| 1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
| 1 x | SAVOX SH 0254 servo |
| 1 x | Vasa model Catapult |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | 25 mm reinforced hinge |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 2 x | Gates hinge |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Cockpit plastic closing |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | One touch canopy lock |
| 1 x | Alu servo arm double RHINO |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Servo RHINO pro SHV digi 4 |
| 1 x | 18 mm reinforced hinge |
| 1 x | Covered closure or fairings |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 2 x | Screw-lock connector M2 (2 uds) |
| 2 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 2 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Glases Ace |
| 1 x | Glases Innovation Plus |
| 1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
| 1 x | Glases Aspen |
| 2 x | Servo AN-20 MGBBA |
| 2 x | Ventus 1:4 set of instruments |
| 2 x | 57 mm micro-mini servo cover |
| 2 x | 58 mm micro servo cover |
| 1 x | Servo TOPMODEL STANDARD S3217 |
| 2 x | 90x60 mm standart servo cover |
| 1 x | 90x75 mm standart servo cover |
| 2 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
| 2 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
| 1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
| 1 x | SERVO DES 568 MG |
| 2 x | Servo DITEX TD2612S |
| 1 x | 46 mm Futaba servo arm tandem with ball link |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 2 x | Blades 330mm |
| 1 x | Small pinned hinge (6 uds) |
| 1 x | Canopy Latch |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | Allen wheel collar M4x4 |
| 1 x | 3 blades set |
| 1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
| 1 x | Blade holder center GFK 0,5 mm |
| 2 x | Nut M1,6 |
| 1 x | Washer 2.2×4 |
| 1 x | Clip mini fixing for wing (2 pcs) |
| 1 x | Tail boom |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Tail tube RAINBOW |
| 1 x | Wheel keeper washer |
| 1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
| 2 x | Servo Fork |
| 2 x | Head lower part |
| 2 x | Propeller POWER-PROP 7x7 |
| 1 x | ALU double servo arm 3 mm shaft |
| 1 x | Glases Nimbus "Black" |
| 1 x | ESC ALPHA 60A HV |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | 50x45 mm micro-mini servo cover |
| 1 x | HBC 10035-3 32-Bit |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Keypad ALTIS V4 |
| 1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
| 1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
| 1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
| 1 x | aluminium servo arm V2-JR 2,0 inch M3 |
| 1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
| 1 x | Gracia Maxi ARF (Top Model) |
| 1 x | FA27.2×8.9 Prop-2PCS/PAIR |
| 1 x | aluminium servo arm V1-JR 1,0 inch M2 |
| 1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
| 1 x | Micro Tarjeta SD Rapid Rush 16 GB |
| 1 x | Cable video GoPro |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
| 1 x | Paint gun for sprays |
| 1 x | 1,2x1000 mm 2:1 red termoretract tube |
| 1 x | Oracover CHROME 2m |
| 1 x | Gracia Maxi ARF, bags (Top Model) |
| 1 x | Gracia (Top Model) |
| 1 x | Q-12 2000 mm Electric |
| 1 x | GRAFAS MAXI ARF |
| 1 x | TAKEO 3.6m electric |
| 1 x | MAMBO 17 |
| 1 x | Ball link M3 (10 pcs, flat ball) |
| 1 x | Baering 3x8x4 |
| 1 x | Futaba 54 mm servo arm with ball link |
| 1 x | Cable coupler M2x66 (2 uds) |
| 1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
| 1 x | FUTABA 20 mm servo arm with ball link |
| 1 x | Futaba 30 mm servo rounded arm |
| 1 x | Futaba 46 mm servo arm with ball link |
| 1 x | Autogyro Cierva C30 Spain |
| 1 x | Cierva C30 simulated motor |
| 1 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | Balls 4 mm |
| 1 x | Raer wall |
| 1 x | Blade holder center |
| 1 x | Screws M1,6x6 Allen |
| 1 x | Propeller POWER-PROP 10x7 Izda |
| 1 x | Propeller POWER-PROP 12x6 |
| 1 x | Propeller POWER-PROP 13x8 |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Porpeller HUNTER 480 |
| 1 x | 6x4 tree blades propeller |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Xplorer4 anemometro |
| 1 x | Z Bender - S Type Tool |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | Aceite DELUXE turbine Jet Oil 1 litro |
| 1 x | Oil FUCHS 1 liter |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
 |
| 7,325.72EUR |
