| 1 x | Extension silicon 30 cm male (Futaba) |
| 1 x | Extension 15 cm (Futaba) |
| 1 x | Hobbylite Filler, Balsa colour |
| 2 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
| 1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
| 1 x | Spray Graphit 33 |
| 1 x | Cable S.BUS 3 salidas 300 mm |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | 1000 ml sealer (DOPE) |
| 1 x | 20 g tin paste |
| 1 x | Premium servo extension 75cm |
| 1 x | Extension silicon 10 cm (Graupner) |
| 1 x | Extension silicon 35 cm male (Futaba) |
| 1 x | Circlick securite |
| 1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
| 3 x | |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 1 x | Futaba male 40 cm extension |
| 1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 1 x | Extension 7.5 cm |
| 1 x | Universal Colour Paste deep black 50 g |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
| 1 x | Prolongador S-Bus JR/JR 20cm |
| 1 x | Extension 100 cm (Futaba) |
| 2 x | Extension silicon 10 cm (Futaba) |
| 1 x | Paint gun for sprays |
| 1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
| 2 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 1 x | Extension PVC 150 cm (Graupner) |
| 1 x | Premium servo extension 50cm |
| 2 x | 200 mm extensión servo HITEC/JR |
| 1 x | Extension 90 cm (Futaba) |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Extension silicon 30 cm male (Graupner) |
| 1 x | Spray EC Red 400ml |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | Extension silicon 100 cm (Graupner) |
| 1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Covered closure or fairings |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Canopy Latch |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Stickers-digit for marking |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Digital scale up to 40 kg |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Z Bender - S Type Tool |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | Vacuum pump P1-N |
| 1 x | Ball Link Plier |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Crimping tool |
| 1 x | Xplorer3 anemometro |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | Copier 2x20 cm pcs |
| 1 x | Dust collector for mould cleaning |
| 1 x | Long pinned hinge (12 uds) |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | 25 mm reinforced hinge |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
| 2 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Gates hinge |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 2 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 2 x | 18 mm reinforced hinge |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 3 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Sanyo RX Battery Eneloop RX 4,8 V Futaba |
| 1 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
| 2 x | Sanyo RX Battery Eneloop 6,0 V JR |
| 2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 2 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 2 x | Sanyo TX Battery Eneloop 7,2 V MPX |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Sanyo TX Battery Eneloop 9,6 V 2500 mAh |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 3 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Sanyo RX Battery Eneloop 6,0 V JR |
| 1 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Long pinned hinge (6 uds) |
| 3 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Oracover Black 10 m |
| 1 x | Smoke set "M" |
| 1 x | PIX Hawk with accesories |
| 2 x | Retract undercarriage |
| 1 x | Landing gear strap medium (4 uds) |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Nylon gear block Ø 3 mm (2 uds) |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Extension silicon 75 cm (Graupner) |
| 1 x | 160 mm carbon undercarriage (2pcs) |
| 1 x | Bearing block for noseleg landing gear |
| 1 x | Tailwheel for 20/60 size |
| 1 x | Legs + electric brakes for Viper Jet 1700 mm |
| 1 x | Tail wheel for 8-12 kg models |
| 1 x | Propeller POWER-PROP 7x7 |
| 1 x | Wing bolts M3 Steel screw Red (2 pcs) |
| 1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
| 1 x | Wing bolts M3 Steel screw blue (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
| 1 x | Triple rod con. 3mm Pushrod (2 pcs) |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | USB Mini Camera endoscope |
| 1 x | 22 mm Cut Disc Proxxon/Dremmel |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | Fresa corte diamante Ø 2.35mm (lentil) |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
| 1 x | Steel brush wheel with 2.35mm |
| 1 x | Tachometer Hyperion Multi-pala |
| 1 x | Dremel PERMAGRIT thin lime |
| 1 x | Sealing Iron Profi LCD |
| 1 x | Sealing Iron Sleeve PROF |
| 1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
| 1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
| 1 x | Hardener Aero EPH 161 (500 g) |
| 1 x | resin-hardener L-385 H-385 (5000 g) |
| 1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
| 1 x | Mould Resin P 10 kg |
| 1 x | Epoxy Resin L (2.5 Kg) |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Sub-D Plug Mold |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Digital weight, angle and balance meter BASIC |
| 1 x | Tube bender |
| 1 x | Smart Soldering Iron 110W/230V AC |
| 1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
| 1 x | Dean-T Plug Mold |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Boxed KIT OF 7 Rotary Burrs FINE |
| 1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
| 3 x | Pin hinge 34x16 mm (10 uds) |
| 1 x | Medium pin type hinge (12 uds) |
| 1 x | Carbon plate 550x350x3.0 mm ECOTECH |
| 1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Fiberglass plate 350x150x2.5 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
| 1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
| 1 x | 15 mm reinforced hinge |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
| 1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
| 1 x | Battery LiPo GRE18 600 mAh 7.4v |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
| 1 x | Pin hinge 39x20 mm (10 uds) |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | Retract undercarriage for gliders up to 2 Kg |
| 2 x | Retract undercarriage for gliders up to 3,5 Kg |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Racor 4/6 mm |
| 1 x | Nylon threaded block M5 (2 uds) |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 1 x | Quick hose connector 4-4 mm |
| 1 x | Tap FESTO 4-4 mm |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
| 1 x | Engine mounts for .09 - .19 engine |
| 1 x | Ciano KAVAN Thick 20g |
| 1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
| 1 x | Spinner 40 mm Black (Kavan) |
| 1 x | KAVAN Hand crank fuel pump |
| 1 x | |
| 1 x | Glow Plug Clip 1.3 Ah |
| 1 x | 10 mm aluminium spinner (Kavan) |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
| 1 x | SKY RC T400Q Charger 4x100w |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Adaptadores carga 6s JST-XH |
| 1 x | Ciano KAVAN Super Thin 20g |
| 1 x | Conector MR-60 (pareja) |
| 1 x | Electric Fuel Pump 12v |
| 1 x | XT60 Connector with Holder Male 2pcs |
| 1 x | Pin hinge 26x11 mm (10 uds) |
 |
| 10,596.88EUR |
