2 x | Window mounting channel Type H 2.5x0.5 (2 m) |
2 x | DLE Ignition 111/120/170 |
2 x | Futaba BLS255/272/471SV - Gear Set |
3 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
2 x | 18m Fitting barb |
4 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
2 x | Pendulun 27g to tank |
2 x | 22m Fitting barb |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | 1/10 Pilot "Jimmy" |
3 x | Horn 6/27 with M3 Bearing |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
2 x | Oracover Azul 2 m |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Buy Perforated film 100 cm / 50 m |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
2 x | Angle measurer |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | Carbon fibre sandwich sheet 350x150x3 mm |
2 x | ESC ALPHA 60A HV |
3 x | Brass control horn M2 long for wire (10pcs) |
4 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Blind nut M5 (4 pcs) |
1 x | Blue smoke canister 100 g |
2 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Threaded coupler M2 (10 uds) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Dean "T" - Futaba Adapter |
1 x | ABS I Strip 10x5x1000 mm |
2 x | Aluminium wide washer M3 red (4 pcs) |
2 x | 12 mm floating pad (49 pcs) |
1 x | 6 mm aluminium horn with patella |
4 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | TX 250 mW especial GOPRO |
1 x | Adjustable brass horn threaded M3 |
1 x | |
3 x | 1,6x1000 mm 2:1 black termoretract tube |
2 x | B4-0 rocket charges (6 pcs) |
2 x | 25 mm Sandpaper file |
3 x | 6 mm Quick clamp_S (10 pcs) |
1 x | CC 11 Conector |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Fixed launching hook |
2 x | 2,4x1000 mm 2:1 green termoretract tube |
2 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Initior Receiver FRX2 Wireless |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
5 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
3 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Dean-T Plug Mold |
1 x | Parachute BACKUP X100 |
2 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Banna gold connector 2,5 mm (M/F) |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Smoke set "S" |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
4 x | 6,4x1000 mm 2:1 green termoretract tube |
2 x | White smoke bombs AX-60 (5 pcs) |
2 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | Buy Perforated film 100 cm / 10 m |
4 x | 6 mm M3 variable inclined horn |
1 x | Conector JR Servo female (10 pcs) |
2 x | Round Rod 6,0x1000 mm |
1 x | Green smoke canister 65 g |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
2 x | Extractor piñones 2.3/3.2 mm |
2 x | 12,7x1000 mm 2:1 green termoretract tube |
2 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | 30 cm DEANS female connector |
1 x | Brass ball links BS M3 V1 (10 pcs) |
3 x | Micro Tarjeta SD Rapid Rush 16 GB |
1 x | Monokote ROJO misil (1.8x0.65m) |
2 x | One touch canopy lock |
2 x | Smoke set "M" |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Ventus 1:4 set of instruments |
2 x | Smoke set "Glider" |
2 x | |
3 x | Field folding model stand SebArt |
3 x | Conector Servo female 4 pines |
2 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | Straightened rod Ø 2.0 mm x 1000 mm |
5 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Anntena Panel 5,8 GHz - 14 dBi |
2 x | Para-RC Mix |
3 x | Truck-trailer for gliders 720 x 239 mm |
2 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Black smoke bombs AX-60 (5 pcs) |
3 x | ABS Strip 1.5x2.0x1000 mm |
4 x | 6,4x1000 mm 2:1 blue termoretract tube |
2 x | White smoke bombs AX-18 (5 pcs) |
3 x | CNC FPV Display screen&Transmitter Holder Vertical |
2 x | 3l Smoke oil |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
5 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Strip 2,5x1,25x330 mm |
2 x | 12.7 mm 2:1 black termoretract tube |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Monokote BLANCO jet (1.8x0.65m) |
2 x | 30 cm MULTIPLEX female connector |
2 x | Surface Indicator Gauge Small |
3 x | Strip ABS 2.0x3.0x1000 mm |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
3 x | 4,8x1000 mm 2:1 black termoretract tube |
2 x | Oracover Black 2 m |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Connectors banna oro 6,0 mm (M/F) |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
2 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
3 x | Oracover Brown 2 m |
