| 1 x | Propeller diller for EME35 and DLE35 |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Dremel 3000 130W |
| 1 x | Dean-T Plug Mold |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | Cut tube |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | Digital scale up to 40 kg |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Digital weight, angle and balance meter BASIC |
| 1 x | EC-Cutter |
| 1 x | 55% silver electrodes (2 pcs) |
| 1 x | Concave-Convex sandpaper file 13 mm |
| 2 x | |
| 3 x | Ball Link Plier |
| 1 x | 2,0x50 mm allen screwdriver |
| 2 x | 100g Flux Paste for Silver Solder |
| 2 x | Dremel PERMAGRIT thin lime |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Copier 2x20 cm pcs |
| 2 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
| 2 x | |
| 1 x | 22 mm Cut Disc Proxxon/Dremmel |
| 2 x | Dust collector for mould cleaning |
| 2 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 1 x | Fresa corte diamante Ø 2.35mm (lentil) |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | USB Mini Camera endoscope |
| 1 x | CM-3 |
| 1 x | CC 01 |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Propeller APC 14x8.5 Electric Pusher |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | DPSI magnetic switch actuator (housing) |
| 2 x | Connector CAN 15 |
| 2 x | Allen wheel collar M3x5 |
| 2 x | Clip fixing for wing (2 pcs) |
| 1 x | 100 mm rods set for direction control |
| 2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 2 x | Allen wheel collar M3x3 |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | Allen wheel collar M4x6 |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 2 x | 250 mm / 16 mm Airbrakes |
| 1 x | 80 mm rods set for direction control |
| 1 x | 140 mm rods set for direction control |
| 2 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 2 x | 45 mm rods set for direction control |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
| 1 x | Tool for entel |
| 1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
| 1 x | Z Bender - S Type Tool |
| 2 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
| 2 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Tachometer HANGAR 9 digital |
| 2 x | Z Bender - S Type Tool |
| 1 x | Sealing Iron Profi LCD |
| 2 x | Smart Soldering Iron 110W/230V AC |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 2 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 3 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Sub-D Plug Mold |
| 1 x | LUCAS pilot ARTF |
| 1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Piloto Jet "Red" 1/6 Scale |
| 1 x | Glases Innovation Plus |
| 1 x | Nut M2 |
| 1 x | Extra Hard Titanium Herxagon Screwdrivers |
| 2 x | Digital precision scale up to 2000 g |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Oils Pumps Empty (1 liter) |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Support pump Xicoy X45 |
| 2 x | Ventus 1:4 set of instruments |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 2 x | Dremel PERMAGRIT 18 mm round lime |
| 2 x | Tachometer Hyperion Multi-pala |
| 1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
| 1 x | SPARK Switch 5.9v |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Oracover light Grey 2m |
| 2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
| 1 x | Female connector for 20 pines AWG |
| 1 x | Cabling for Fox MDM1 wings |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | PWC4 wing/fuselage connector for 4 servos |
| 1 x | JETImodel SINGLE BEC |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | CC 05 |
| 1 x | Female connector for 16 pines AWG |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Male connector for 12 pines AWG |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | BEC 3A FOXY |
| 1 x | Micro Switch button |
| 2 x | Male connector for 6 pines AWG |
| 1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
| 1 x | Servo Fork |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Blade Holder Full (3 blades) |
| 1 x | Blade Holder (3 blades) |
| 1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
| 1 x | 45 mm rods + T patellas set for direction control |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
| 1 x | Wing bolts M3 Steel screw blue (2 pcs) |
| 1 x | Propeller diller for DA50, DLE55 red |
| 1 x | Welder 100W/200V |
| 1 x | 25 mm Sandpaper file |
| 1 x | Universal Filter |
| 1 x | Heli digital angle measurer |
| 1 x | Fresa corte diamante Ø 2.3mm (bola) |
| 1 x | Goma arrancador Ø36 mm x 30 mm |
| 1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
| 1 x | Blue "FUEL VENT" round aluminum overflow socket |
| 1 x | Spinner 102 mm |
| 1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
| 1 x | 75 mm spinner (Carbon Imitation) |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 2 x | Connectors MPX female |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 2 x | Spinner 125 mm GFK |
| 2 x | Spinner 159x200 mm GFK |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | 70 mm aluminium spinner. |
| 2 x | 89 mm aluminium spinner. |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Spinner 105 mm CFK |
| 1 x | Rocket cardboard tube 50mm x 48mm x 250mm |
| 1 x | Spinner 115 mm GFK |
| 1 x | JETCENTRAL ECU LIFE BATTERY 3800 MAH |
| 1 x | Electric starter BEE (old) |
| 2 x | Power Pack SE Series JETCENTRAL |
| 1 x | HDT Jet Central |
| 1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
| 1 x | DOMINO 46-55 Trainer 1583 mm |
| 1 x | PowerBox SparkSwitch RS |
| 1 x | Multi-adapter balancer JST - TP |
| 1 x | SBEC 30 D |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | AXI 2826/10 V2 |
| 1 x | Motor A60-7XS V4 28-pole kv330 |
| 1 x | Motor Mega AC 16/07/12 |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 1 x | Baseplate servo |
| 1 x | |
| 1 x | Female connector for 6 pines AWG |
