| 2 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 2 x | Horn 6/35 with M3 Bearing |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 2 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | LH long aluminium horn L31xH30 (2pcs) |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 2 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 2 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | Small aluminium horn gold (2pcs) |
| 2 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 2 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | Horn with ball 40x30 |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 2 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Circlick securite |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 2 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 2 x | Carbon fiber rod 14 mmx1000 mm |
| 1 x | Jeti Black cap |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Stickers-digit for marking |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | eFuel 30A Power Supply |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Protective Cover for wires Ø 20 mm 1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | PowerBox Smokepump |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
| 1 x | JM electric Pump |
| 2 x | Suction funnel for carburetor 90D-L (red) |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
| 1 x | Sparkplug 1/4-32 |
| 2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | DA 85 / DA 100 / DA 100 L carburetor |
| 1 x | Bujia OS G5 gasolina |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 2 x | TA1200 Charger Compatible with Smart and Standard LiPo Batteries |
| 1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
| 1 x | EME 55 cc carburetor WALBRO |
| 2 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | Sparkplug 1/4-32 Glow |
| 2 x | Extension Arm for Carburetor (red) |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm) |
| 1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Gasket electric Fuel Pump |
| 1 x | PowerFuel RX V2 Fuel Pump |
| 1 x | Horn DU-BRO 1/2 (2 pcs) |
| 1 x | Horn mando small (2 pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Propadapter for motor A50 |
| 2 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Servo mounting frame SV-1260MG |
| 1 x | Servo SAVOX SW-1250 MG digi |
| 2 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
| 1 x | Extra-long adjustable aluminium control horn 2,8x34 |
| 1 x | Horn mando long (2 pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Female connector for 16 pines AWG |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | EWC3 40 cm wing connector |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Female connector for 20 pines AWG |
| 1 x | Extension 6 lipos XH > EH |
| 1 x | Male connector for 20 pines AWG |
| 1 x | Male connector for 6 pines AWG |
| 1 x | Extension 5 lipos JST/C - JST |
| 1 x | FX three-position switched channel, long |
| 1 x | Lense for Spotlights, 20mm |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | Hovercraft sailcloth |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | 25 mm reinforced hinge |
| 1 x | Reflector 18 mm (2 pcs) |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Carbon fiber rod 0.8 mmx1000 mm |
| 1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
| 1 x | Servo AN-20 MGBBA |
| 1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
| 1 x | ALU servo arm 3 mm shaft |
| 1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
| 1 x | SAVOX SH 0254 servo |
| 1 x | Servo SAVOX SV-0236 MG HV |
| 1 x | Servo HITEC HS-125 MG |
| 1 x | Servo lock HS-80/81/82/85 (2 pcs) |
| 1 x | Servoarm Aluminium SH-82 |
| 1 x | Xoar Electric Beechwood Prop 16x7 |
| 1 x | Propeller APC 10x4.7 SF Pusher |
| 1 x | Xoar Electric Beechwood Prop 22x10 |
| 1 x | Xoar Electric Beechwood Prop 21x10 |
| 1 x | Xoar Electric Beechwood Prop 15x8 |
| 1 x | Xoar Electric Beechwood Prop 24x8 |
| 1 x | Xoar Electric Beechwood Prop 20x10 |
| 1 x | Propeller APC 11x8.5 Electric |
| 1 x | Propeller APC 12x6 Electric Pusher |
| 1 x | Propeller APC 11x7 SF |
| 1 x | Propeller APC 12x3.8 SF |
| 1 x | Propeller APC 12x10 Electric |
| 1 x | Propeller APC 11x4.5 Electric Pusher |
| 1 x | Propeller APC 14x10 Electric |
| 1 x | Propeller APC 12x6 SF |
| 1 x | Propeller APC 10x5 Electric |
| 1 x | DLE 55 carburetor |
| 1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
| 1 x | Tren de cola carbono 50-70cc |
| 1 x | Tailwheel for 20/60 size |
| 1 x | Tailwheel for 40/90 size |
| 1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
| 1 x | EXTRA 300 78" V3 Yellow/Red/Blue |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | Smoke pump RCEXL |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
| 1 x | 2,3 mm Prop Adapter M5 |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Small adjustable control horn with bearing |
| 1 x | SAVOX SH 1250 MG servo digi |
| 1 x | SAVOX SH 1290 MG servo digi |
| 1 x | Servo SAVOX SA-1256 TG |
| 1 x | EXTRA NG 85" 2159mm red/white |
| 1 x | Variable Flow Smoke Pump System |
| 1 x | Charger GensAce IMARS Dual Channel AC200W/DC300Wx2 |
| 1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
| 1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
| 1 x | 4 mm Prop Adapter M6 |
| 1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
| 1 x | 12 mm dogdrive props |
| 1 x | 2 mm Prop Adapter M5 |
| 1 x | Actro 32-3 Heli MAX 5mm |
| 1 x | Medium extra-strong control horn with bearing 2,8x24 |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | Rudder forward 80x28 "type Kato" |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Reed valve for DA-60/70 |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | Horn F3A de Titanium 16 mm (2 units) |
| 1 x | Horn for flap control (1 pcs) |
| 1 x | Small control horn with bearing (2 pcs) |
| 1 x | Piston ring for ZG 20 and G240RC |
| 1 x | Horns indoor |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | ABS I Strip 20x10x1000 mm |
 |
| 9,443.07EUR |