4 x | Ventral support for AX-18/AX-60 |
2 x | Ball Link Plier |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Tow hook for tug |
1 x | Horn 6/20 with M3 Bearing |
2 x | Stickers-digit for marking |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
2 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
3 x | Parachutist |
2 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
2 x | Connectors MPX male (PIN double) |
3 x | Short adjustable control horn 3x24 |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
3 x | Round Rod 2,5x1000 mm |
1 x | 2,0x50 mm allen screwdriver |
3 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Ferrita con funda |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
2 x | Silicone black 1,0 qmm wire ( 1 m) |
2 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Red 3m5 mm connector holder |
5 x | LS-8 GFK 6m Glider |
3 x | Servo HITEC HS-53 |
4 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Conector JR Servo male (10 pcs) |
1 x | Nut M2 securing |
1 x | Connectors banna oro 0,8 mm (M/F) |
3 x | Propeller balancer |
1 x | Strip 3,5x1,75x330 mm |
1 x | Red aluminium servo arm V2-Futaba 2,0 inch |
4 x | M3-M4 rubber washer (8 pcs) |
1 x | Connectors MPX male |
3 x | Nut M2 |
2 x | Field folding model stand |
1 x | Angle of incidence meter |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
2 x | Bearing 3x6x2,5 |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
4 x | Servo TT ACE SHV 1504 MG |
3 x | Screw M3x16 (10 pcs) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Gear set HITEC HS-125MG/5125MG |
2 x | MPX Support (2 pcs) |
2 x | 2 mm male connector (2 pcs) with safety connector |
3 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Landing gear axle Ø 5 mm (2 uds) |
2 x | Lock washer 2.7 mm (20 pcs) |
2 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
2 x | ABS Strip 1.0x5.0x1000 mm |
2 x | ALU servo arm 3 mm shaft |
1 x | Nylon Screw M4x20 |
3 x | Ply-Span 450x600/13g Orange |
1 x | Digital scale up to 40 kg |
1 x | Medidor ángulos y/o incidencias |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
3 x | Rudder forward 70x28 "type Kato" |
2 x | Cut tube |
1 x | 4 mm Prop Adapter M6 |
3 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
1 x | SE Ring 350 mm (2 pcs) |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
3 x | PVC 0,08 qmm Futaba servos wire (5 m) |
2 x | Round Rod 1,5x1000 mm |
5 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
3 x | Ply-Span 450x600/13g Red |
1 x | Nut for mounting M5 (4 pcs) |
3 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | 100g Flux Paste for Silver Solder |
1 x | 2 mm Prop Adapter M5 |
2 x | XH male balance (3S) connector (2 pcs) |
2 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | Stainless steel cable Ø 0.5 mm (2 m) |
4 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
3 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Servo HITEC HS-125 MG |
1 x | Gear set HITEC HS-85 |
1 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
1 x | 6 mm red aluminium threaded horn with patella |
2 x | PVC transparent red battery termo-retract 68 mm (10 m) |
1 x | Lock nut M4 (10 pcs) |
2 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | Servo HITEC HS-5245 MG Digi |
1 x | Vacuum pump P1-N |
3 x | Trike XL motor set (motor+esc+prop) |
2 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
2 x | Horn 5/20 with M2 Bearing |
2 x | Spikes Band (5 m) |
2 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
3 x | Connector CAN 15 |
2 x | Screw M3x20 (10 pcs) |
1 x | Conector JR Servo male (10 pcs) |
2 x | Strip 1,5x1,5x330 mm |
2 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
3 x | White smoke bombs AX-9 (10 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Glass fabric 25 g/m² (1 m²) |
2 x | PIN Connector female (100 pcs) |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Swift S1 De-luxe 3.730 mm |
4 x | Small aluminium horn gold (2pcs) |
2 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
1 x | Swift 5050 mm (Airwold) |
1 x | Micro control horn (2 pcs) |
1 x | Small adjustable control horn with bearing |
2 x | Wing tips support for AX-18/AX-60 (2 pcs) |
3 x | LO 100 ARC 3.3m |
3 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
1 x | Elevator VENTUS 2cx 4.5m |
7 x | SlowFlyer control horn (3 pcs) |
2 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
4 x | ASK 21 6.5m + pylona |
