| 2 x | PS-050 TONEGAWA Servo |
| 2 x | SSPS105 Super Hi-Power servo |
| 2 x | SUS wire 3m (nylon coated) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 2 x | 50x45 mm micro-mini servo cover |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 2 x | 90x75 mm standart servo cover |
| 1 x | 13 mm wing servo holder |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | 90x60 mm standart servo cover |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Servo TOPMODEL S7520 MG |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | One touch canopy lock |
| 2 x | 65 mm mini servo cover |
| 1 x | 58 mm micro servo cover |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | 57 mm micro-mini servo cover |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Servo TOPMODEL DS9010 T |
| 1 x | Cockpit plastic closing |
| 1 x | Covered closure or fairings |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
| 1 x | Servo inverter |
| 1 x | HITEC DPC-11 programmer |
| 2 x | Servo HITEC HS-45 HB, servo box |
| 2 x | Servo lock HS-80/81/82/85 (2 pcs) |
| 1 x | Servo Digital HITEC HS-5065 MG |
| 2 x | Servo HITEC HS-5085 MG Digi |
| 1 x | Servo HS-5070 MH Hi Volt |
| 1 x | Servo HITEC HS-311 |
| 1 x | Servo HITEC HS-5087 MH |
| 1 x | Servo HITEC D941 TW |
| 1 x | Servo HITEC D-955 TW Titanium |
| 2 x | Servo HITEC D954 TW |
| 2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 3 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | HITEC 20 mm servo arm with ball link |
| 1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
| 1 x | Dremel 3000 130W |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
| 1 x | 3,2x1000 mm 2:1 red termoretract tube |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Servo BLUE Bird BLS-H71B v2 |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Servo BMS-4112 |
| 2 x | Servo TOPMODEL STANDARD S3217 |
| 1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Servo Tester |
| 1 x | Set Micro-horns HS-60/81/85 |
| 1 x | Servo HITEC HS-7954 SH Digital High |
| 1 x | Servo HITEC HS-65 MG |
| 1 x | Servo HITEC HS-7115 TH |
| 1 x | Servo HITEC HS-75BB Retract |
| 1 x | Servo HITEC HS-55 |
| 2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | 18 mm wing servo holder |
| 1 x | Servo HITEC HS-7245MH |
| 1 x | Canopy Latch |
| 2 x | DYNAMOMETER S-1580 |
| 1 x | Servo SAVOX SV-1260 MG |
| 1 x | Savox Brushless Servo SC-1251 MG |
| 1 x | SAVOX SH 0255 MG servo |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | 140 mm rods set for direction control |
| 1 x | 1000 ccm complete gasoline fuel tank |
| 1 x | 20cm Flexible Stainless Steel Exhaust Tubing D=25mm |
| 1 x | BOEING 727, Jet pipe for Boeing 727 |
| 1 x | BOEING 727, Retract set for Boeing 727 |
| 1 x | Wing Joiner ULTIMATUM 2.0 m |
| 1 x | Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | 24x14 prop Super Silence |
| 1 x | |
| 1 x | 3,9 mm ZG20-ZG38 servo arm |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | 80 mm rods set for direction control |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | 100g Flux Paste for Silver Solder |
| 1 x | 3-blades 16x10 carbon prop Super Silence |
| 1 x | 55% silver electrodes (2 pcs) |
| 2 x | 3-blades 30x12 carbon prop Super Silence |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 2 x | 28x12 prop Super Silence |
| 1 x | 10cm Flexible Stainless Steel Exhaust Tubing D=25mm |
| 1 x | 500 ccm complete gasoline fuel tank |
| 1 x | Allen wheel collar M4x4 |
| 2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | 3-blades 24x12 carbon prop Super Silence |
| 1 x | 3-blades 20x10 carbon prop Super Silence |
| 1 x | 30x14 prop Super Silence |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | 27x10 prop Super Silence |
