1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
2 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
2 x | Piloto jet 130 mm |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Buy Perforated film 100 cm / 10 m |
2 x | Support pump Xicoy X45 |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Futaba 20 mm servo arm |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
1 x | Axle wheel with accesories |
1 x | 40 mm servo arm with bearing (2 pcs) |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Futaba 38 mm servo arm |
2 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | Metal ring front FEMA |
1 x | Mudguard wheels 112/127 mm |
1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
1 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
1 x | Adapter rotula M3 |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Futaba 30 mm servo rounded arm |
2 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
1 x | 90x60 mm standart servo cover |
1 x | Servo AN-8 HBA |
1 x | Nylon gear block Ø 4 mm (2 uds) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Bearing block for noseleg landing gear |
1 x | Indoor landing gear set |
1 x | Body for landing gear Ø 4 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | 460 mm EPP Floats |
1 x | Check valve quick hose connector 4-4 mm |
1 x | ESC ALPHA 60A HV |
2 x | Servo FUTABA S 3072 HV S-Bus |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Futaba BLS255/272/471SV - Gear Set |
2 x | Nylon threaded block M6 (2 uds) |
1 x | Faucet FESTO |
1 x | Battery charging cable XT60 |
1 x | ANGEL 48" pp orange/black/white |
1 x | ANGEL 48" pp red/blue/white |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | 1/12 Pilot "Langley" |
1 x | 1/6 Pilot "Tony" |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | Pilot "Goose" (Slimline) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | 73x24 mm hard foam KOVO wheel with bearing (2 pcs) |
1 x | 44.5x17 mm (1.75") Type jets aluminium core wheel |
1 x | 300 Newtons FEMA absorber |
1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
1 x | TWIST planeador gomas |
1 x | 120x60 mm SLH KOVO wheel |
1 x | 76 mm light wheels (2 pcs) |
1 x | 63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | 1/4 Pilot "Mike" |
1 x | 1/6 Pilot "Buddy" |
1 x | Support conector MPX (6 pcs) |
1 x | 1/10 Pilot "Jack" |
1 x | Propeller 3x2 |
1 x | 1/12 Pilot "Cougar" |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
2 x | Support XT60 conector (2 pcs) |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Angle support XT60 conector |
1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
1 x | Schul-Malpinsel Gr.5 |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
2 x | Metal gear set for HS85MG/5085MG |
1 x | Racor 2/3 mm |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | Nylon threaded block M4 (2 uds) |
1 x | T-Hose connector 2-2-2 mm |
1 x | Wheel cover holder Ø 4 mm (2 uds) |
1 x | Wheel cover holder Ø 6 mm (2 uds) |
1 x | Metal gear set for HS81MG/5082MG |
1 x | Support Filtro FESTO |
1 x | Red aluminium servo arm V3-Futaba 3,5inch |
1 x | Servo DITEX EL0510M |
2 x | Racor "Y" 3 mm |
1 x | Vertical servo holder |
1 x | Servo Robbe FS 525 BB MG HV |
1 x | Red aluminium servo arm V2-Futaba 2,0 inch |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Red aluminium double servo arm FUTABA 40 mm M3 F3A |
1 x | Servo Mount M (blue) |
1 x | SSPS105 Super Hi-Power servo |
1 x | Programador FUTABA USB CIU-3 |
1 x | Servo Bolt M3x6 (8 pcs) |
1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | 25 mm carbon servo arm |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | TMM 1210-3S heli |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | Servo FUTABA BLS173 SV |
1 x | Tap FESTO 4-4 mm |
1 x | T-Hose connector 3-3-3 mm |
1 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | Racor 3/3 mm |
1 x | Y-Hose connector 6-6-6 mm |
1 x | Racor 4/6 mm |
1 x | Racor 4/4 mm |
1 x | Y-Hose connector 4-4-4mm |
1 x | T-Hose connector 4-4-4mm |
1 x | Nylon gear block Ø 6 mm (2 uds) |
1 x | Quick hose connector 3-3 mm |
1 x | T-Hose connector 3-3-3 mm |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Z-shaped servo mount |
1 x | Wheel cover holder Ø 3 mm (2 uds) |
1 x | Nylon threaded block M5 (2 uds) |
1 x | Wheel cover holder Ø 5 mm (2 uds) |
1 x | Tap FESTO 6-6 mm |
1 x | Racor 4/3 mm |
1 x | Y-Hose connector 3-3-3 mm |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Y-Hose connector 2-2-2 mm |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Quick hose connector 4-4 mm |
1 x | Servo TOPMODEL S7520 MG |
1 x | TMM 2512-3S heli |
1 x | CC 02 |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Fiberglass tube 6/4x1000mm |
1 x | T-Hose connector 6-6-6 mm |
1 x | Cooler motor type 300 |
1 x | Fan for A60 |
1 x | A50 Motor Mount Alu complete set |
1 x | |
1 x | Receiver bed (Blue) |
1 x | Cables suitable for the motor AC 28/7 |
1 x | Size "M" motor holder for class 600 |
1 x | Size "M" motor holder for class 400 |
1 x | Motor mount for 1200 mm models |
1 x | Hacker A30-S Radial Set |
1 x | METEOR 1.000 mm kit |
1 x | Fiberglass motor-holder for electric motors |
1 x | Frontal support Speed 600 |
1 x | Indoor motor holder |
1 x | FesEx-Uni6 System |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | Cooler motor type 400 |
1 x | Frontal support Speed 400/480 |
1 x | Central support Speed 280 |
|
7,254.36EUR |