4 x | LUNAK 4,00 m |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Ventus 2cx 4.5 m Sapare Fuselaje |
1 x | Short extra-strong control horn with bearing 2,8x15 |
5 x | LO 100 ARC 3.3m,frame canopy |
3 x | Set of buckles and strap, 1:4 scale. |
5 x | SHK 4000 mm Scale 1:4.25, V-Tails |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
2 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Small control horn with bearing (2 pcs) |
2 x | Kobuz 5000 mm (Airwold) |
4 x | Fox MDM 1 4000 mm DeLuxe |
1 x | Long extra-strong control horn with bearing 2,8x34 |
2 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
6 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
4 x | Small aluminium horn red (2pcs) |
1 x | Fournier RF-4D |
1 x | ASW 20 5000 mm with winglets (Airwold) |
4 x | Fox 4000 mm (Airwold) |
1 x | Ventus 2cx 4.5 m de Luxe |
9 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
2 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Horns indoor |
2 x | Long adjustable aluminium control horn 2,8x24 |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
3 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
2 x | SOLOFOX 5m Voll-GfK |
3 x | Fox MDM 1 6000 mm |
3 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
2 x | Fox MDM 1 4000 mm DeLuxe,cabina |
1 x | Rudder forward 90x28 "type Kato" |
1 x | DG-303 ACRO 3750 mm, canopy |
1 x | Small aluminium horn blue (2pcs) |
1 x | LO 100 ARC 3.3m,cabina |
2 x | Rudder forward 80x28 "type Kato" |
1 x | Ventus 2cx 4.5 m |
3 x | Small adjustable aluminium control horn with bearing 2,8x15 |
3 x | DG-303 ACRO 3750 mm, winglets |
2 x | Long horn 50x26 |
2 x | Long adjustable control horn 3x34 |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
4 x | Fox MDM 1 4000 mm Std. |
1 x | Long adjustable control horn with bearing |
2 x | Remote electric ignition system |
2 x | SAGITA Alsema 4.0 m |
7 x | DG-303 ACRO 3750 mm (Airworld) |
3 x | Gobe R-26S (Airwold) |
1 x | Ventus 2cx 4.5 m Winglets |
1 x | XH LiPo extension lead |
2 x | Lock washer 4.3 mm (20 pcs) |
1 x | SUS wire 3m (nylon coated) |
3 x | AX-60 starters (5 pcs) |
1 x | Servo HITEC HS-5085 MG Digi |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
2 x | Motor PERMAX BL-O 3520-920 (Extra 330 SC) |
1 x | Bird (Aero-naut) |
1 x | 40 mm white plastic spinner for fixed propeller |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Pump hose (Ø 6/8 mm) transparent |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Socket Head Screw M2x8 |
1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
1 x | Shaft for A60-XS-V2 (112,5mm) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | PowerBox Champion SRS |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | 36 mm black plastic spinner for fixed propeller |
2 x | 4 mm Prop Adapter M8 |
4 x | Horn 20x28,5 mm (2 pcs) |
3 x | Swift S1 De-luxe 3.140 mm |
3 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
5 x | ASK 21 6.8m |
4 x | Fox 4000 mm with flaps (Airwold) |
2 x | ASW 15 5000 mm (Airwold) |
1 x | SHK 4000 mm Scale 1:4.25 |
2 x | M3 black washers (4 pcs) |
1 x | X-RAY Micro QR (Elevator) |
1 x | Straightened threaded rod M2-1m |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Screw-lock connector M2 (2 uds) |
3 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Tank + hopper Kevlar ASPIRE 6 L Kero |
2 x | Bag connector 2 mm |
1 x | Threaded insert M5 (10 pcs) |
2 x | Split pin 1.6x16 mm (10 uds) |
2 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | SAVOX SH 0254 servo |
1 x | Cable control set |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
2 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
3 x | Steering arm 16 mm Ø 4 mm |
1 x | Blind nut M4 (4 pcs) |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Blind nut M3 (4 pcs) |
3 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Rescue 1,8m2 / BackPack |
1 x | Screw M3x16 |
2 x | XT-30 connector (pair) |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
3 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Servo HITEC HS-311 |
3 x | Blade holder center |
3 x | Screw M2x8 (10 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Mounting base Ms 12 mm |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Silicone black 1,5 qmm wire ( 1 m) |
1 x | Protector Connector MPX (1 pair) |
1 x | Welder 100W/200V |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
3 x | Screw M3x8(10 pcs) |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Set cintas unión paracaídas 145 cm |