| 1 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
| 1 x | 45 mm rods + T patellas set for direction control |
| 2 x | 100 mm rods set for direction control |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 22x10 prop Super Silence |
| 1 x | 29x12 prop Super Silence |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=25mm |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | 3-blades 29x12 carbon prop Super Silence |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Allen wheel collar M3x5 |
| 1 x | 15 cm PTFE-tubing for 25 mm tubes |
| 2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow |
| 1 x | 3-blades 21x12carbon prop Super Silence |
| 1 x | 3-blades 28x12 carbon prop Super Silence |
| 1 x | 24x12 prop Super Silence |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | 45 mm rods set for direction control |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | 50N turbine start protection tube |
| 1 x | Ring support P-20 OPUS V-Jet 60mm |
| 1 x | Tank GFK Opus/JEt 300 ml |
| 1 x | OPUS-V / Jet-CC-BF |
| 1 x | Jet Pipe for ULTIMATUM 2m |
| 1 x | Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt |
| 1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
| 1 x | Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re |
| 1 x | Bags de Luxe ULTIMATUM 2.0 |
| 1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
| 1 x | Servo HITEC D950 TW |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
| 1 x | Servo HITEC D625 MW |
| 1 x | Servo HITEC D145 SW |
| 1 x | Receptor MINIMA 6S HITEC |
| 1 x | Servo HITEC HS-5084 MG |
| 1 x | Servo HITEC HS-45 HB |
| 1 x | Servo HITEC D131 MW nano |
| 1 x | Servo HITEC HS-325 BB |
| 1 x | Servo HITEC HS-485 HB |
| 2 x | Starter EM Gear Power 80 |
| 1 x | Servo TOPMODEL DS1413 T |
| 1 x | Air Intake manifold 90° - Large |
| 1 x | Parachute XTRALITE S |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Servo SAVOX SA-128S SG |
| 1 x | SAVOX SH 1250 MG servo digi |
| 1 x | Servo SAVOX SA-1258 TG |
| 1 x | Servoarm SH-81, two sides, aluminium |
| 1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
| 1 x | Propeller CFK 15.5x10 |
| 1 x | Propeller CFK 12.5x7 |
| 1 x | Propeller CFK 20x13 |
| 1 x | Propeller CFK 15x13 |
| 1 x | Propeller CFK 15x7 |
| 1 x | Propeller CFK 13x7.5 |
| 1 x | 1804 2400KV Brushless Motor Qav 250 mini |
| 1 x | ESC ALPHA 60A HV |
| 1 x | Snap long M2 (10 uds) |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
| 1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 1 x | Pushrod octagone 3/2 with coupler M2 |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Servo HITEC HS-645 MG |
| 1 x | Servo HITEC HS-635HB Carbonite |
| 1 x | Servo HITEC HS-56 BB |
| 1 x | Servo HITEC HS-7950TH Ultra Torque HV Coreless Titanium Gear Ser |
| 1 x | Snap short M2 (10 uds) |
| 1 x | USB interface ALTIS |
| 1 x | Telemetry interface ALTIS 6 cm |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | DUPLEX 2.4EX Central Box 210 |
| 1 x | DUPLEX 2,4GHz MRPM EX |
| 1 x | DUPLEX 2.4 EX MBar |
| 1 x | DUPLEX 2.4EX MAlti (Rev.2) |
| 1 x | DUPLEX 2.4EX Expander E2 |
| 2 x | Propeller MENZ-S 16x12 |
| 2 x | Propeller MENZ-S 18x12 |
| 2 x | 20x15 Falcon electric V2 |
| 1 x | Propeller MENZ-S 16x6 3-Blades |
| 2 x | Propeller FALCON 32,5x11 PUSHER Carbono |
| 2 x | Propeller MENZ-S 20x6 |
| 2 x | Propeller MENZ-S 15x8 3 blades |
| 2 x | FALCON 24X9 CARBON PROPELLER (GAS) |
| 2 x | Propeller MENZ-S 17x8 |
| 1 x | Propeller 12x6 Falcon electric |
| 1 x | Propeller MENZ-S 21x10 |
| 1 x | Propeller MENZ-S 20x8 Pusher |
| 1 x | FALCON 25X9 CARBON PROPELLER (GAS) |
| 1 x | D.A. Fueling Valve |
| 1 x | ZENOAH/ZG 20cc |
 |
| 19,463.87EUR |
