| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | CM-3 |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | Circlick securite |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | CC 05 |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 2 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 2 x | CC 03 |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | USB HLS prog. interface |
| 1 x | Dean "T" - Futaba Adapter |
| 2 x | JETImodel SINGLE BEC |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 2 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | TrainerCord (master-learner) |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | BEC 3A FOXY |
| 1 x | CC 02 |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | |
| 2 x | SE Ring 450 mm (2 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 2 x | Spikes Band (5 m) |
| 2 x | SE Ring 480 mm (2 pcs) |
| 1 x | Cinta Goldfix 1m |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | Tape GFK 50 mm |
| 2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | 20x200 mm battery rings |
| 1 x | Xplorer2 anemometro |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 2 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 2 x | ABS angle 3,0x3,0x1000 mm |
| 2 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 2 x | T-Connector 4.0 mm x 1000 mm |
| 2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 2 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 1 x | 1,6x1000 mm 2:1 red termoretract tube |
| 1 x | 25 mm reinforced hinge |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | 12V Car Adapter |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | DPSI Ampere battery backer |
| 1 x | JETImodel Addcap 1640 |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Cabling for Fox MDM1 wings |
| 1 x | SBEC 30 D |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | MAX BEC |
| 1 x | UBEC 6A KAVAN |
| 1 x | Long Switch On/Off micro |
| 1 x | Interruptor RX/Batterie |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | SE Ring 300 mm (2 pcs) |
| 2 x | Xplorer3 anemometro |
| 1 x | Xplorer4 anemometro |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Profile ABS half cane 4x1000 mm |
| 1 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | 1/12 Pilot "Tom" |
| 1 x | 1/6 Pilot "John" |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | Carbon plate 350x150x0.5 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | Fiberglass 280 g/m² 5000x1000 mm |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Glass fibre sleeve Ø 20 mm |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | Motor DLE 200cc Premium Muffler |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Dummy motor GPW Wasp Scale 1/4 |
| 1 x | 25 mm Sandpaper file |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 2 x | ABS 500 x 400 x 1 mm (white) |
| 1 x | Carbon plate 350x150x4.0 mm |
| 1 x | Chopped glass fibre strands 0.2 mm |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Fiberglass plate 350x150x0.5 mm |
| 1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
| 1 x | 110x55 mm SLH KOVO wheel |
| 1 x | 35x14 mm hard foam KOVO wheel (2 pcs) |
| 1 x | 20 mm tail wheel for 0,5-1 Kg models |
| 1 x | Blade holder lower |
 |
| 9,454.34EUR |