1 x | Canopy Astra |
3 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
2 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | 3,2 mm Prop Adapter M5 |
1 x | XT-60 connector (female) |
2 x | Spinner plastic white fixed propeller 30 mm |
2 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Charging Extension 50cm for 2 Battery |
2 x | 2 mm Prop Adapter M6 |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | Silicone red 0,5 qmm wire ( 1 m) |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | PowerBox iGyro SRS |
1 x | 20x200 mm battery rings |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | XT-60 Plug Mold |
1 x | 63 mm INO spinner (carbon imitation) |
1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | Silicone black 4,0 qmm wire ( 1 m) |
1 x | Starter EM Gear Power 250 |
1 x | Blue Aluminium lock nut M4 (4 pcs) |
2 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | White smoke bombs AX-3 (10 pcs) |
2 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Round Rod 2,0x1000 mm |
1 x | Pushrod octagone 4/3 |
1 x | Servo HITEC HS-85 BB |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
2 x | Nut M1,6 |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Carbon plate 350x150x1.0 mm |
2 x | Vacuum pump 12 CFM |
2 x | XH male balance (2S) connector (2 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
3 x | Screw M3x30 (10 pcs) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Compact Silencer KOLM BX-155 |
1 x | Metal clevis M2 (10 uds) |
3 x | Red smoke canister 100 g |
1 x | Servo HITEC HS-82 MG |
1 x | Cannon 12.7 cm (2 pcs) |
2 x | Oracover Yellow CUB 2 m |
2 x | Spring lock washer 4.1 mm (20 pcs) |
2 x | XH female balance (7S) connector (2 pcs) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
2 x | White smoke canister 140 g |
1 x | Shaft for A60-L (140mm) |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
1 x | XT-90 connector (pair) |
1 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Moki Pushrod S250 (1 pcs) |
2 x | Lock washer 2.2 mm (20 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | USBCOM 5i |
2 x | Electric rocket starters (6 pcs) |
1 x | Nut for mounting M2,5 (4 pcs) |
2 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Motor OS 3820-1200 electric |
2 x | Electric spoiler 250 mm (2 pcs) |
2 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
1 x | Propeller 3x2 |
2 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
4 x | Socket Head Screw M2x10 |
1 x | ASPIRE Red ARF 2.000 mm, Set Elevators |
1 x | Spinner INOVA 45 mm White |
1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | Red aluminium double servo arm FUTABA 2,5inch M3 |
1 x | Head core |
1 x | TopFuel LiPo 25C-ECO-X 1300mAh 2S |
1 x | Threaded insert M4 (4 pcs) |
1 x | Fully Threaded Steel Rod M3 |
1 x | White silicone 0,25 qmm wire (150 m) |
3 x | SIMtransmitter 6 Mode 2 |
1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
1 x | Nut for mounting M6 (4 pcs) |
2 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
1 x | Propeller POWER-PROP 7x7 |
2 x | Chili Race F3K (aramid nose) |
1 x | Crystal Universal RX 35.020 Ch 62 |
3 x | Cyano INSTA - FLEX+™ (25g) |
3 x | Socket Head Screw M2x12 |
1 x | Servo HITEC HS-56 BB |
2 x | Micro control horn T2 Ø 1 |
2 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | 5 mm Prop Adapter M6 |
3 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
3 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | XH male balance (4S) connector (2 pcs) |
2 x | Flat washer 3.2 mm (20 pcs) |
1 x | Screw M4x20 (10 pcs) |
1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
3 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Ring 320 mm length (5 pcs) |
1 x | Spark motor OS nº 3 |
1 x | 51 mm INO spinner (carbon imitation) |
1 x | Set Micro-horns HS-60/81/85 |
1 x | Green smoke canister 140 g |
1 x | Horn DUBRO 1/2A |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Screw M3x5 (10 pcs) |
2 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Servo HITEC D950 TW |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Dust collector for mould cleaning |
1 x | Universal Filter |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | Carbon plate 350x150x2.5 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | MIG AC 400 /14 |
1 x | 5 mm M2 variable horn |
2 x | Pan head screw M2x16 PH |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