| 1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
| 1 x | PSC 5 |
| 1 x | Electronic switch JETI SP6 0-15v/6A |
| 1 x | Long Switch On/Off micro |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Interruptor RX/Batterie |
| 1 x | Circlick securite |
| 1 x | Multi-adapter balancer JST/C - TP |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | AXI 2826/12 V2 Long |
| 1 x | AXI 2814/6D V2 |
| 1 x | AXI 2808/24 V2 |
| 1 x | AXI 2217/20 V2 |
| 1 x | AXI 2808/16 V2 Long |
| 1 x | Motor B40-10 L |
| 1 x | Ø 38 mm fiberglass motor-holder for electric motors |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | Motor A50-16 S V4 |
| 1 x | Motor A200-8 |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Mega Motor RC 400 F5J 1950KV |
| 1 x | Motor Mega AC 16/30/01 |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 1 x | Snap short M2 (10 uds) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Window mounting channel 5m |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Motor Mega AC 16/15/07 COMBAT |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 1 x | Motor Mega AC 22/30/03 |
| 1 x | Motor Mega AC 16/25/04 COMBAT |
| 1 x | 152x46 Ø6.0 mm aluminium core wheel |
| 1 x | 18m Fitting barb |
| 1 x | 1/6 Pilot "Garry" |
| 1 x | "Taxi Tank" Fuel Tank |
| 1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
| 1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
| 1 x | Spinner propeller pleg. 30mm axle 3,0 mm |
| 1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
| 1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
| 1 x | Z Spinner (CN) 35mm |
| 1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
| 1 x | Spinner propeller pleg. 38 mm / 3,17 mm |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Cockpit aluminium closing 5.4g |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Carburator Moki S 180 |
| 1 x | Carbon plate 550x350x1.0 mm ECOTECH |
| 1 x | Carbon plate 350x150x4.0 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Cockpit aluminium closing 4.7g |
| 2 x | Balsa panel 4.0x100x1000 mm |
| 1 x | Carbon plate 350x150x1.5 mm |
| 2 x | BALSA trip 10x10x1000 mm |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 2 x | Conector XT-150 6mm (Set: 5 pares) |
| 1 x | 95 mm aluminium spinner. |
| 1 x | Rocket D9-7 |
| 1 x | Remote electric ignition system |
| 1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
| 1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
| 1 x | Motor A2212/13T |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | 100x50 mm SLH KOVO wheel |
| 1 x | 1/4 Pilot "Mike" |
| 1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
| 1 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
| 1 x | Spinner propeller pleg. 40 mm / 6 mm |
| 1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
| 1 x | Z Spinner (CN) 38mm |
| 1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
| 1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 2 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Carbon plate 550x350x3.0 mm ECOTECH |
| 1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
| 1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Combo RAY C3542-1000 + ESC 60A |
| 1 x | Spinner 90 mm GFK |
| 1 x | 57 mm aluminium spinner. |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Connectors DEANS (T) micro |
| 1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
| 1 x | Spinner Alumin. propeller pleg. 30 mm / 4,0 mm |
| 1 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
| 1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
| 1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | 1/10 Pilot "Jack" |
| 1 x | 20 mm carbon horn |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | 1/6 Pilot "John" |
| 1 x | 22m Fitting barb |
| 1 x | 1/12 Pilot "Cougar" |
| 1 x | 1000 cc gasoline fuel tank complet |
| 1 x | 1/6 Pilot "Cindy" |
| 1 x | 160 mm carbon undercarriage (2pcs) |
| 1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
| 1 x | Spinner fold propeller 50 mm (white spare spinner) |
| 1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
| 1 x | Spinner fold propeller 38 mm (white spare spinner) |
| 1 x | Spinner propeller pleg. 30 mm / 3,17 mm |
| 1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
| 1 x | Spinner propeller pleg. 28 mm/5,0 mm |
| 1 x | Spinner propeller pleg. 40 mm / 4 mm |
| 1 x | Spinner Alumin. propeller pleg. 40 mm / 5,0 mm |
| 1 x | Spinner propeller pleg. 40 mm / 3,17 mm |
| 1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
| 1 x | White spinner propeller pleg. 42 mm / 5 mm |
| 1 x | Spinner propeller pleg. 48 mm / 6,0 mm |
| 1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
| 1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
| 1 x | Spinner propeller pleg. 38 mm/6,0 mm/5º |
| 1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
| 1 x | Spinner fold propeller 50-55 mm (white spare spinner) |
| 1 x | Spinner propeller pleg. 38 mm / 6,0 mm |
| 1 x | Prop rubber XS set 4 pieces |
| 1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Carbon plate 350x150x2.5 mm |
| 1 x | Carbon plate 550x350x4.0 mm ECOTECH |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Bags wings/rudder ASPIRE |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Carbon plate 350x150x2.0 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Carbon plate 350x150x0.5 mm |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | Battery Protection Circuit Board 22.2v 6s |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | Carburator Moki S400 |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | Carbon plate 500x400x2.0 mm ISOTECH |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Bags MB-339 (Wings & Elevators) |
| 1 x | Combo FOXY C3530-700 + FOXY 80 amp |
| 1 x | BALSA triangular 10x10x1000 mm |
 |
| 14,093.40EUR |
