| 4 x | Vasa model Catapult |
| 1 x | Bungee HLG Premium |
| 3 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 3 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 4 x | Starter Sullivan-STAR 601 |
| 1 x | Cut tube |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Ball Link Plier |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 2 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 2 x | 3,0x60 mm allen screwdriver |
| 2 x | |
| 2 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Copier 2x20 cm pcs |
| 1 x | 2,5x60 mm allen screwdriver |
| 2 x | Digital scale up to 40 kg |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Dust collector for mould cleaning |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 2 x | BALSA triangular 6x6x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Tape GFK 25 mm |
| 1 x | Horn 6/35 with M3 Bearing |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Support pump Xicoy X45 |
| 1 x | Kwik link unmount tool |
| 2 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
| 3 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 2 x | Sealing Iron Sleeve STD |
| 2 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
| 1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
| 1 x | Sealing Iron Profi LCD |
| 1 x | Rubber Insert soft, 1 Pcs. |
| 1 x | Sealing Iron Sleeve PROF |
| 1 x | Z Bender - S Type Tool |
| 2 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
| 1 x | Fresa corte diamante Ø 2.7mm (bola) |
| 2 x | Tube bender |
| 1 x | Sandpaper file 13 mm |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 3 x | Z Bender - S Type Tool |
| 1 x | Smart Soldering Iron 110W/230V AC |
| 1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
| 1 x | DA 85 / DA 100 / DA 100 L carburetor |
| 1 x | Deposito combustible tipo "turbina" 330 ml |
| 1 x | 7.94 x 4.76 mm tygon tube 1 m |
| 1 x | O-ring Saito FG-73 5cyl |
| 1 x | 500 ccm gasoline fuel tank |
| 1 x | Propadapter for motor A50-V3 |
| 1 x | EME 55 cc carburetor WALBRO |
| 1 x | Electron 22 mm Fitting barb |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 2 x | BALSA trip 5.0x5.0x1000 mm |
| 2 x | A/C quality beech plywood 600x300x6.0 mm |
| 2 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 2 x | Balsa panel 3.0x100x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Balsa panel 10x100x1000 mm |
| 2 x | BALSA triangular 8x8x1000 mm |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 2 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Support XT60 conector (2 pcs) |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | Support Filtro FESTO |
| 1 x | Support Antena 2.4 Ghz (2 pcs) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Cyano SUPER - GOLD™ (12g) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | Piston ring EME 35cc |
| 1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
| 1 x | Motor UMS Radial-5-150cc gas |
| 1 x | 3,9 mm ZG20-ZG38 servo arm |
| 2 x | Piñon motor autostarter 60cc |
| 2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
| 2 x | Motor EME 35 cc |
| 2 x | CDI EME 120cc |
| 2 x | One Way bearing for EME55 starkit with key |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Cyanocrylate MD GA460 odourless 20g |
| 1 x | Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Handle for PERMAGRIT lime |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Catalyst INSTA - SET™ (60g) |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
| 1 x | Thread locker IC-Loc™ red "high" 10 ml |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 2 x | Ciano KAVAN Thin 20g |
| 3 x | Ciano KAVAN Thick 20g |
| 2 x | Ciano KAVAN Super Thin 20g |
| 1 x | Debonder CA 20g |
| 2 x | KAVAN Threadlocker - Blue 10ml |
| 1 x | Pick up DA50/100/150 |
| 2 x | Cylinder for ZG20 |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Pick up EME 55/60 cc |
| 1 x | Propeller hub EME 60cc |
| 1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
| 3 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | One Way bearing for EME35 starkit with key |
| 2 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 2 x | Propeller pad and output shaft EME 55/60 cc |