2 x | Oracover Yellow CADMIO 10 m |
2 x | ORACOVER Fluor red (2 m) |
1 x | Blue smoke canister 140 g |
2 x | PVC red battery termo-retract 68 mm (10 m) |
1 x | Light semi-synthetic Oil PUTOLINE TT (1l) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | 19 mm 2:1 black termoretract tube |
1 x | Cyano SUPER - GOLD™ (12g) |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | FesEx-Uni6 System |
1 x | Silicone black 2,5 qmm wire ( 1 m) |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
2 x | Screw M4x12 (10 pcs) |
3 x | Socket Head Screw M2x5 |
2 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Horn mando small (2 pcs) |
3 x | PVC transparent battery termo-retract 195 mm (1 m) |
2 x | Head upper part |
1 x | White smoke canister 65 g |
1 x | Parachute PV6 for F3J |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Steel Screw M1x8 (10 pcs) |
1 x | Set Legs + Wheels with brake ASPIRE |
2 x | Oracover Azul Cielo 2 m |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
3 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | T-Hose connector 3-3-3 mm |
1 x | Allen wheel collar M4x6 |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
2 x | Screw M2x6 (10 pcs) |
3 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | ZENOAH ZG 80B |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Hose stopper 4 mm |
3 x | Pan Head Screw M2x6 PH |
2 x | Bearings for motor HACKER C50 |
3 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Bidule 111 3000 mm Canopy |
2 x | Socket Head Screw M2,5x12 |
2 x | Silicone red 4,0 qmm wire ( 1 m) |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Frontal support Speed 280 |
8 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Spark plug key NGK MVVS |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Nut for mounting M2 (4 pcs) |
2 x | Lock washer 3.2 mm (20 pcs) |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
3 x | Servo Fork |
2 x | Oracover Yellow CADMIO 2 m |
1 x | Glider Ka 7 Red (2540mm) |
2 x | 5 mm M2 variable inclined horn |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
1 x | 10 mm aluminium spinner (Kavan) |
1 x | METEOR 1.000 mm kit |
1 x | X-RAY Micro QR (Fuselage with canopy) |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | HBC 10035-3 32-Bit |
3 x | Protective Cover for wires Ø 20 mm 1000 mm |
2 x | 3,2 mm Prop Adapter M6 |
1 x | CAM-Carbon Light Prop 12x6" |
1 x | Oracover White 2 m |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Extender tip (6 pcs) |
1 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | Ball Link Plier |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Horn with ball 40x30 |
2 x | Round Rod 3,0x1000 mm |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | Sparkplug 1/4-32 EVO 10GX |
1 x | Regulador NAVY 540R |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
3 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | 3 mm Prop Adapter M6 |
1 x | VAGABOND 1500 mm ARF V2 (Red) |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
2 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Red smoke canister 140 g |
2 x | Propeller 11x4,7 SlowFlyer |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Connectors MPX black female |
2 x | Pan Head Screw M2x8 PH |
2 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
2 x | Ply-Span 450x600/13g Black |
1 x | Fan for A60 |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Quick hose connector 6-6 mm |
1 x | Baffles for Radial Moki S180/320 mm |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Motor HP 220/30/A3 P4 5:1 |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Crystal Universal RX 35.070 Ch 67 |
1 x | XPower XC4226/12 LS |
1 x | Propeller electric carbon 9.5x6 |
1 x | Floating M3 washer pad (36 pcs) |
1 x | ODYSSEY ARF 2190 mm + Electric Landig Gear,COMBO |
1 x | Neck strap JETI DS |
1 x | P-51D "Blondie" 89" (2260 mm) |
3 x | XH male balance (9S) connector (2 pcs) |
1 x | "M" set |
1 x | Hexagonal Nut M1,6 (10 pcs) |
3 x | Yellow smoke canister 100 g |
1 x | Tip wing protector 30x10 (2 pcs) |
2 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Gear set HITEC HS-55 |
1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
1 x | Tape GFK 50 mm |
1 x | Mini VISION "spread tow" CFK |
3 x | Round Rod 5,0x1000 mm |
2 x | Tip wing protector 28x10x12 (2 pcs) |
2 x | A60 Motor Mount Alu complete set |
2 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Catalyst INSTA - SET™ (60g) |
