| 2 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
| 1 x | White gelcoat 1 Kg |
| 1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
| 2 x | resin-hardener package L-385 with hardener H-385 (875 g) |
| 2 x | Hardener P-25, canister 2.5Kg |
| 1 x | resin-hardener L-385 H-385 (5000 g) |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
| 2 x | resin-hardener L-385 H-385 (1250 g) |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
| 1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
| 2 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
| 1 x | resin-hardener L-385 H-385 (625 g) |
| 1 x | Epoxy Resin L (2.5 Kg) |
| 2 x | Hardener Aero EPH 161 (250 g) |
| 2 x | resin-hardener package L-385 with hardener H-385 |
| 1 x | Optical RPM Sensor |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 2 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
| 2 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
| 2 x | Cotton Flocks, bag/ 500 g |
| 2 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
| 1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
| 1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | White silicone 0,25 mm² wire (25 m) |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
| 1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 1 x | Parachute P4 |
| 1 x | Conector MT-60 (pair) |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | MEKP Harderner 100 g |
| 1 x | Glow Plug Clip 1.3 Ah |
| 1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
| 1 x | Glass Bubbles (0,12 g) 350 ml |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Circlick securite |
| 1 x | CC 05 |
| 1 x | Metal gear set for HS85MG/5085MG |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Cotton Flocks, bag/ 7 Kg |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Connector CAN 15 |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 3 x | Bidule 111 3000 mm Canopy |
| 2 x | Avia spare fouselage CF reinforced (Top Model) |
| 3 x | 90x60 mm standart servo cover |
| 2 x | Avia (Top Model) |
| 2 x | 7 mm gas motor standoff |
| 3 x | Angle measurer |
| 2 x | Albatros ,spare cockpit (Top Model) |
| 2 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
| 2 x | Albatros red/white (Top Model) |
| 1 x | Propeller APC 11x10 Electric |
| 1 x | 16x10 tree blades propeller Master Airscrew |
| 1 x | Propeller APC 11x3.8 SF |
| 1 x | Propeller APC 10x4.7 |
| 1 x | Propeller APC 13x6.5 Electric |
| 1 x | Propeller electric carbon 10x8 |
| 1 x | Propeller electric carbon 9.5x6 |
| 1 x | Propeller POWER-PROP 10x7 Izda |
| 1 x | Propeller APC 11x7 SF |
| 1 x | Propeller electric carbon 10x6 |
| 1 x | Propeller APC 13x8 Electric |
| 1 x | Propeller APC 14x12 Electric |
| 1 x | Propeller APC 10x10 Electric |
| 1 x | Porpeller HUNTER 400 |
| 1 x | 8x6 tree blades propeller |
| 1 x | 15x7 tree blades propeller LEFT |
| 1 x | Propeller POWER-PROP 12x8 |
| 1 x | Propeller POWER-PROP 10x7 |
| 1 x | Propeller electric carbon 8.5x6 |
| 1 x | Propeller APC 10x5 Electric Pusher |
| 2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Prolonguer for Balancer Thunder Power 6S |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
| 3 x | Astra (Top Model) |
| 1 x | Silicone black 1,5 qmm wire ( 1 m) |
| 1 x | 12.7 mm 2:1 black termoretract tube |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
| 1 x | 3,2x1000 mm 2:1 red termoretract tube |
| 1 x | 2,4x1000 mm 2:1 black termoretract tube |
| 1 x | Servo slow down unit (0,7-14,7 sec ) |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Three-position switched channel, short |
| 1 x | MAX BEC 2D plus EX |
| 1 x | SPS 70V 140/280 A |
| 1 x | Multi-adapter balancer JST/C - TP |
| 1 x | SPARK Switch 7.4v |
| 1 x | MPS Gas-Cap-Powerswitch |
| 1 x | USB interface ALTIS |
