| 2 x | Carbon fiber rod 7.0 mmx1000 mm |
| 2 x | Carbon fiber rod 6.0 mmx1000 mm |
| 4 x | Carbon fiber rod 0.5 mmx1000 mm |
| 2 x | Carbon fiber rod 8.0 mmx1000 mm |
| 3 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 3 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 2 x | Carbon fiber rod 2.5 mmx1000 mm |
| 2 x | Carbon fiber rod 14 mmx1000 mm |
| 2 x | Carbon fiber rod 12 mm x 1000 mm |
| 2 x | Carbon fiber rod 5.0 mmx1000 mm |
| 3 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Xplorer1 anemometro |
| 1 x | Xplorer2 anemometro |
| 1 x | Xplorer3 anemometro |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 4 x | Pine wood slat 3.0x5.0x1000 mm |
| 2 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 3 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 2 x | BALSA triangular 6x6x1000 mm |
| 2 x | BALSA trip 3.0x5.0x1000 mm |
| 2 x | Beech dowels 3.0 x 1000 mm |
| 2 x | BALSA triangular 8x8x1000 mm |
| 3 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 2 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 3 x | Beech dowels 4.0 x 1000 mm |
| 2 x | BALSA trip 5.0x5.0x1000 mm |
| 2 x | Pine wood slat 10x10x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 2 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 3 x | 3 LiPo XH>EH adapter |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | Rescue 1,8m2 / BackPack |
| 1 x | Electromotor starter EME 35cc |
| 1 x | Ignition bed V2 Red color |
| 1 x | SAITO FG-36 carburetor |
| 1 x | Deposito DUBRO 3000cc-100oz |
| 3 x | Suction funnel for carburetor 90D-L (red) |
| 1 x | Deposito SECRAFT V2 1000 ml Gas |
| 2 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
| 1 x | Electron 22 mm Fitting barb |
| 1 x | Deposito combustible tipo "turbina" 330 ml |
| 1 x | 1000 ccm gasoline fuel tank |
| 1 x | Deposito DUBRO 1800cc-60oz |
| 1 x | 280 cc gasoline fuel tank complet |
| 1 x | Black "FUEL VENT" round aluminum overflow socket |
| 4 x | Hose clips 6 mm |
| 1 x | Propadapter for motor A50-V3 |
| 2 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Sun Cover PC 21 XXL (JMB Jets) |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 3 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Support pump Xicoy X45 |
| 2 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 2 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 2 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 2 x | BALSA triangular 10x10x1000 mm |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 3 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | FESTO connector M7 Quick 4mm 90º |
| 1 x | Extension Arm for Carburetor (red) |
| 2 x | Hose stopper 4 mm |
| 2 x | Pendulum glow tank |
| 1 x | Fuel Fittings-Blue |
| 1 x | diameter silicone tube for glow |
| 1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
| 1 x | Fuel line plugs (Red) |
| 2 x | Quick hose connector 4-4 mm |
| 1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
| 2 x | Precission dot for SAITO FA65/72/80/91S/100/120S/150S/180 |
| 1 x | FESTO connector M5 Quick 4 mm |