2 x | Rotorshape Elevator |
2 x | Horn mando long (2 pcs) |
1 x | CAM-Carbon Light Prop 9x5" PHANTOM (Prop right) |
1 x | Sparkplug NGK CM6 |
1 x | 75 mm INO spinner (carbon imitation) |
1 x | Motor DA 120 |
1 x | Flip ARF (Top Model) |
1 x | Nut for mounting M3 (4 pcs) |
1 x | Engine Kolm BX-155-2 with starter |
2 x | ABS I Strip 20x10x1000 mm |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
2 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Servo Mount M (blue) |
1 x | SIG Coverall 1.2x4.5 m |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Stainless steel flange for VM 60/70/120/140 |
1 x | Hitec 52 mm servo arm |
2 x | Red smoke canister 65 g |
2 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | "S" set for boats |
1 x | PCARD Wireless System |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Oracover Orange 2 m |
2 x | Washer 2.2×4 |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | DA 70 Twin Gas Engine |
1 x | ZENOAH ZG 62 SL |
1 x | Nylon Screw M5x30 |
1 x | Central support Speed 280 |
2 x | Motor Advance 30-10 F3A |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Propeller electric carbon 6.5x4 |
1 x | ZENOAH ZG 26SC with magneto ignition |
1 x | Servo HITEC HS-7954 SH Digital High |
1 x | Servo SAVOX SB-2290 SG |
1 x | FESTO connector M7 Quick 6 mm |
1 x | Racor 4/3 mm |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Propeller electric carbon 10x8 |
1 x | Tank Kevlar ASPIRE 6 L Kero |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Connectors DEANS (T) |
1 x | Propeller APC 10x4.7 SF |
1 x | Socket Screw M3x9 mm |
3 x | Rotor Mast |
1 x | Header ZG 45/62, "wide" |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
2 x | ABS Strip 1.5x8.0x1000 mm |
1 x | THERMIK XL 4000 mm |
2 x | RH long aluminium horn (2pcs) |
1 x | Focke Wulf FW-190A-8 93", Electric retract Landing gear |
1 x | Oracover White 10 m |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
2 x | Servo M2x9/16 screw (4 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
2 x | Connectors banna oro 3,5 mm (M/F) |
1 x | FOX ARF 2000 mm Red (Hacker Model) |
2 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | Fiberglass motor-holder for electric motors |
1 x | Axle for AXI 2814/xx motors |
1 x | VALACH VM 85 B2-FS |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Ion Pro, Canopy (JP Model) |
1 x | Propeller APC 11x10 Electric |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Threaded insert M6 (10 pcs) |
1 x | Antiaircraft gun 10.5 cm (2 pcs) |
1 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | QS Bulkhead Valve 6/6 mm |
1 x | Propeller electric carbon 9.5x7 |
2 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Gasket carb - intake manifold for ZG 74B/ZG 80G |
2 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Titanium M3x0,5x6 mm Flat Head screw (4 pcs) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Astra (Top Model) |
1 x | Propeller hub spacer 8/5.5 |
1 x | Cilinder joint for G230RC/G260RC |
3 x | Ply-Span 450x600/13g Blue |
1 x | Electric coversion set |
1 x | Roller cutter 28 mm |
1 x | Sparkplug ROSSI R8 |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Propeller CFK 14x10 |
1 x | Futaba 30 mm servo rounded arm |
1 x | EVOLUTION 10 GX gasoline motor |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | 55 mm aluminium spinner (Kavan) |
1 x | CAM-Carbon Light Prop 11x6" |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
3 x | 3,2 mm Prop Adapter M8 |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | Propeller CFK 18x9 |
1 x | Catalog AERO-NAUT 2016 |
1 x | Extra long horn 60x30 |
1 x | Carburator gasket MOKI |
1 x | Threaded coupler M3 (10 uds) |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | X-RAY Micro QR (Tail Tube) |
2 x | Head runner |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | 28x5 mm wires output (2 pcs) |
3 x | Servo HITEC HS-5625 MG Digi |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Sparkplug DLE CM6 |
2 x | PVC lilac battery termo-retract 70 mm (10 m) |
1 x | SWTU2 switch |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
2 x | Servo DITEX TD2612S |
1 x | Starter Sullivan-STAR 601 |
1 x | Car Charger DC/DS-16 |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
1 x | Motor mount for 1200 mm models |
1 x | Mounting base Ms 8 mm |
1 x | BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC |
1 x | 2,5x60 mm allen screwdriver |