| 1 x | SBEC 40 |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Sheet Depron Aero 1250x800x3 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Teflon rollers 80 mm x 15 mm Diam. |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | ABS 500 x 400 x 1 mm (white) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Buy Perforated film 100 cm / 20 m |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 1 x | Styrene plate 320x120x1.0 mm |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 2 x | Extension 5 lipos JST/C |
| 2 x | Male connector for 12 pines AWG |
| 2 x | Hacker X-Pro USB interface V2 |
| 1 x | 12x8 tree blades propeller |
| 1 x | Propeller MASTER 7x5 |
| 1 x | Propeller MENZ-S 21x8 |
| 1 x | Propeller MENZ-S 15x8 3 blades |
| 1 x | Propeller MENZ-S 19x12 |
| 1 x | Propeller MENZ-S 19x8 3-Blades |
| 2 x | Angle of incidence meter |
| 1 x | PSC 6 |
| 2 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 2 x | Adjustable launching hook |
| 2 x | Bidule 111 3000 mm |
| 2 x | 18 mm wing servo holder |
| 2 x | 11 mm wing servo holder |
| 1 x | BIELA 19x7 WILGA Propellers |
| 1 x | Extension 6 lipos XH > EH |
| 1 x | Long Switch On/Off micro |
| 1 x | Female connector for 10 pines AWG |
| 1 x | Interruptor SPS 70v 60/120A |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | EWC3 40 cm wing connector |
| 1 x | Male connector for 20 pines AWG |
| 1 x | Interruptor RX/Batterie |
| 1 x | Male connector for 10 pines AWG |
| 1 x | EWC3 100 cm wing connector |
| 1 x | Electronic switch JETI SP6 0-15v/6A |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | Extension 2/3 lipos JST - JST/C |
| 1 x | FX three-position switched channel, long |
| 1 x | Female connector for 16 pines AWG |
| 1 x | Magnetic Interruptor MULTIPLEX |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | EWC6 40 cm wing connector |
| 1 x | Propeller MENZ-S 18x10 3-Blades |
| 1 x | Propeller MENZ-S 17x10 |
| 1 x | Propeller MASTER 6x4 |
| 1 x | Propeller MENZ-S 16x10 3-Blades |
| 1 x | Propeller POWER-PROP 15x8 |
| 1 x | Propeller MASTER 7x6 |
| 1 x | Propeller MASTER 5,5x4 |
| 1 x | Helice CLASSIC-Prop 20x10 |
| 1 x | Crimping tool |
| 2 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
| 1 x | 57 mm micro-mini servo cover |
| 1 x | Bidule 170 ARF 3.48 m |
| 2 x | 90x75 mm standart servo cover |
| 1 x | 16x10 BIELA propeller (3-blades) |
| 1 x | Propeller MENZ-S 18x8 3-Blades |
| 1 x | Propeller MENZ-S 20x10 |
| 1 x | JETImodel DPS 40 |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | Female connector for 6 pines AWG |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Electronic switch JETI SP06 Opto |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | Female connector for 20 pines AWG |
| 1 x | Propeller MENZ-S 20x12 3 blades |
| 1 x | Propeller MENZ-S 20x10 3 blades |
| 1 x | Propeller POWER-PROP 14x10 |
| 1 x | Propeller MENZ-S 21x8 3-Blades |
| 1 x | Propeller MASTER AIRSCREW 9x6 |
| 1 x | Propeller MENZ-S 15x10 |
| 1 x | Propeller MASTER 7x4 |
| 1 x | Propeller POWER-PROP 11x6 |
| 1 x | Propeller MASTER AIRSCREW 13x6 |
| 1 x | Propeller MASTER 6x3,5 |
| 1 x | 12x6 tree blades propeller |
| 1 x | 15x7 tree blades propeller |
| 1 x | Propeller MASTER 5,5x4,5 |
| 1 x | Propeller MENZ-S 17x6 |
| 1 x | Propeller MASTER AIRSCREW 12x8 |
| 1 x | Propeller MENZ-S 16x12 |
| 1 x | Propeller MENZ-S 18x10 |
| 1 x | Propeller MENZ-S 16x6 |
| 1 x | |
| 1 x | Avia spare blue cockpit (Top Model) |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
| 1 x | ARTIST 1.560 mm |
| 1 x | 65 mm mini servo cover |
| 2 x | Albatros ,spare fuselage (Top Model) |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 1 x | 50x45 mm micro-mini servo cover |
| 2 x | ACTIVE ARF Electric 1.995 mm |
| 2 x | BULLIT Wing 1095 mm |
| 1 x | ALBATROS 3.0 m (orange/white) |
| 1 x | 13 mm wing servo holder |
| 1 x | 58 mm micro servo cover |
| 2 x | Astra wing Joinner (Top Model) |
| 1 x | Bidule 55 V3 2460 mm |
| 1 x | Bidule 55 2460 mm Cabina |
| 1 x | 20 mm tail wheel for 0,5-1 Kg models |
 |
| 18,509.19EUR |