| 3 x | Motor EME 60 cc |
| 2 x | Piñon motor autostarter 35cc |
| 1 x | Reed valve for DA 50-R |
| 1 x | Motor EME 60 cc with electric starter |
| 1 x | Motor UMS Radial-5-125cc gas |
| 1 x | Pitts Mufflers EME 70 cc (2 pcs) |
| 2 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Motor EME 70 cc with autostarter |
| 1 x | Piston ring for DA-60 and DA-120 |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Tufnol Choke Lever Arm d=4,7mm |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Motor UMS Radial-7-50cc gas |
| 2 x | CDI EME 55/60 cc |
| 1 x | Spark Plug BRISK M14x1.25 |
| 1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
| 2 x | Carburetor for ZG45SL and ZG62/S/SL |
| 1 x | CA Glue (medium) 20g |
| 1 x | Rear bearing for motor 35/40 cc |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Piston ring for DA-150 |
| 1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
| 1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair |
| 1 x | Junta humo metalica G30 (DLE30/DLE60) |
| 1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
| 1 x | Mold plugs XT-30 |
| 1 x | Propeller drill jig DA-35/50/60/70 |
| 1 x | Tool for entel |
| 1 x | GLOW 9C + accesories |
| 1 x | Hot Glue Stick RED |
| 1 x | Laminating brush 10 mm, pack/ 50 pcs |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Crimping tool |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Yellow smoke canister 65 g |
| 1 x | Blue smoke canister 140 g |
| 1 x | Propeller POWER-PROP 7x7 |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | Tail support (2 pcs) |
| 1 x | Screws flush mount M2 |
| 1 x | Support FUEL DOT V3 |
| 1 x | Head upper part |
| 1 x | Blades 330mm |
| 1 x | GM Propellers Folding propeller Scale 20x13 Carbon 1 pair |
| 1 x | TWIST planeador gomas |
| 1 x | Spring clamp for tube Ø29 mm ext 1pc |
| 1 x | Junta humo metalica G85 (DLE85/DLE170) |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 2 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 2 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 2 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | 290x4 mm M4 shaft ship |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Blue smoke canister 100 g |
| 1 x | White smoke canister 65 g |
| 1 x | Screw M3x16 |
| 1 x | Rudder |
| 1 x | Bearing housing |
| 1 x | Nut M2 |
| 1 x | Head spacer |
| 1 x | Ball joint long |
| 1 x | Side rudder |
| 1 x | Servo Fork |
| 1 x | Nut M1,6 |
| 1 x | Blade holder lower |
| 1 x | Motor wall |
| 1 x | Rotorshape Elevator |
| 1 x | Blade holder upper |
| 1 x | Raer wall |
| 1 x | Side Plate |
| 1 x | Bearing 3x6x2,5 |
| 1 x | Head runner |
| 1 x | Battery plate |
| 1 x | Balls 4 mm |
| 1 x | Wheel keeper washer |
| 1 x | Head core |
| 1 x | Blade holder center GFK 0,5 mm |
| 1 x | Universal Filter |
| 2 x | KAVAN CA Activator 150ml |
| 2 x | Motor EME 70 cc |
| 1 x | Muffler for Titan ZG 26SC/EI |
| 1 x | Piston for ZG22 / ZG23 / G2D70 |
| 1 x | Silencer for ZG22, ZG23, ZG231SLH, G2D96-D |
| 1 x | Piston EME 35cc |
| 1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
| 1 x | Cylinder EME 35 cc |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
| 1 x | Release wax 250ml |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
| 1 x | Epoxy L 40 min. 10 kg (Resin) |
| 1 x | Piston for ZG 26SC/26SCM/SLH ZG 26EI and Zenoah G260RC/G270RC |
| 1 x | Piston for ZG 20 |
| 1 x | MEKP Harderner 100 g |
| 1 x | CA Glue fast 20g |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Spring Clip 28 mm teflon tube |
| 1 x | 3-blades 28x12 carbon prop Super Silence |
| 1 x | Pitts Mufflers EME 55/60 cc |
| 1 x | Gasket intake manifold - cylinder for ZG 74B/ZG 80G |
| 1 x | Stainless steel silencer for Titan ZG38/S/SC |
| 1 x | EME ignition free wheel |
| 1 x | Tool for entel |
| 1 x | Motor EME 35 cc with electric starter |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 2 x | Ciano KAVAN Medium 20g |
| 1 x | Extension silicon 10 cm (Graupner) |
| 1 x | Microbalon filler for CA glues. Packaging bottle 20g |
| 1 x | 3-blades 20x12 carbon prop Super Silence |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Collector screw DA |
 |
| 23,937.04EUR |
