| 2 x | ABS Strip 1.0x5.0x1000 mm |
| 4 x | ABS Strip 1.5x3.0x1000 mm |
| 2 x | ABS Strip 1.0x3.0x1000 mm |
| 2 x | ABS Strip 1.5x4.0x1000 mm |
| 2 x | Strip ABS 2.0x10.0x1000 mm |
| 2 x | Round Rod 1,0x1000 mm |
| 2 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 2 x | ABS Strip 1.0x2.0x1000 mm |
| 2 x | ABS Strip 1.0x4.0x1000 mm |
| 2 x | ABS I Strip 20x10x1000 mm |
| 1 x | Round Rod 6,0x1000 mm |
| 2 x | Round Rod 3,0x1000 mm |
| 4 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Round Rod 1,5x1000 mm |
| 1 x | Round Rod 1,25x1000 mm |
| 3 x | ABS Strip 1.5x8.0x1000 mm |
| 3 x | Round Rod 2,0x1000 mm |
| 1 x | Round Rod 5,0x1000 mm |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 2 x | Strip 3,5x1,75x330 mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 2 x | ABS Strip 1.5x2.0x1000 mm |
| 2 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | Interface Realflight Simulator |
| 3 x | EasyFLY Addon |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | GameCommander USB Universal |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Ferrita 27x14x7 mm |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 2 x | 140 mm rods + T patellas set for direction control |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 2 x | Cable grommet 9.5 mm (4 uds) |
| 2 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Allen wheel collar M4x6 |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | 100 mm rods set for direction control |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 2 x | Allen wheel collar M4x4 |
| 2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 2 x | 250 mm / 16 mm Airbrakes |
| 1 x | Clip fixing for wing (2 pcs) |
| 1 x | 80 mm rods set for direction control |
| 1 x | 45 mm rods + T patellas set for direction control |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 2 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 3 x | Allen wheel collar M3x3 |
| 1 x | Pilot "Dick" Legends Series (Slimline) |
| 1 x | Pilot "Anthony" (Slimline) |
| 1 x | Conector BEC male (10 pcs) |
| 1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
| 1 x | Connectors banna oro 4 mm (M/F) |
| 2 x | Pilot JAN 1/4 Saiplanes |
| 1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | 1/12 Pilot "Fighter" |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 1 x | 1/12 Pilot "Tom" |
| 1 x | Conector FUTABA Servo female (10 pcs) |
| 1 x | Conector JR Servo male (50 pcs) |
| 2 x | Conector MR-60 (pareja) |
| 1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 1 x | 1/10 Pilot "Jack" |
| 2 x | Piloto Jet "Red" 1/6 Scale |
| 1 x | Connector CAN 15 |
| 1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
| 2 x | Conector FUTABA Servo male (10 pcs) |
| 1 x | Bag connector 2 mm |
| 1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
| 2 x | Conector JR Servo male (10 pcs) |
| 1 x | Conector JR Servo male (10 pcs) |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | Conector XT-150 6mm (Set: 5 pares) |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
| 1 x | Horn 6/27 with M3 Bearing |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Towing hook |
| 1 x | Motor DLE 200cc Std |
| 2 x | ABS I Strip 10x5x1000 mm |
| 1 x | Set Altimeter SHRead |
| 2 x | Canopy Latch |
| 1 x | Piloto JET 1:3,5 |
| 1 x | Connectors MPX male (PIN double) |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | 290x4 mm M4 shaft ship |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Snap short M2 (10 uds) |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Ignition for DA-50-R, DA-60, DA-85 |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | Stainless steel flange for VM 60/70/120/140 |
| 1 x | Motor Moki S 300 cc 5 cylinders |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Reed valve for DA-60/70 |
| 1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
| 1 x | Engine Kolm BX-155-2 with starter |
| 1 x | Wing bolts M6 Steel screw Red (2 pcs) |
| 2 x | Split M1,2x10 (10 pcs) |
| 1 x | Wheel collar 6 mm Ø (4 uds) |
| 1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
| 1 x | Dia. 20x15 mm teflon tube for escape |
| 1 x | DLE 30 complete electronic ignition |
| 1 x | 5 mm gas motor standoff |
| 1 x | Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece |
| 1 x | Captador RCEXL para DA |
| 1 x | Carb Carrier, red DA-85, DA-100L and DA-120 |
| 1 x | Piston ring for DA-85 and DA-170 |
| 1 x | Snap pin for micro clevis (10 uds) |
| 1 x | Ball bearing 6203 DLE |
| 1 x | 10 mm gas motor standoff |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Canister combo DLE 111 cc |
| 1 x | 45 mm gas motor standoff |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
| 1 x | |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Black silicone 0,25 mm² wire (25 m) |
| 1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
| 1 x | DLE 111 Old Crankshaft keyway |
| 1 x | Carburator Moki S250 |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 1 x | Cylinder for DA-85/170 (1 piece) |
| 1 x | Exhaust pipe BX 155 Right |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | 110 degree stainless steel bend D=18mm, widened to 20mm |
| 1 x | Pushrod octagone 4/3 |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Baffles for Radial Moki S250/330 mm |
| 1 x | Canister combo DLE 170 cc |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Moki Exhaust Bend 50VT |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Lead with adhesive (2 pcs) |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | DLE-55RA Ignition unit |
| 1 x | Baffles for Radial Moki S180/320 mm |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Reed valve Retainer, black rubber for DA-85, DA-100L and DA-120 |
| 1 x | Motor Moki S 250 cc 5 cyl with autostarter |
| 1 x | COMFORT MOUNT ø 55 mm |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Ball bearing 6002 DLE |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 1 x | Canister combo DLE 55 cc |
| 1 x | Wing bolts M3 Steel screw blue (2 pcs) |
| 1 x | 10 mm gas motor standoff |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | XH male balance (8S) connector (2 pcs) |
| 1 x | Connectors MPX female (PIN double) |
| 1 x | Pilot "Adolf" Legends Series (Slimline) |
| 1 x | MPX PCB "4 Pins", 5 pieces |
| 1 x | XH male balance (9S) connector (2 pcs) |
| 1 x | Conector XT-30 (hembra) |
 |
| 20,585.83EUR |
