| 2 x | ABS tube 5.0x3.0x1000 mm |
| 2 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 3 x | ABS tube 12.0x10.0x1000 mm |
| 2 x | ABS tube 9.0x8.0x1000 mm |
| 2 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 3 x | ABS tube 5.0x4.0x156 mm |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 2 x | ABS tube 3.0x1.0x1000 mm |
| 2 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 2 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 2 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 3 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | Horn for flap control (1 pcs) |
| 1 x | RH long aluminium horn (2pcs) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 2 x | Xplorer3 anemometro |
| 1 x | Xplorer1 anemometro |
| 1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 2 x | 1/12 Pilot "Tom" |
| 1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 1 x | 1/4 Pilot "Mike" |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 2 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 2 x | 1/10 Pilot "Jimmy" |
| 2 x | Piloto JET 1:3,5 |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | 1/12 Pilot "Fighter" |
| 1 x | 1/6 Pilot "Cindy" |
| 1 x | Pilot "Anthony" (Slimline) |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | Pilot "Adolf" Legends Series (Slimline) |
| 1 x | 1/10 Pilot "Jack" |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 2 x | 1/6 Pilot "Buddy" |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | Pilot "Goose" (Slimline) |
| 1 x | Pilot "Dick" Legends Series (Slimline) |
| 2 x | 1/6 Pilot "Garry" |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | Piloto Jet "Green" 1/6 Scale |
| 1 x | Piloto jet 130 mm |
| 1 x | Piloto Jet "Red" 1/6 Scale |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | Quicklock washer 3 mm (10 pcs) |
| 1 x | Quicklock washer 3.5 mm (10 pcs) |
| 1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
| 2 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
| 1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Suncover 100cc Red |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 2 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 2 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
| 1 x | Optical RPM Sensor |
| 2 x | Foam plastic plates (310x210x3 mm) |
| 1 x | Fiberglass plate 350x150x2.0 mm |
| 1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
| 1 x | Keypad ALTIS V4 |
| 1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
| 1 x | Fiberglass plate 350x150x1.5 mm |
| 1 x | Altimeter Altis V4 |
| 1 x | Telemetry interface ALTIS 20 cm |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
| 1 x | Fiberglass plate 1200x1000x0,2 mm |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | Glass fabric 25 g (2 m²) |
| 1 x | Film release agent PVA 25 ml |
| 1 x | Fiberglass plate 620x540x0,2 mm |
| 2 x | Charger FUTABA SQN30W12P-08 220v |
| 1 x | Switch Cap L (Red) |
| 1 x | SyRen 10A 6V-24V Regenerative Motor Driver |
| 1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
| 1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
| 1 x | Three-function control switch by FUTABA |
| 2 x | Decorative caps, multicoloured |
| 1 x | Switch Cap M (blue) |
| 1 x | Switch Cap L (black) |
| 1 x | Three-function control switch by FUTABA |
| 1 x | Futaba Radio Case |
| 1 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
| 1 x | Xplorer4 anemometro |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | Pilot JAN 1/4 Saiplanes |
| 1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Canopy Latch |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Conector JAPAN G2 Set 5 pares |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 1 x | Foam plastic plates (310x210x8 mm) |
| 1 x | Fiberglass tube 6/4x1000mm |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
| 1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | Foam plastic plates (310x210x5 mm) |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | 28 mm tailwheel unit |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Distanzstück motor OS 120 AX |
| 1 x | Adjustable brass horn threaded M3 |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Bearing block for noseleg landing gear |
| 1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
| 1 x | 1/12 Pilot "Cougar" |
| 1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
| 2 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
| 2 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | Electric spoiler 300 mm (2 pcs) |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
| 1 x | Telemetry interface ALTIS to Futaba |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Cabel "Y" 30 cm (Futaba) |
 |
| 7,302.44EUR |
