| 1 x | Jun-Si iCharger 4010 Duo |
| 2 x | BALSA triangular 6x6x1000 mm |
| 2 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 3 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 2 x | Pine wood slat 10x10x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 2 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Paint gun for sprays |
| 1 x | Universal Colour Paste white 50 g |
| 2 x | Spray YELLOW Inca Lexan 150ml |
| 2 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | 1000 ml sealer (DOPE) |
| 1 x | Xplorer3 anemometro |
| 1 x | Xplorer1 anemometro |
| 2 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
| 1 x | Motor DLE 200cc Premium Muffler |
| 2 x | 500 ml sealer (DOPE) |
| 2 x | 20 g tin paste |
| 1 x | Partall paste 650 g |
| 1 x | Silicone red 0,25 mm² wire (25 m) |
| 1 x | Flat washer 3.2 mm (20 pcs) |
| 1 x | 10m servo "Premium" wire (white/red/blue) |
| 1 x | Power supply NT 25 Amp. |
| 1 x | Hovercraft sailcloth |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Support Pitot JETI |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Fail Safe air retract |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | Landing gear strap medium (4 uds) |
| 1 x | Quick hose connector 4-4 mm |
| 1 x | PRO-HV Dual Action Valve |
| 1 x | Neumatic retractable landing gear (Aero-Naut) |
| 1 x | Skies 2x 335 mm + 1x Esqui 250mm |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 2 x | Balsa panel 6.0x100x1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 2 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Motor DLE 430 cc - Paramotors |
| 1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | Nitroverdu 500 ml |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 2 x | Silent-blocks DLE 170M |
| 1 x | Spray EC Red 400ml |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Altimeter Altis V4 |
| 3 x | Propeller G-Sonic 20x8 |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 3 x | Transmitter Crystal 35 Mc/s Ch 62 |
| 3 x | Foreman, scale 1:32 |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 3 x | Receiver Crystal 35 Mc/s Ch 62 |
| 4 x | Quick hose connector 6-4 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Coupling bush 5 - 5 mm |
| 2 x | Distanzstück motor OS 120 AX |
| 3 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
| 1 x | USB Charger 120-240V AC |
| 1 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | Red smoke canister 140 g |
| 1 x | Baal link 4/14/4 (5 pcs) |
| 1 x | Red smoke canister 100 g |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | Blue smoke canister 140 g |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | Remote electric ignition system |
| 1 x | Green smoke canister 140 g |
| 1 x | Smoke set "S" |
| 1 x | Blue smoke canister 100 g |
| 1 x | JP Hobby ER-120 Tricycle FELIX JR |
| 1 x | Head spacer |
| 1 x | LA500 pilot-seat set |
| 1 x | Blade holder upper |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | Propeller MENZ-S 18x8 3-Blades |
| 1 x | FALCON 24X9 CARBON PROPELLER (GAS) |
| 1 x | A60 Motor Mount Alu complete set |
| 1 x | Shaft for A60-L (140mm) |
| 1 x | Bearing block for noseleg landing gear |
| 2 x | Receiver GRAUPNER GR-12 HoTT |
| 1 x | 28 mm tailwheel unit |
| 3 x | MZ-18, 9 Channel HoTT |
| 1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
| 1 x | Ring 320 mm length (5 pcs) |
| 3 x | MZ-10, 5 Channel HoTT |
| 1 x | SERVO DES 588 BB MG |
| 3 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
| 2 x | SERVO DES 568 MG |
| 2 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 2 x | Spinner fixed propeller 42 mm / 5,0 mm |
| 1 x | Transmitter GRAUPNER MZ-24 Pro |
| 2 x | Beech dowels 2.0 x 1000 mm |
| 2 x | Flap hinge (6 pcs) |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | FALCON 25X9 CARBON PROPELLER (GAS) |
| 1 x | Painting GHT Lexan Black 150 ml |
| 1 x | Landing gear retract neumatic (Jet Legend) |
| 1 x | Propeller MENZ-S 20x6 |
| 1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
| 1 x | JETImodel Addcap 1640 |
| 1 x | Propadapter for motor A50 |
| 1 x | Propadapter for motor A50-V3 |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Axle for motor A20-S (3 uds) |
| 1 x | FesEx-Uni8 System |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | FesEx-Uni6 System |
| 1 x | Battery charging cable XT60 |
| 1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
| 1 x | Axle for motor A30-XL V2 |
| 1 x | JETImodel Addcap 820 |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | SERVO DES 707 BB MG, Pignons |
| 2 x | POLARON EX 800w charger |
| 2 x | Spikes Band (5 m) |
| 1 x | Receiver replacement antenna, approx. 85 |
| 3 x | MZ-12, 6 Channel HoTT |
| 1 x | Straightened rod Ø 7.0 mm x 1000 mm |
| 2 x | SERVO DES 806 Pignons |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | Hose clips 6 mm |
| 1 x | Foam plastic plates (310x210x5 mm) |
| 1 x | SERVO DES 806 Pignons |
| 2 x | Propeller Pleg CAM-Prop 8x6 |
| 1 x | Adjustable brass horn threaded M3 |
| 2 x | Soporte metal para servos |
| 1 x | DJI Mavic Air Fly More Combo |
| 1 x | Receiver GRAUPNER GR-16 HoTT |
| 2 x | Spinner fixed propeller 60 mm / 5,0 mm |
| 2 x | Receiver replacement antenna, approx. 15 |
| 1 x | Decorative caps, multicoloured, short |
| 1 x | Switching module high voltage SXH |
| 2 x | Mini Infrared Thermomiter |
| 2 x | Foam plastic plates (310x210x2 mm) |
| 1 x | 40,0 mm hydro-propeller (left hydropropeller) |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Transmitter Crystal 35 Mc/s Ch 77 |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 2 x | Servo HBS 690BB HV Digital |
| 1 x | Foam plastic plates (310x210x3 mm) |
| 1 x | Canopy Latch |
| 1 x | VARIO module Hott |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Motor DLE 200cc Std |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | SERVO DES 707 BB MG |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | UHU hart 35 g |
| 1 x | Propeller hub spacer 8/5.5 |
| 1 x | Charger LiPo Charger4 |
| 1 x | SERVO DES 658 BB MG |
| 1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
 |
| 21,039.43EUR |
