| 1 x | BEC 3A FOXY |
| 1 x | 4 LiPo XH>EH adapter |
| 2 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | USB HLS prog. interface |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 2 x | CM-3 |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 5 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | CC 03 |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Circlick securite |
| 1 x | TrainerCord (master-learner) |
| 2 x | 2 LiPo XH>EH adapter |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | 30 cm BEC cable (female) |
| 1 x | CC 02 |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 2 x | Bungee HLG Premium |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 2 x | Flat washer 2.7 mm (20 uds)pcs) |
| 1 x | Quicklock washer 1.5 mm (10 pcs) |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Quicklock washer 4 mm (10 pcs) |
| 1 x | Circlik for shaft 1.5 mm (10 pcs) |
| 1 x | Quicklock washer 3.5 mm (10 pcs) |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 2 x | Circlik for shaft 1.9 mm (10 pcs) |
| 1 x | Quicklock washer 3 mm (10 pcs) |
| 1 x | Flat washer 3.2 mm (20 pcs) |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | Lock washer 3.2 mm (20 pcs) |
| 1 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | 3 mm Long Prop Adapter M5 |
| 1 x | Adapter 4,0 mm M6 |
| 1 x | Adapter 3,2 mm M8 |
| 1 x | Adapter 3,0 mm M6 |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Threaded coupler M2 (10 uds) |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
| 1 x | 3 mm Short Prop Adapter M5 |
| 1 x | Adapter 3,2 mm M6 |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Adapter 4,0 mm M8 |
| 1 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 2 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | PPM Encoder Module |
| 2 x | Digital Air Speed Sensor And Pitot Tube Set |
| 2 x | Tube Pitot to PIXHAWK |
| 1 x | Horn 5/10 with M2 Bearing |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | Cable S.BUS 3 salidas 300 mm |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Opto Gas Engine Kill Switch |
| 2 x | PWC4 wing/fuselage connector for 4 servos |
| 2 x | MPS Gas-Cap-Powerswitch |
| 1 x | SPS 70V 100/200 A |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Short Switch On/Off micro |
| 1 x | Interruptor RX/Batterie |
| 2 x | MAX BEC 2D plus EX |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | Support Pitot JETI |
| 1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
| 2 x | Hardener Aero EPH 161 (500 g) |
| 1 x | Epoxy 5 min. 200g |
| 1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
| 1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
| 1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
| 1 x | |
| 1 x | Epoxy Resin L (2.5 Kg) |
| 1 x | resin-hardener package L-385 with hardener H-385 |
| 1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
| 1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
| 1 x | Epoxy L 40 min. 10 kg (Resin) |
| 1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
| 1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
| 1 x | Vasa model Catapult |
| 1 x | Foaming agent for epoxy resins 200 g |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | PowerBox PIONEER incl. microSwitch |
| 1 x | OPTOTRONIX Aurora LCU |
| 1 x | DPSI RV Mini 6 Magic |
| 1 x | DPSI Micro - RCS |
| 1 x | M3 black washers (4 pcs) |
| 1 x | Flat washer 4.3 mm (20 pcs) |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | L-shaped servo mount |
| 1 x | Servo arm with 6 mm hole to FEMA 9800A |
| 1 x | Metal gear set for HS85MG/5085MG |
| 1 x | Servos security connector (2 pcs) |
| 1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
| 1 x | Propeller POWER-PROP 13x9 |
| 1 x | Propeller APC 14x8.5 Electric Pusher |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | Socket head long ball link M3 (6 uds) |
| 1 x | PS-050 TONEGAWA Servo |
| 1 x | SSPS105 Super Hi-Power servo |
| 1 x | Servo arms set HS-65HB/MG/5065MG |
| 1 x | 10-15mm Servo Arm HITEC |
| 1 x | Gear for MICRO BB |
| 1 x | Servo DITEX EL0510M |
| 1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
| 1 x | MIG 29 3D RTF, Servo |
| 1 x | Servo Robbe FS 128 BB MG HV Digital |
| 1 x | Pinion 11 - 3,2 mm |
| 1 x | Lock nut M6 (10 pcs) |
| 1 x | Tapping Screw M2.2x13 (10 pcs) |
| 1 x | Lock washer 4.3 mm (20 pcs) |
| 1 x | Micro Tarjeta SD Rapid Rush 16 GB |
| 1 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Spring lock washer 2.6 mm (20 pcs) |
| 1 x | Nut for mounting M6 (4 pcs) |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
| 1 x | PowerBox iGyro 1e |
| 1 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
| 1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
| 1 x | Spinner negro 40 mm |
| 1 x | PowerBox MagSensor red connector |
| 1 x | DPS Switch JR/JR |
| 1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
| 1 x | PowerBox Champion SRS |
| 1 x | DPSI RV Mini 5 Magic |
| 1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
| 1 x | BlueCom™ Adapter (Android / WP) |
| 1 x | DPSI magnetic switch actuator (PCB) |
| 1 x | Gyro 3-Ejes REFLEX V2 FMS |
| 1 x | Spinner black 30 mm |
| 1 x | Propeller 12x6 Falcon electric |
| 1 x | DUPLEX 2.4EX Expander E4 |
| 1 x | Battery RX JETI LiIon RB 6200 7.2v |
| 1 x | Caps multicolor Switch JETI |
| 1 x | USB interface ALTIS |
| 1 x | Switching module high voltage SXH |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 1 x | wing/fuselage connector for 16 pines AWG 20-24 |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 1 x | Battery RX JETI LiIon RB 2600 7.2v |
| 1 x | DUPLEX 2,4GHz MRPM EX |
| 1 x | Black tray 2,4EX DC-16/14/24 black |
| 1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
| 1 x | Round flex hinge (12 uds) |
| 1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
| 1 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
| 1 x | Battery RX JETI LiIon RB 3100 7.2v |
| 1 x | White gelcoat 1 Kg |
| 1 x | Mould Resin P 10 kg |
 |
| 6,969.58EUR |
