| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 2 x | Covered closure or fairings |
| 1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
| 1 x | Propeller POWER-PROP 14x9 Izda |
| 1 x | Hot Glue Stick RED |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | Servo DL3017 Digi 17Kg-0.15s/60º |
| 1 x | Aluminium servo arm (2 uds) |
| 1 x | USB programador GO servos |
| 1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
| 1 x | SERVO S9177SV HV S-Bus2 Programable |
| 1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
| 1 x | Servo FUTABA BLS175 SV |
| 2 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
| 1 x | SAVOX SH 0254 servo |
| 1 x | SERVO DES 588 BB MG |
| 1 x | |
| 1 x | Motor holder for AC 28/7 |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
| 1 x | Cockpit plastic closing |
| 2 x | Cockpit metalic closing |
| 1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
| 1 x | Carbon plate 350x150x0.5 mm |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Catalog AERO-NAUT 2016 |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Carbon plate 350x150x2.5 mm |
| 1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
| 1 x | Remolcador "Jonny Hafenschlepper" |
| 1 x | Cockpit aluminium closing |
| 2 x | Chopped glass fibre strands 3 mm |
| 1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
| 1 x | Cockpit latch closing I=10 mm |
| 1 x | Cockpit aluminium closing 4.7g |
| 2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | Release film 100 cm x 50 m |
| 1 x | EVP Unit for AXI2208/xx and 2212/xx |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Avia spare fouselage CF reinforced (Top Model) |
| 1 x | Bidule 55 2460 mm Cabina |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 2 x | Avia (Top Model) |
| 1 x | Astra wing Joinner (Top Model) |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 2 x | Challenger ARF (Top Model) |
| 1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
| 1 x | BULLIT Wing 1095 mm |
| 1 x | Avia spare blue cockpit (Top Model) |
| 1 x | ACTIVE ARF Electric 1.995 mm |
| 1 x | Foil for sticking flaps and ailerons |
| 2 x | Electric spoiler 300 mm (2 pcs) |
| 1 x | Albatros ,spare cockpit (Top Model) |
| 1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
| 1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Glass fibre braided sleeve (45mm) roll 10m |
| 1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Glass fibre sleeve Ø 20 mm X 20m |
| 1 x | Autogyro Cierva C30 Spain |
| 1 x | Glases Innovation Plus |
| 1 x | Servo MKS HV6130 |
| 1 x | KIRA 480-34 5,2:1 |
| 1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
| 1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
| 1 x | Rudder 2_Tray 3~3.5 inch |
| 1 x | BULL MØ1 2.600mm ORANGE |
| 1 x | Servo Mount M (blue) |
| 1 x | Esc MasterBasic 70SB |
| 1 x | Red aluminium servo arm V3-Futaba 3,5inch |
| 1 x | PYRO 600-11 |
| 1 x | PYRO 750-50L Competition |
| 1 x | KIRA 500-36 6,7:1 |
| 1 x | KIRA 600-20 6,7:1 |
| 1 x | Servo MKS HV747 |
| 1 x | PYRO 700-56L |
| 1 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
| 1 x | Servo MKS 6100 DS |
| 1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
| 1 x | Servo MKS HBL550 |
| 1 x | KIRA 400-34 |
| 1 x | PYRO 900-52L |
| 1 x | KIRA 500-30 6,7:1 |
| 1 x | PYRO 800-40 Long Axi |
| 1 x | Servo MKS HBL599 SL |
| 1 x | KIRA 600-38 6,7:1 |
| 1 x | KIRA 480-38 5,2:1 |
| 1 x | KIRA 500-26 6,7:1 |
| 1 x | PYRO 700-45 Long Axi |
| 2 x | MAMBO 17 |
| 1 x | KIRA 480-38 |
| 1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
| 1 x | KIRA 480-43 5,2:1 |
| 1 x | PYRO 650-53L EJE LARGO |