1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
1 x | Ka 8 B (Top Model) |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | SE Ring 200 mm (2 pcs) |
1 x | SIG Coverall 1.2x1.8 m |
2 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Propeller CFK 14x6.5 |
1 x | A50 Motor Mount Alu complete set |
1 x | BEC 3A FOXY |
1 x | Quick hose connector 3-3 mm |
1 x | Three-function control switch by FUTABA |
1 x | Cable adapter iCharger |
1 x | CAM-Carbon Light Prop 14x6" (Prop left) |
1 x | HITEC 20 mm servo arm with ball link |
2 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | Shaft sleeve LAMA |
1 x | SLICK 360-B 104" (2640 mm) |
2 x | Allen wheel collar M3x3 |
1 x | Cooler motor type 150 |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | LA500 pre-rotation gear hub |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
2 x | Quicklock washer 3 mm (10 pcs) |
1 x | FOXY G2 C3530-700 |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | Motor mount for 1 m models |
2 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
2 x | Side Plate |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | 55% silver electrodes (2 pcs) |
1 x | Silicone red 0,75 qmm wire ( 25 m) |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Debonder UN - CURE™ (30g) |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Fascination 3600 mm, Canopy (Top Model) |
3 x | Yellow smoke canister 140 g |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Tank ULTIMATUM 2.0 (3.2 L) PRO |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | Socket Screw M2x3 mm (4 pcs) |
1 x | Miss ULTIMATE 50E Red/Black |
1 x | Servo HITEC HS-225 BB |
1 x | Servo HITEC HS-5585MH |
1 x | Savox Brushless Servo SB-2271SG |
1 x | MythoS 50E White/Blue |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | 15 cm PTFE-tubing for 25 mm tubes |
1 x | Split M1,2x10 (10 pcs) |
1 x | LUCAS pilot ARTF |
2 x | Screw M4x30 (10 pcs) |
1 x | Bags de Luxe ODYSSEY |
1 x | Head lower part New |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Propeller CFK 17x18 |
1 x | Cable with accesories |
1 x | Cylinder Gasket set for DA-60 / DA-120 |
1 x | Ply-Span 450x600/13g Yellow |
1 x | CAM-Carbon Light Prop 10x4.5" (Prop right) |
2 x | Spinner INO 89 mm Chrome (Imitacion metal) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Blue silicone 0,5 qmm wire (50 m) |
1 x | Horn 5/10 with M2 Bearing |
1 x | 400 Newtons FEMA absorber |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Gasket for motor DA 50 |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | 3.2 mm Prop Adapter M6 |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | 4 mm Prop Adapter M8 |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Focke Wulf FW-190A-8 93" (2362 mm) |
1 x | Protector Connector Dean-T (1 pair) |
1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Excentric gearbox for 2,0mm axis (3,75:1) |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Avia (Top Model) |
1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
1 x | Wing OXY 0,5 pulgadas2 |
2 x | MPX screwable clips (5 pcs) |
1 x | Servo Bolt M3x8 (8 pcs) |
1 x | FESTO connector M7 Quick 6mm 90º |
1 x | Ion Pro NG electric with flaps ORANGE (JP Model) |
1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
1 x | Fascination 3600 mm ARC |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Servo HITEC HS-85 MG |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Bags BULL Mo1 2.6m "Luxe" |
1 x | Crystal Universal RX 35.090 Ch 69 |
1 x | OLED-Display for PowerBox Mercury SRS |
1 x | Propeller POWER-PROP 10x6 |
1 x | Hacker A30-S Radial Set |
1 x | FESTO connector M5 Quick 4 mm |
2 x | 5 mm Prop Adapter M8 |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Cyano INSTA - CURE™ (225g) |
1 x | FESTO connector M7 Quick 4 mm |
1 x | Silicone black 0,5 qmm wire ( 1 m) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Strip 2,0x2,0x330 mm |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | Propeller APC 12x10 Electric |
1 x | Servo HS-5070 MH Hi Volt |
1 x | Motor Advance 50-6 |
1 x | MOKI S250 Intake Bend |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | 42 mm white plastic spinner for fixed propeller |
1 x | Red 4 mm connector holder |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
1 x | CAM-Carbon Light Prop 13x5" (Prop right) |
1 x | Savox Brushless Servo SC-1267 SG |
3 x | Raer wall |
