor |
| 2 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 2 x | Flat Connector 4.0 mm x 1000 mm |
| 3 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 2 x | ABS angle 1.5x1.5x1000 mm |
| 2 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 3 x | ABS "T" angle 10.0x10.0x1000 mm |
| 2 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 2 x | ABS "T" angle 2.0x2.0x1000 mm |
| 2 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 3 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 2 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 2 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | CM-3 |
| 2 x | JETImodel SINGLE BEC |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Circlick securite |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 2 x | 30 cm BEC cable (female) |
| 1 x | CC 05 |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Bungee HLG Premium |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | |
| 2 x | Ring 320 mm length (5 pcs) |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | 20x200 mm battery rings |
| 2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | Spikes Band (5 m) |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Tape GFK 38 mm |
| 1 x | Tape GFK 50 mm |
| 2 x | SE Ring 300 mm (2 pcs) |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | USB Mini Camera endoscope |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 3 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | ABS rectangular profile 12x6.0x1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 2 x | Profile ABS Square 1 x 1000 mm |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 3 x | Profile ABS triangular 4.0x1000 mm 60º |
| 2 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 2 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | Profile ABS half cane 4x1000 mm |
| 2 x | Profile ABS half cane 3x1000 mm |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 2 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
| 1 x | Straightened rod Ø 7.0 mm x 1000 mm |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m |
| 1 x | Wheel FEMA 178 mm / 8 mm |
| 1 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
| 1 x | 4 blades set |
| 1 x | Interruptor RX/Batterie |
| 1 x | Wheel Ø 90 mm (1 ud) Electron Retracts |
| 2 x | Magnetic Interruptor MULTIPLEX |
| 2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Tail tube RAINBOW |
| 1 x | Blade Holder Full (3 blades) |
| 1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
| 1 x | Autogyro Cierva C30 Spain |
| 1 x | Mudguard for 140/165 mm wheels |
| 2 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
| 1 x | Wing bolts M6 Steel screw Red (2 pcs) |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 2 x | Wheel collar 5 mm Ø (4 uds) |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
| 2 x | Snap pin for micro clevis (10 uds) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 2 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Kit hydraulic brake |
| 2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS |
| 2 x | Aqua RACE 70 (without motor) |
| 1 x | Motor ACTRO 50-2-760 |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | 20 mm carbon horn |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Window mounting channel 5m |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Extension 6 lipos XH > EH |
| 1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | MPS Gas-Cap-Powerswitch |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Wheel FEMA 82 mm / 5 mm |
| 1 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
| 1 x | Nose wheel 62 mm |
| 1 x | 102x26 Ø6.0 mm aluminium core wheel |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 2 x | Prolonguer for Balancer Thunder Power 6S |
| 1 x | Screw M3x16 |
| 1 x | Head upper part |
| 1 x | Blade holder center |
| 1 x | Head lower part |
| 1 x | Ball joint long |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
| 1 x | Profile ABS triangular 6.0x1000 mm 90º |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Sebart 2.2 m WHITE/BLUE (SebART) |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 2 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | Rubber profile 6-2 mm 2M |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Profile ABS triangular 4.0x1000 mm 90º |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 2 x | Profile ABS half cane 8.0x1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Profile ABS half cane 7.0x1000 mm |
| 1 x | Sukhoi 29S 2,6 m Yellow/Black (SebART) |
| 1 x | EDGE 540-A 74" (1880 mm) |
| 1 x | EDGE 540-A 105" (2660 mm) |
| 1 x | ULTRA STICK 30 cc ARF |
| 1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | Horn DUBRO 1/2A |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Propeller electric carbon 8.5x6 |
| 1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
| 1 x | 6 mm M3 variable horn |
| 1 x | Propeller electric carbon 10x7 |
| 1 x | Propeller POWER-PROP 12x9 |
| 1 x | Fuselage Autogyro RAINBOW |
| 1 x | Motor ACTRO 35-4-1100 |
| 1 x | Motor ACTRO 28-4-880 |
| 1 x | SC NAVY V15R |
| 1 x | Rudder forward 70x28 "type Kato" |
| 1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
| 1 x | Medium extra-strong control horn with bearing 2,8x24 |
| 1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
| 1 x | Head core bushing |
| 1 x | 90x45 mm hard foam KOVO wheel |
| 1 x | Landing gear axle Ø 5 mm (2 uds) |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Mudguard wheels 112/127 mm |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | CC 01 |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | CC 02 |
| 1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
| 1 x | Brake for 140 mm wheels |
| 1 x | AXI 2204 Multicopter |
| 1 x | 1804 2400KV Brushless Motor Qav 250 mini |
| 1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
| 1 x | SBEC Jeti |
| 1 x | DSM 10 Dual Switch Mixer |
| 1 x | Propeller POWER-PROP 11x8 |
| 1 x | DUPLEX 2.4 EX MVario2 |
| 1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
| 1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
| 1 x | Propeller POWER-PROP 10x7 |
| 1 x | Teacher / Student Cable |
| 1 x | DUPLEX 2.4EX Central Box 210 |
| 1 x | PROPELLER ELECTRIC glass 9,5x6 |
| 1 x | Extension 2/3 lipos JST - JST/C |
| 1 x | DUPLEX 2.4EX MAlti (Rev.2) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Regulador Actro-Marine 60A |
| 1 x | Electronic fog horn |
| 1 x | ROOKIE 20Amp (25) A controller |
| 1 x | BOX-Setup Actro-marine |
| 1 x | Motor ACTRO 35-4-790 |
| 1 x | Motor RACE 720 Navy 12v |
| 1 x | Race Outboard MERCURY type A |
| 1 x | Fueraborda RETRO |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Small adjustable control horn with bearing |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Short adjustable control horn 3x24 |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
| 1 x | Long horn 50x26 |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Small aluminium horn red (2pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
| 1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
| 1 x | RH long aluminium horn (2pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Micro control horn (2 pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
| 1 x | Battery plate |
| 1 x | Baering 3x8x4 |
| 1 x | LA500 rotor head shaft |
 |
| 11,230.69EUR |
