| 1 x | Jeti Black cap |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | Angle measurer |
| 1 x | Field folding model stand SebArt |
| 1 x | Angle of incidence meter |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 2 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | 15 mm reinforced hinge |
| 2 x | 25 mm reinforced hinge |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Gates hinge |
| 3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 2 x | Vacuum bag, 1200 mm x 50 m |
| 2 x | Softshell Hispano Aviación |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Cap Hispano Aviación |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | Medidor ángulos y/o incidencias |
| 1 x | Small flex hinge (12 uds) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 2 x | Panel Honeycom carbon 350x150x3.5mm |
| 1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Chopped glass fibre strands 0.2 mm |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Carbon plate 550x350x1.0 mm ECOTECH |
| 1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
| 1 x | Glass fabric 425 g/m² aero,10x1m |
| 2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 2 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
| 1 x | Carbon plate 350x150x0.5 mm |
| 1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Buy Perforated film 100 cm / 20 m |
| 2 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Carbon plate 550x350x1.5 mm ECOTECH |
| 1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
| 1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 2 x | Styrene plate 320x120x0.5 mm |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 2 x | Teflon rollers 80 mm x 15 mm Diam. |
| 1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
| 2 x | Shirt Hispano Aviación |
| 1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
| 2 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
| 3 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
| 1 x | Glass Bubbles (0,12 g) 350 ml |
| 1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
| 1 x | Epoxy Resin L (2.5 Kg) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 3 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 2 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
| 1 x | TX 250 mW especial GOPRO |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | TrainerCord (master-learner) |
| 1 x | 30 cm BEC cable (male) |
| 1 x | BEC 3A FOXY |
| 1 x | Ferrita 27x14x7 mm |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | 10 mm Quick clamp_L (6 pcs) |
| 1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 2 x | Propeller CFK 16x16 Wide |
| 1 x | Propeller CFK 12.75x13 |
| 1 x | Propeller CFK 20x13 |
| 1 x | Hardener Aero EPH 161 (500 g) |
| 1 x | 5 mm gas motor standoff |
| 1 x | 10 mm gas motor standoff |
| 1 x | aluminium servo arm V1-JR 1,0 inch M2 |
| 2 x | 40 mm gas motor standoff |
| 1 x | Motor Scorpion HKIII 4035-560 Kv |
| 1 x | Actro 32-3 Heli MAX 5mm |
| 2 x | 120x60 mm SLH KOVO wheel |
| 1 x | Antonov AN2 Scale 1/6 - 3m |
| 1 x | Sheet Depron Aero 1250x800x3 mm |
| 2 x | SkyMaxx 1.550 mm (kit) |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
| 1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 1 x | Release film 100 cm x 50 m |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | Propeller CFK 12X6 |
| 1 x | Propeller CFK 23x12 |
| 1 x | Propeller CFK 14x6.5 |
| 1 x | Propeller CFK 14x10 |
| 1 x | Propeller CFK 17x18 |
| 1 x | Propeller CFK 14x8 |
| 1 x | Propeller CFK 18x9 |
| 1 x | Propeller RF CFK 16x8,5 S |
| 1 x | Propeller CFK 13x7.5 |
| 1 x | Propeller CFK 16x13 |
| 2 x | Propeller CFK 15x7 |
| 1 x | Propeller CFK 14x8 Slim |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
| 2 x | Epoxy MID-CURE™ 15 min (130g) |
| 1 x | resin-hardener package L-385 with hardener H-385 |
| 1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
| 1 x | MEKP Harderner 100 g |
| 1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
| 1 x | Cotton Flocks, bag/ 500 g |
| 1 x | Servo inverter |
| 1 x | HITEC DPC-11 programmer |
| 2 x | Epoxy SLOW-CURE™ 30 min (130g) |
| 1 x | Epoxy FINISH-CURE™ 20 min (130g) |
| 1 x | Tail gear set (60-120 class) |
| 1 x | CNC FPV Display screen&Transmitter Holder Vertical |
| 1 x | Debonder UN - CURE™ (30g) |
| 1 x | Extender tip (6 pcs) |
| 1 x | Cyano INSTA - CURE+™ (56g) |
| 1 x | Cyano INSTA - CURE™ Pocket (18g) |
| 1 x | Epoxy SLOW-CURE™ 30 min (260g) |
| 1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
| 1 x | Cyano SUPER - GOLD™ Pocket (18g) |
| 1 x | Cyano INSTA - CURE™ (12g) |
| 1 x | Cyano ULTRA - CURE™ (21g) |
| 1 x | FOAM - CURE™ (24g) |
| 1 x | Cyano SUPER - GOLD™ (12g) |
| 1 x | ExtraCA Top |
| 1 x | Cyano SUPER - GOLD™ THIN (12g) |
| 1 x | Cyano INSTA - CURE™ (56g) |
| 1 x | Tailwheel for 20/60 size |
| 2 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
| 2 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
| 2 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 2 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
| 1 x | Antenna holder bracket double |
| 1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
| 1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
| 1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
| 1 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
| 1 x | Motor OS 3820-1200 electric |
| 1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
| 1 x | Crystal Universal RX 35.070 Ch 67 |
| 1 x | wire tensioner (black) |
| 1 x | Battery bed V2_S (black) |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | Wire easy tensioner (red) |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
| 1 x | Propeller RF CFK 10x17 |
| 1 x | Propeller CFK 15x13 Slim |
| 1 x | Propeller RF CFK 13x6.5 |
| 1 x | Propeller CFK 14.5x10 Slim |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
| 1 x | Fiberglass tube 6/4x1000mm |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Spring clamp for tube Ø50 mm |
| 1 x | Carburetor for ZG45SL and ZG62/S/SL |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Spring Clip Ø25 mm |
| 1 x | Pick up DA50/100/150 |
| 1 x | Switch Cap L (black) |
| 1 x | Transmitter Crystal 35 Mc/s Ch 62 |
| 1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
| 1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
 |
| 16,898.10EUR |