1 x | Cylinder for ZG20 |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | X-RAY Micro QR |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | XT-60 connector (male) |
1 x | PowerBox iGyro 1e |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
1 x | Balls 4 mm |
1 x | Gasket, Aluminium-Plate >reed valve carrier DA-170 |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | LA500 Autogyro |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | Head lower part |
1 x | Axle for motor A20-S (3 uds) |
1 x | Propeller APC 10x4.5 MR Electric Pusher |
2 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Cylinder for DA-85/170 (1 piece) |
1 x | Cockpit aluminium closing |
1 x | Rotorhead pushrod |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Receiver bed (Blue) |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | Servo HS-5565MH High Voltage |
1 x | Propeller APC 12x4.5 MR |
1 x | Snap long M2 (10 uds) |
1 x | 1,5x50 mm allen screwdriver |
1 x | 16x10 tree blades propeller Master Airscrew |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Dummy motor GPW Wasp Scale 1/4 |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | Race Outboard MERCURY type A |
1 x | Challenger ARF (Top Model) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Silicone black 6,0 qmm wire (25 m) |
1 x | PC-21 PILATUS Spinner Scale Red 3 Blades |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Baering 3x8x4 |
1 x | Propeller APC 13x6.5 Electric |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | Motor Moki S 250 cc 5 cylinders |
1 x | Oracover Green10 m |
1 x | Motor holder AXI |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Horn 6/35 with M3 Bearing |
1 x | CAM-Carbon Light Prop 9x5" PHANTOM (Prop left) |
1 x | Miss ULTIMATE 50E Yellow/Black |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Propeller APC 7x5 SF |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | EASYGLIDER 4 RR |
1 x | Exhaust gasket DA-150 |
1 x | Propeller balancer |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Futaba 46 mm servo arm with ball link |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | 6 mm Prop Adapter M8 |
1 x | Horizontal servo holder |
1 x | ODYSSEY CUST ARF 2190 mm |
1 x | Wheel keeper washer |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Bearing housing |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | CAM-Carbon Light Prop 11x7" |
1 x | ODYSSEY Blue ARF 2190 mm |
1 x | Dumper propeller 6/8 mm |
1 x | 5 mm Prop Adapter M6 |
1 x | Propeller CFK 15.5x10 |
1 x | Top light bright 10mm/3V (2 pcs) |
2 x | "S" set for planes |
1 x | Cyano ULTRA - CURE™ (21g) |
1 x | Motor wall |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Screw M2.5x10 (10 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | 45 mm white plastic spinner for fixed propeller |
1 x | CAM-Carbon Light Prop 10x7" |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | T-Hose connector 6-6-6 mm |
2 x | ALU servo arm 90º 3 mm shaft |
1 x | Switch Cap L (black) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Festo Adaptor Tygon Large/4mm |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Servo SAVOX SV-1270 TG |
1 x | PowerBUS Lead 60 cm |
1 x | Spinner plastic red fixed propeller 30 mm |
1 x | 2 piece mounting frame |
1 x | Propeller electric carbon 8.5x7 |
1 x | PowerBox 12 |
1 x | Cylindergasket DA 170 |
1 x | 42 mm black plastic spinner for fixed propeller |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | PowerBox Signal Amplifier |
1 x | Sukhoi 29S 2,6 m,CF landing gear(SebART) |
2 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Cable coupler M2 (10 uds) |
1 x | BlueCom™ Adapter (iOS) |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Servo HITEC D625 MW |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Crystal RX 35.120 Ch 72 |
1 x | USB Interface Adapter |
1 x | Glases Innovation Plus |
1 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
1 x | Exhaust gasket DA50R DA100 DA200 |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Propeller APC 12x8 SF |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | Black large kwik link (10 pcs) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Xplorer1 anemometro |
1 x | Xplorer2 anemometro |
1 x | 30 cm BEC cable (female) |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | 1/6 Pilot "Garry" |
1 x | Long ball link M3 (6 uds) |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | DPSI V-Match |
![](images/pixel_black.gif) |
233,949.47EUR |