1 x | LOGO 600 SX (kit) |
1 x | VTX 477 Carbon Rotorblade |
1 x | Tail boom brace LOGO 480 |
1 x | Support pump Xicoy X45 |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
2 x | 6 mm red aluminium threaded horn with patella |
2 x | Horn 6/20 with M3 Bearing |
1 x | Horn mando small (2 pcs) |
1 x | DYNAMOMETER S-1580 |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Extra long horn 60x30 |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
2 x | Horn mando long (2 pcs) |
2 x | Horn 13,5x16 mm (2 pcs) |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Shirt Hispano Aviación |
1 x | Oracover Black 10 m |
1 x | Horn with ball 40x30 |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Flap hinge (6 pcs) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Deposito combustible tipo "turbina" 330 ml |
1 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
1 x | Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Allen wheel collar M4x4 |
1 x | Large flex hinge (12 uds) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Check valve V2 |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | 280 cc gasoline fuel tank complet |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Emcotec SPS Magnetic Switch Actuator |
1 x | 5 mm M2 variable horn |
1 x | DPSI magnetic switch actuator (PCB) |
1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | BATTWIN BATTERY REDUNDANCY SYSTEM |
1 x | 1/7 Pilot "Japanese" |
1 x | Charger ISDT 608AC 200W |
1 x | 1/12 Pilot "Fighter" |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | Horn 5/10 with M2 Bearing |
1 x | Control horn long w/ball |
1 x | RH long aluminium horn (2pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Control for forward wheel (MINI) |
1 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Indoor hinge with servo arm integraded |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Support Pitot JETI |
1 x | 1000 cc gasoline fuel tank complet |
1 x | SIG Coverall 1.2x4.5 m |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | Oratex Natural White 20m |
1 x | Oracover Yellow CUB 2 m |
1 x | Support conector MPX (6 pcs) |
1 x | Oratex Yellow Cub 10 m |
1 x | Oratex Silver 2m |
2 x | Support FUEL DOT V3 |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | PROFICOVER 5m |
1 x | 1/4 Pilot "Heidi" |
1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Small aluminium horn gold (2pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
1 x | Compact Pitts Muffler OS MAX.35.40 FP |
1 x | ITRAP 50 (175ML) CLASSIC PRO, COMPRESSION BARB FITTINGS - SUIT X |
1 x | 700 ml complete glow fuel tank |
1 x | Junta humo metalica G61 (DLE55RA/DLE61/DLE120) |
1 x | Fuel Station 20L |
1 x | HOPPER tank INTAIRCO iTrap 50 175 ml 3x racor 6mm CLASSIC PRO |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Stickers-digit for marking |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Medium pin type hinge (12 uds) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Propeller APC 14x12 Electric |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Cyanocrylate MD GA460 odourless 20g |
1 x | Propeller APC 10x4.7 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Propeller APC 12x8 SF |
1 x | Propeller APC 12x10 Electric |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Propeller APC 11x8.5 Electric |
1 x | Propeller APC 10x5 Electric |
1 x | Propeller APC 12x6 Electric Pusher |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Spring Clip Ø25 mm |
1 x | HOPPER tank INTAIRCO iTrap 40 95 ml 3x racor 6mm CLASSIC PRO |
1 x | HOPPER tank Digitech 100 ml |
2 x | Quick hose connector 6-4 mm |
2 x | Tank gas KUZA 500 cc |
2 x | Quick hose connector 4-3 mm |
2 x | Tank gas KUZA 260 cc |
2 x | Tygon tube 7.94 x 4.7 mm 15 m |
2 x | T- Fittings red color (2pcs) |
1 x | Deposito DUBRO 1800cc-60oz |
1 x | Pitts Muffler kit for CAP 21 |
1 x | Hose clamps 0.16-0.20in, (4 pieces) |
1 x | HOPPER tank Digitech 250 ml (Festo nipples 6 mm) |
1 x | Intairco CMB Super Filter - 4mm Barb |
1 x | Tube holder |
1 x | QS Bulkhead Valve 6/6 mm |
1 x | Tygon DUBRO Medium 15m |
1 x | Tubo silicona transparente 7 x 3 mm (1m) |
1 x | T-Hose connector 4-4-4mm |
1 x | Tube mounting clips (5 pcs) |
1 x | TYGON tubo 1 m Diam. 3.4 x 2.0 mm |
1 x | T- Fittings blue color (2pcs) |
1 x | Refueling Cup V2 Red |
1 x | TYGON tubo 15 m Diam. 3.4 x 2.0 mm |
1 x | Tubo silicona transparente 3.5 x 2 mm (1m) |
1 x | T-Hose connector 3-3-3 mm |
1 x | Support 45% Hopper JetsMunt |
1 x | Restrictor FESTO 3/3 mm |
1 x | Y-Hose connector 4-4-4mm |
1 x | Quick hose connector 4-4 mm |
1 x | Simple take for fuel tank |
1 x | Refueling Cap V3 Black |
1 x | Tygon tube 4.8 x 3.2 mm 1m |
1 x | Tube mounting clamps |
1 x | Tygon tube 9.53 x 6.35 mm 15 m |
1 x | Double side nipple |
1 x | Tygon tube 6.35 - 3.18 mm 1m |
1 x | Refueling Cap V3 (RED) |
|
5,666.79EUR |