| 1 x | HV6150 Digital Servo |
| 1 x | Servo Metal Horn 15.5 mm MKS |
| 1 x | PYRO 750-50L |
| 1 x | Servo MKS 6100 DS |
| 1 x | Servo MKS HV69 |
| 1 x | PYRO 800-48 Long Axi |
| 1 x | KIRA 600-20 |
| 1 x | KIRA 600-17 |
| 1 x | Servo MKS HV1220 |
| 1 x | KIRA 480-26 5,2:1 |
| 1 x | Servo MKS HV6120H |
| 1 x | 25 mm carbon servo arm |
| 1 x | Servos wing assembly set HS 80/81/82/85 |
| 1 x | Servo JETI DSHV 3D13T (13 Kg) |
| 1 x | Micro Crystal RX 35.160 Ch 76 |
| 1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
| 1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
| 1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
| 1 x | aluminium servo arm V1-JR 1,0 inch M2 |
| 1 x | Carbon blade 3D 230 mm |
| 1 x | BULL MØ1 2.600mm "AeroPANDA" |
| 1 x | Micro Crystal RX 35.170 Ch 77 |
| 1 x | Esc X-75-OPTO-Pro |
| 1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
| 1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
| 1 x | Shaft sleeve LAMA |
| 1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
| 1 x | |
| 1 x | Radial heatsink for MPJ AC25/35-xx motor |
| 1 x | Brushless ESC 30A F-450 |
| 1 x | BULL MØ1 2.600mm "McLAREN-GULF" |
| 1 x | Rudder 2_Tray 4.5~5 inch |
| 1 x | PC-21 2.880 mm WHITE/RED |
| 1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
| 1 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
| 1 x | JetiBOX |
| 1 x | Program 5v SIO RS 232 |
| 1 x | Kontronik ProgUnit |
| 1 x | Servo NARO Max Std |
| 1 x | PROFI Box JETI |
| 1 x | Indoor Brushed motor kit |
| 1 x | MB339 Freece PNP 1790 mm |
| 1 x | SCHOCKJET ARF 2.050 mm |
| 1 x | PC-21 2.880 mm RAAF Sheme |
| 1 x | FELIX SportJet Yellow 2200 mm |
| 1 x | JP Hobby ER-120 Tricycle FELIX JR |
| 1 x | PC-21 2880 mm Propeller 5 blade 20x10 K45TP Scale composite |
| 1 x | ESC XREG 60 Amp 2-6 LiPo BEC 5V/3A |
| 1 x | MB339 CANADA PNP 1790 mm |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
| 1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
| 1 x | Servo HITEC HS-5585MH |
| 1 x | Servo HITEC HS-55 |
| 1 x | Servo case HS-225MG/225BB/5245MG |
| 2 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
| 1 x | Bidule 111 3000 mm Canopy |
| 1 x | Servo TOPMODEL STANDARD S3217 |
| 1 x | Set of buckles and strap, 1:4 scale. |
| 1 x | Swift S1 De-luxe 3.730 mm |
| 1 x | Ventus 2cx 4.5 m Bag canopy |
| 1 x | Ventus 2cx 4.5 m Winglets |
| 1 x | Sliding window 1:2,4 / 1.2,6 Scale |
| 1 x | Servo TOPMODEL DS9010 T |
| 1 x | 90x75 mm standart servo cover |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
| 1 x | Servo HITEC HS-5475 HB Digi |
| 1 x | Support Pitot JETI |
| 1 x | Carbon plate 550x350x2.5 mm ECOTECH |
| 1 x | Servo HITEC HS-225 BB |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
| 1 x | VPP system propeller for AXI VPP motors (spare) |
| 1 x | Propeller 9x7 SlowFlyer |
| 1 x | Servo TOPMODEL DS1413 T |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 2 x | Spare screw M3 6pcs. |
| 1 x | Electric spoiler 440 mm (2 pcs) |
| 1 x | Albatros ,spare fuselage (Top Model) |
| 1 x | Prelude ARF 2500 mm (TopModel) |
| 1 x | ALBATROS 3.0 m (orange/white) |
| 1 x | Fixed launching hook |
| 1 x | NoNa BB wheel Ø175x55mm in pair |
| 1 x | 50x45 mm micro-mini servo cover |
| 1 x | 7 mm gas motor standoff |
| 1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 1 x | NoNa BB wheel Ø200x60mm in pair |
| 1 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
| 1 x | MPX Support |
| 1 x | 57 mm micro-mini servo cover |
| 1 x | SWEET Electro ARF "CFR fuselage " (Top Model) |
| 1 x | Siesta T tail (Topmodel) |
| 1 x | COMFORT MOUNT ø 55 mm |
 |
| 45,160.95EUR |