| 2 x | Tube mounting clamps |
| 1 x | Fuel line plug Large 2 pcs |
| 1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
| 1 x | Fuel line plugs (Black) |
| 2 x | Hose clamps 0.16-0.20in, (4 pieces) |
| 1 x | FESTO Blanking plug G1/8 |
| 1 x | Reed valve for DA 50-R |
| 1 x | Tubo silicona transparente 3.5 x 2 mm (1m) |
| 1 x | Fuel Fittings-Gold |
| 2 x | Walbro carburetor for MVVS 26/30/35/40 cc |
| 2 x | Tube mounting clips (5 pcs) |
| 1 x | FESTO connector M7 Quick 4 mm |
| 1 x | FESTO connector M7 barb fitting 6mm |
| 2 x | DA 85 / DA 100 / DA 100 L carburetor |
| 2 x | Suction funnel for carburetor 90D-M (red) |
| 2 x | Simple take for fuel tank |
| 2 x | GLOW 2C + accesories |
| 2 x | Tubo silicona transparente 7 x 3 mm (1m) |
| 2 x | Tube holder |
| 2 x | Gas combustible tube |
| 1 x | FESTO Polyurethan tube for turbine 6x4x1000 mm (transparent) |
| 1 x | Variable Flow Smoke Pump System |
| 1 x | PowerBox Smokepump JETs 2x outside |
| 2 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
| 1 x | FOX 3000 mm, Fuselage (FMS) |
| 1 x | 4,8x1000 mm 2:1 black termoretract tube |
| 1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | 1,6x1000 mm 2:1 black termoretract tube |
| 1 x | 4,8x1000 mm 2:1 red termoretract tube |
| 1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 1 x | Carburetor DLE 20 |
| 1 x | DLE 55-RA Muffler |
| 1 x | Canister combo DLE 170 cc |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 2 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | DUPLEX 2,4GHz MRPM EX |
| 1 x | DUPLEX 2.4EX MFlow2 Gas 800 |
| 1 x | DUPLEX 2.4EX MULi 6s M |
| 1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
| 1 x | Battery RX JETI LiIon RB 3100 7.2v |
| 1 x | Connectors MPX male |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | 6,4x1000 mm 2:1 green termoretract tube |
| 1 x | 19 mm 2:1 black termoretract tube |
| 1 x | 30 cm BEC cable (male) |
| 1 x | 3,2x1000 mm 2:1 red termoretract tube |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | 12.7 mm 2:1 black termoretract tube |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | 2,4x1000 mm 2:1 green termoretract tube |
| 1 x | 6,4x1000 mm 2:1 black termoretract tube |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Piston ring for DLE-30 |
| 1 x | Sensor Ignition DLE 20/20RA/30/35RA/55/55RA |
| 1 x | Small Crow DLE-170M |
| 1 x | Canister combo DLE 120 cc |
| 1 x | Escape DLE-60 Dcha |
| 1 x | Muffler DLE 20 |
| 1 x | DLE 85/111/120 Crankshaft keyway |
| 1 x | Canister combo DLE 111 cc |
| 1 x | Cilinder DLE 30 - DLE 60 |
| 1 x | DLE Ignition 111/120/170 |
| 1 x | Canister combo DLE 55 cc |
| 1 x | CENTRAL PROPELLER BOLT FOR DLE85/111/120 |
| 1 x | DLE-55RA Ignition unit |
| 1 x | Canister combo DLE 120 cc |
| 1 x | CILINDER FOR DLE55, DLE111, DLE222 |
| 1 x | DLE 55 Muffler |
| 1 x | DLE Ignition 170M |
| 1 x | DLE 111 Old Crankshaft keyway |
| 1 x | Muffler DLE 20-RA |
| 1 x | Big Crow DLE-170M |
| 1 x | Piston ring for DLE-20 RA |
