| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 2 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | One touch canopy lock |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | CC 01 |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | JETImodel SINGLE BEC |
| 1 x | CC 03 |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | 30 cm BEC cable (female) |
| 1 x | CM-3 |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | TrainerCord (master-learner) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | CC 02 |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | USB HLS prog. interface |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Circlick securite |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 2 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | Starter Sullivan-STAR 601 |
| 2 x | 2,5x60 mm allen screwdriver |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Crimping tool |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Vacuum pump P1-N |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 2 x | Copier 2x20 cm pcs |
| 1 x | Hot Glue Stick RED |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Ball Link Plier |
| 1 x | Dust collector for mould cleaning |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 2 x | Hot Glue Stick GREEN |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Hot Glue Stick BLACK |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Z Bender - S Type Tool |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | Copier 5x20 cm pcs |
| 2 x | Z Bender - S Type Tool |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Absorver mount set for 5-10 Kg models |
| 1 x | 150 Newtons FEMA absorber |
| 1 x | 100 Newtons FEMA absorber |
| 1 x | Wheel FEMA 127 mm / 6 mm |
| 1 x | 127x43 Ø6.0 mm aluminium core wheel |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Cable set PREMIUM , fuselage/wing one4one |
| 1 x | Motor DLE 200cc Premium Muffler |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | DPSI RV Mini 6 Magic |
| 1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
| 1 x | 12 mm dogdrive props |
| 2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 2 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | |
| 2 x | BALSA triangular 6x6x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | 102 mm aluminium spinner |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | 200 mm extensión servo HITEC/JR |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | 10 mm gas motor standoff |
| 1 x | 1/6 Pilot "Garry" |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | 120x60 mm C SLH KOVO wheel |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | 152x46 Ø6.0 mm aluminium core wheel |
| 1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
| 1 x | 22m Fitting barb |
| 1 x | |
| 1 x | 102x26 Ø6.0 mm aluminium core wheel |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 2 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Pushrod octagone 4/3 |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
| 2 x | Pushrod octagone 3/2 |
| 1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
| 1 x | SERVO HOLDER |
| 1 x | Tow hook for tug |
| 1 x | Towing hook <3m |
| 1 x | Katana Mini carbon wheel pants (2 pcs) |
| 1 x | Power MULTIlight |
| 1 x | |
| 1 x | DPSI Micro - RCS |
| 1 x | DPSI Micro MPS |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Fully Threaded Steel Rod M3 |
| 1 x | Pushrod greyline 3/2 with coupler M2 |
| 2 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Motor OS 3820-1200 electric |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
| 2 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
| 1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
| 1 x | Tool for entel |
| 1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Sealing Iron Sleeve STD |
| 1 x | Mold plugs XT-30 |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | Profile ABS half cane 7.0x1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Goma arrancador Ø36 mm x 30 mm |
| 1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
| 1 x | Steel brush wheel with 2.35mm |
| 1 x | Profile ABS half cane 4x1000 mm |
| 1 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
| 1 x | Precision wrench L100 mm |
| 1 x | Mini-handed clamp |
| 1 x | Support XT60 conector (2 pcs) |
| 1 x | Support Filtro FESTO |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | Support Pitot JETI |
| 1 x | PowerBox Sensor V3 MPX/Jr |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Bungee HLG Premium |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
| 1 x | Combo FOXY C3530-570 + FOXY 80 amp |
 |
| 8,723.38EUR |
