| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | One touch canopy lock |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Covered closure or fairings |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | Servo NARO Max Std |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | Red smoke canister 65 g |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Fan for A60 |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Angle support XT60 conector |
| 1 x | Support pumb/filter Xicoy X45 |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Recessed MPX connector support (6 pcs) |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Para-RC Mix |
| 1 x | Paramotor BackPack XXS 2 |
| 1 x | Dual Sequencer Gear and Canopy |
| 2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Festo Adaptor Tygon Large/4mm |
| 1 x | Metal ring front FEMA |
| 2 x | Landing gear axle Ø 4 mm (2 uds) |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Cable set Premium™ MAXI "one4two" |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | 100m servo "Premium" wire (white/red/blue) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Blue silicone 0,5 qmm wire (50 m) |
| 1 x | 200m servo "Premium" wire (white/red/blue) |
| 1 x | LUCAS pilot ARTF |
| 1 x | Paramotor Trike XL |
| 1 x | Ballast 700gr OPALE |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 2 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
| 1 x | Faucet FESTO |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
| 1 x | Nylon gear block Ø 3 mm (2 uds) |
| 1 x | Retract undercarriage for gliders up to 2 Kg |
| 1 x | Indoor landing gear set |
| 1 x | 28 mm tailwheel unit |
| 1 x | Clip fixing for wing (2 pcs) |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 2 x | Protective Cover for wires Ø 10 mm 1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 3 x | Cable set PREMIUM , fuselage/wing one4one |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | Cable Cargador FUTABA |
| 1 x | Scale exhaust K100TP |
| 1 x | Burner Plug K30/ K45 |
| 1 x | Turbina KINGTECH K320 G5 |
| 1 x | Scale exhaust K45TP |
| 1 x | KingTech K100TP G4+ Turboprop |
| 1 x | KingTech Turbineoil 5L |
| 1 x | Actuator Electric 25 mm HIGH TORQUE |
| 1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
| 1 x | 1 m servo "Premium" wire (white/red/blue) |
| 1 x | Battery EMCOTEC LiIon 3000 7.2v |
| 1 x | Kit hydraulic brake |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | Piston ring for ZG 20 and G240RC |
| 1 x | Piston ring for DA-50R and DA-100 |
| 1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
| 1 x | Cylinder for ZG20 |
| 1 x | Protective Cover for wires Ø 20 mm 1000 mm |
| 1 x | 10m servo "Premium" wire (white/red/blue) |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
| 1 x | Extension MPX-MPX 20 cm |
| 1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
| 1 x | 10 mm Quick clamp_L (6 pcs) |
| 1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
| 1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
| 1 x | Battery RX JETI LiIon RB 3100 7.2v |
| 1 x | Battery RX JETI LiIon RB 6200 7.2v |
| 1 x | Battery RX JETI LiIon RB 2600 7.2v |
| 1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
| 1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
| 1 x | PowerPack 2.5X2 PRO |
| 1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 1 x | Wheel cover holder Ø 6 mm (2 uds) |
| 1 x | 460 mm EPP Floats |
| 1 x | T-Hose connector 2-2-2 mm |
| 1 x | T-Hose connector 6-6-6 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 2 x | Silicone red 0,5 qmm wire ( 1 m) |
| 2 x | Silicone red 0,75 qmm wire ( 1 m) |
| 2 x | Silicon black 2,5 qmm cable ( 25 m) |
| 1 x | Silicone black 2,5 qmm wire ( 1 m) |
| 1 x | Spinner 3BL propeller pleg. 36 mm / 5,0 mm |
| 1 x | Spare spinner 36 mm 3-Bl |
| 1 x | Central piece 42 mm 0º [12 mm] |
| 1 x | entral piece 3Bl 42 mm 0º |
| 1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
| 1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
| 1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Tufnol Choke Lever Arm d=4,7mm |
| 1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
 |
| 14,924.23EUR |