| 1 x | Muffler DLE-120 Right |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | DSM 10 Dual Switch Mixer |
| 1 x | Bujia OS G5 gasolina |
| 1 x | Fuel Station 30L |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | T- Fittings red color (2pcs) |
| 1 x | Tank gas KUZA 260 cc |
| 1 x | HOPPER tank INTAIRCO iTrap 30 PRO 3x FESTO 4mm 90º |
| 1 x | FuelTank Cap (blue) |
| 1 x | Intairco CMB Super Filter - 4mm Barb |
| 1 x | 550 cc gasoline fuel tank complet |
| 2 x | Extra hard 1500 ccm complete gasoline fuel tank |
| 1 x | Axle for motor A20-S (3 uds) |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Tygon tube 4.8 x 3.2 mm 15 m |
| 1 x | T- Fittings blue color (2pcs) |
| 1 x | Restrictor FESTO 3/3 mm |
| 1 x | Refueling Cup V2 Red |
| 1 x | Tygon tube 6.35 - 3.18 mm 1m |
| 1 x | Hopper UAT Sebar 600 ml |
| 1 x | Tygon tube 4.8 x 3.2 mm 1m |
| 1 x | Hopper 125 ml XICOY |
| 1 x | HOPPER tank INTAIRCO iTrap 50 175 ml 3x racor 6mm CLASSIC PRO |
| 1 x | HOPPER tank INTAIRCO iTrap 40 95 ml 3x racor 4mm CLASSIC PRO |
| 1 x | Extra hard 250 ccm complete gasoline fuel tank |
| 2 x | T-Hose connector 3-3-3 mm |
| 1 x | |
| 1 x | 1000 ccm complete gasoline fuel tank |
| 1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
| 1 x | ITRAP 50 (175ML) CLASSIC PRO, COMPRESSION BARB FITTINGS - SUIT X |
| 1 x | Fuel tank grommet |
| 1 x | HOPPER tank INTAIRCO iTrap 60 250ml 3x FESTO 90º 6mm CLASSIC PRO |
| 1 x | HOPPER tank INTAIRCO iTrap 60 250ml 3x racor 6mm CLASSIC PRO |
| 1 x | Refueling Cap V3 Black |
| 1 x | Hopper UAT Sebar 400 ml |
| 1 x | HOPPER tank INTAIRCO iTrap 40 95 ml 3x racor 6mm CLASSIC PRO |
| 1 x | Quick hose connector 6-6 mm |
| 1 x | HOPPER tank Digitech 100 ml |
| 1 x | Hopper 125 ml INTAIRCO |
| 1 x | Refueling Cap V3 (RED) |
| 1 x | Fuel tank 500ml (17oz) |
| 1 x | ITRAP 40 (95ML) CLASSIC PRO, FESTO 4MM QS ELBOW CONNECTIONS |
| 1 x | HOPPER tank INTAIRCO iTrap 30 PRO 3x FESTO 4mm |
| 1 x | ITRAP 40 (95ML) CLASSIC PRO, FESTO 4MM QS CONNECTIONS |
| 1 x | Quick hose connector 6-4 mm |
| 1 x | HOPPER tank Digitech 250 ml (Festo nipples 6 mm) |
| 1 x | Refueling Cup V2 Blue |
| 1 x | Smoke Dot (Red) |
| 1 x | Gas, Smoke Fluid or Kerosene Refueling Dry-Break Ports w/Return |
| 1 x | KWIKFILL FUELING VALVE GLOW |
| 1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
| 1 x | Gas or Kerosene Refueling Dry-Break Ports w/Return Line |
| 1 x | Fueling valve "Air" |
| 1 x | Kerosene valve EVO Jet |
| 1 x | FuelTank Cap (red) |
| 1 x | Neoprene tube 7,5x3,5 mm (1 m) |
| 1 x | Fuel Station 20L |
| 1 x | Tygon tube 9.53 x 6.35 mm 15 m |
| 1 x | Fuel tank fiberglass Easy Jet 2,2 l |
| 1 x | Refueling Cap V3 Red |
| 1 x | SINGLE FUELING VALVE GASOLINE MK2 SMALL |
| 1 x | EME 55 cc carburetor WALBRO |
 |
| 9,846.34EUR |
![ER-40eVo Set A [2x ER40 + RB-45]](images/ER160.jpg "ER-40eVo Set A [2x ER40 + RB-45]")
![ER-40eVo Set B [Complet Set + GS200]](images/er40gs200.jpg "ER-40eVo Set B [Complet Set + GS200]")
![ER-50eVo Set A [2x ER50 + RB-45]](images/50_A_RB-e1481338435888.jpg "ER-50eVo Set A [2x ER50 + RB-45]")
