| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Cockpit plastic closing |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Covered closure or fairings |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Ferrita 17x10x6.5 mm |
| 2 x | Ferrita 27x14x7 mm |
| 1 x | Ferrita 14x8x5.5 mm |
| 2 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 2 x | OBECHI sheet 2.0x3.0x1000 mm |
| 2 x | Pine wood slat 5.0x5.0x1000 mm |
| 2 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 2 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 2 x | BALSA triangular 10x10x1000 mm |
| 2 x | BALSA trip 10x10x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 2 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | Marker ties (20 pcs) |
| 2 x | Tape GFK 25 mm |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Circlik for shaft 1.5 mm (10 pcs) |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | Smoke set "S" |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | 100 mm rods set for direction control |
| 1 x | SkyMaxx 1.550 mm (kit) |
| 1 x | Pilot Lotsenboot |
| 1 x | Cockpit aluminium closing 4.7g |
| 1 x | MAULE M-7-420 2.8m Red |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Cockpit metalic closing |
| 1 x | Antonov AN2 Scale 1/6 - 3m |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Me-163 |
| 1 x | ROBIN S50E BLUE/WHITE |
| 1 x | Window mounting channel 5m |
| 1 x | WINGO 2 ARF |
| 1 x | Wing bolts M3 Steel screw Red (2 pcs) |
| 1 x | Skyray (RBC Kits) |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | Parachute expulsion foam |
| 1 x | Canopy F9F Panther (Aero-naut) |
| 1 x | DRACO 2.0m BNF |
| 1 x | Mini AVANTI S EDF 80MM RTF |
| 1 x | Cockpit aluminium closing 5.4g |
| 1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
| 1 x | Triple rod con. 2mm Pushrod (2 pcs) |
| 1 x | Mixers smoke bombs AX-60 (5 pcs) |
| 1 x | Split pin 1x8 mm (10 uds) |
| 2 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 2 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Snap short M2 (10 uds) |
| 1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
| 1 x | 28 mm turnbuckle |
| 1 x | 20x200 mm battery rings |
| 1 x | 3 mm Leader (L 100 mm) |
| 1 x | 45 mm flag mast |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | 33,0 mm propeller (left propeller) |
| 2 x | Ferrita con funda |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Shaft sleeve LAMA |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | X-RAY Micro QR (Rudder) |
| 1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 2 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | T-shape holder metal LAMA |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | 3 mm Short Prop Adapter M5 |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Rocket D3-P |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
 |
| 4,960.41EUR |
