| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 3 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Long pinned hinge (6 uds) |
| 2 x | Large flex hinge (12 uds) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 2 x | Gates hinge aluminium (1 pcs) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Gates hinge |
| 2 x | Long pinned hinge (12 uds) |
| 1 x | 25 mm reinforced hinge |
| 2 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 2 x | Fast'n EZ-CA-Hinge (12 uds) |
| 3 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 2 x | Medium pin type hinge (12 uds) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 3 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Canopy Latch |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 2 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 2 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 2 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Covered closure or fairings |
| 2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Cockpit plastic closing |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | One touch canopy lock |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 2 x | Gates hinge black 30x16 mm (2 pcs) |
| 2 x | Flap hinge (6 pcs) |
| 1 x | Miniature brass strap hinge, 1 m |
| 2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 3 x | Brass rod Ø 1.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 3 x | Jeti Black cap |
| 2 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 3 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 2 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 1 x | Extension 100 cm (Futaba) |
| 1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | Optotronix Aurora Plug |
| 1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
| 1 x | 200m servo "Premium" wire (white/red/blue) |
| 1 x | Blind nut M5 (10 pcs) |
| 2 x | Indoor hinge with servo arm integraded |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Allen wheel collar M3x5 |
| 2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
| 1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 2 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
| 2 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
| 1 x | 5 mm Prop Adapter CN-Spinner |
| 1 x | Aero-Master Fuselage (Aero-naut) |
| 1 x | Aero-Master Wings (Aero-naut) |
| 1 x | Tube Pitot to PIXHAWK |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Xplorer3 anemometro |
| 2 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 2 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
| 1 x | Canopy Astra |
| 2 x | Bidule 111 3000 mm Canopy |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
| 1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Challenger ARF (Top Model) |
| 1 x | Electric spoiler 300 mm (2 pcs) |
| 1 x | ARTIST 1.560 mm |
| 1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
| 1 x | Avia spare fouselage CF reinforced (Top Model) |
| 1 x | Propeller Pleg CAM Carbon 12x8 |
| 1 x | Motor OS 81 FS 4T |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Motor A40-10S V4 14-Pole |
| 1 x | A50 Backmountset complete |
| 1 x | Parachute XTRALITE S |
| 1 x | Foam plastic plates (310x210x8 mm) |
| 1 x | Bearing block for noseleg landing gear |
| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | Porpeller HUNTER 400 |
| 1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
| 1 x | Propeller CFK 15x15 |
| 1 x | Propeller Pleg CAM Carbon 13x10 |
| 1 x | Propeller Pleg CAM Carbon 12.5x9 |
| 1 x | Propeller Pleg CAM Carbon 10x4 |
| 1 x | Propeller Pleg CAM Carbon 12x9 |
| 1 x | Propeller CFK 12.75x13 |
| 1 x | Propeller CFK 13x7.5 |
| 1 x | Propeller Pleg CAM Carbon 10x7 Reverse Rotation |
| 1 x | SLICK 360-A 104" (2640 mm) |
| 1 x | Propeller CFK 18x16 |
| 1 x | Thread locker "Medium" 10 g |
| 1 x | Propeller Pleg CAM Carbon 11x4 |
| 1 x | Propeller Pleg CAM Carbon 11x10 |
| 1 x | Propeller Pleg CAM Carbon 10x7 |
| 1 x | Motor OS MAX 160 AX |
| 1 x | Motor OS FS 95 AX |
| 1 x | Motor OS FS 95 V 4T |
| 2 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Propeller Pleg CAM Carbon 15x6 |
| 1 x | Motor A20-20 L EVO |
| 1 x | A40-10S V2 8-Pole + 6,7:1 PG |
| 1 x | Axle for motor A20-S (3 uds) |
| 1 x | Motor A60-6XS V4 28-pole kv370 |
| 1 x | Foam plastic plates (310x210x5 mm) |
| 1 x | 28 mm tailwheel unit |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | 100 mm rods set for direction control |
| 1 x | Angle of incidence meter |
| 1 x | 38 mm Alu spinner 5 mm pleg. propeller |
| 1 x | Albatros red/white (Top Model) |
| 1 x | BULLIT Wing 1095 mm |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 1 x | 50x45 mm micro-mini servo cover |
| 1 x | Angle measurer |
| 1 x | Gear set HITEC HS-225 |
| 2 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Cockpit metalic closing |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | 20 mm tail wheel for 0,5-1 Kg models |
| 1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 1 x | MPX PCB "Gender-Changer (5 pcs) |
| 1 x | 30 mm Alu spinner 3 mm pleg. propeller |
| 1 x | 57 mm micro-mini servo cover |
| 1 x | Astra wing Joinner (Top Model) |
| 1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
 |
| 7,355.64EUR |
