1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
3 x | Green silicone 0,25 mm² wire (25 m) |
2 x | JR silicone servo wire 0,35 qmm / 5m |
2 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Bungee HLG Premium |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | 80 mm rods set for direction control |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Servo Arm aluminium ALU-STAR |
2 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | Spare Part Frame Set for EACHINE RACER 250 |
1 x | Combo 4 pcs AXI 2204 Multicopter |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Extension MPX-MPX 20 cm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | Silicone black 1,5 qmm wire ( 1 m) |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Silicone red 4,0 qmm wire ( 1 m) |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | 5 line servos wire black (1 m) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Red silicone 1,0 qmm wire (50 m) |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Silicone black 6,0 qmm wire (25 m) |
2 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | Release film 100 cm x 50 m |
1 x | Fiberglass plate 620x540x3,2 mm |
1 x | Film release agent PVA 25 ml |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
2 x | ABS "T" angle 2.0x2.0x1000 mm |
2 x | L-Connector 1.5 mm x 1000 mm |
2 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Pilatus PC-21 50E RED/WHITE (SebArt) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Silicone black 2,5 qmm wire ( 1 m) |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Ball Link Plier |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
2 x | Silicone red 1,5 qmm wire ( 25 m) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Silicone red 6,0 qmm wire ( 1 m) |
1 x | AC-10 pre-rotacion with motor |
3 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | 200m servo "Premium" wire (white/red/blue) |
2 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
2 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Z Bender - S Type Tool |
1 x | Silicone black 0,75 qmm wire ( 25 m) |
1 x | Silicone red 0,5 qmm wire ( 1 m) |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Male connector for 10 pines AWG |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | Motor mount class 48" |
1 x | Motor mount VANQUIST 48" F3A |
1 x | Vasa model Catapult |
1 x | USBCOM 5i |
1 x | Propeller MEJLIK 24x10 TH |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | 102 mm aluminium spinner |
1 x | Cono NUT 5/16"x 24 -M4 |
1 x | XPower XC4226/12 LS |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Propeller MEJLIK 21x8 CFK |
1 x | Propeller MEJLIK 16x11 3 Blades |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | 3 LiPo XH>EH adapter |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Extension for LC-Display 50cm |
1 x | PowerBox Smokepump |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Vacuum pump 12 CFM |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Rubber profile 8-2 mm 2M |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Rubber profile 10-2 mm 2M |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Combo KAVAN C3536-1250 + KAVANA R50SB + |
1 x | AXI 2820/12 CYCLONE |
1 x | Silicone red 6,0 qmm wire (25 m) |
1 x | Spinner 90 mm GFK |
1 x | Spinner 105 mm CFK |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | RCEXL Electronic ignition twin CM-6 |
1 x | Motor mount EDGE 540 48" |
1 x | Connectors MPX male |
1 x | Spinner 102 mm |
1 x | 82 mm aluminium spinner. |
1 x | Crystal Universal RX 35.070 Ch 67 |
1 x | Copier 2x20 cm pcs |
1 x | 70 mm aluminium spinner. |
1 x | Spinner 80 mm GFK |
1 x | Silicone red 0,5 qmm wire ( 25 m) |
1 x | Spinner 159x200 mm GFK |
1 x | E-FUN BUG (ROI-Import) |
1 x | Actro 32-3 Heli MAX 5mm |
1 x | Motor XPower F2915/12 XLight |
2 x | Restrictor FESTO 3/3 mm |
2 x | Gearwheel 9724/09 for ZG 45 |
2 x | Absorver mount set for 5-10 Kg models |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
2 x | Mudguard wheels 112/127 mm |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Metal ring front FEMA |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Compact on-board starting system (9713) |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | Wheel FEMA 178 mm / 8 mm |
1 x | Compact on-board starting system (9724) |
1 x | Wheel FEMA 112 mm / 6 mm |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | Compact on-board starting system (9512) |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | 150 Newtons FEMA absorber |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | Head runner |
1 x | Mudguard for 140/165 mm wheels |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Brake for 140 mm wheels |
1 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | 200 Newtons FEMA absorber |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Compact on-board starting system (9525) |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Compact on-board starting system (9715) |
1 x | Servo holder for retract |
1 x | 400 Newtons FEMA absorber |
1 x | Wheel FEMA 152 mm / 8 mm |
|
10,981.38EUR |