| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 2 x | Cockpit plastic closing |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | One touch canopy lock |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Canopy Latch |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | 15 mm reinforced hinge |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | CC 01 |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Circlick securite |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | CC 03 |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 2 x | CC 02 |
| 3 x | CC 05 |
| 1 x | Adapter lead MPX/EC3 |
| 2 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 2 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 2 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 1 x | Couple M4 for wire (10 pcs) |
| 2 x | Angled clevis with threaded rod M3 |
| 2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 2 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | Spikes Band (5 m) |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | SlowFlyer control horn (3 pcs) |
| 1 x | Small aluminium horn red (2pcs) |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 2 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
| 2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 1 x | Support pumb/filter Xicoy X45 |
| 1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
| 1 x | Cockpit aluminium closing |
| 1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Kwik link with arm M5xM2,5xL30 |
| 1 x | Pulley brass 10/2 (2 pcs) |
| 1 x | Kwik link with arm M3xM2xL24 |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 1 x | Female connector for 6 pines AWG |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 2 x | FX three-position switched channel, long |
| 1 x | SPARK Switch 7.4v |
| 2 x | Connector CAN 15 |
| 1 x | Female connector for 20 pines AWG |
| 1 x | Filler Gauges |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Selfstart electronic switch |
| 1 x | Male connector for 10 pines AWG |
| 1 x | Male connector for 6 pines AWG |
| 1 x | Interruptor RX/Batterie |
| 1 x | EWC3 100 cm wing connector |
| 1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Metal ring front FEMA |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
| 1 x | Nylon gear block Ø 3 mm (2 uds) |
| 1 x | Mudguard wheels 112/127 mm |
| 1 x | Tren de cola carbono 50-70cc |
| 2 x | Z type of cable coupler Ø 1 (2 uds) |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
| 1 x | Pulley brass 2,5/1 (2 pcs) |
| 1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
| 1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
| 1 x | Propadapter for motor A60-V2 |
| 1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
| 1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
| 1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Blade holder metal LAMA |
| 1 x | |
| 1 x | BETA 1400 ARF Red |
| 1 x | Ciano KAVAN Medium 20g |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Cable coupler M2 (10 uds) |
| 1 x | Ciano KAVAN Super Thin 20g |
| 1 x | 45 mm aluminium spinner (Kavan) |
| 1 x | Crawler GRE-24 RTR 1:24 Arena |
| 1 x | Conector MR-60 (pareja) |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Debonder CA 20g |
| 1 x | Xplorer1 anemometro |
| 1 x | Xplorer3 anemometro |
| 1 x | Short Switch On/Off micro |
| 1 x | Female connector for 10 pines AWG |
| 1 x | Micro Switch button |
| 1 x | Futaba 54 mm servo arm with ball link |
| 1 x | Horizontal mounting servo holder |
| 1 x | Prolonguer for Balancer Thunder Power 6S |
| 1 x | USB interface ALTIS |
| 1 x | Body for landing gear Ø 4 mm |
| 1 x | Nylon threaded block M4 (2 uds) |
| 1 x | Dummy motor GPW Wasp Scale 1/4 |
| 1 x | |
| 1 x | 60 mm aluminium spinner (Kavan) |
| 1 x | Battery LiPo GRE18 600 mAh 7.4v |
| 1 x | 50 mm aluminium spinner (Kavan) |
| 1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Ball Bearing Oil 25 ml |
| 1 x | 10 mm aluminium spinner (Kavan) |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | 25 mm Sandpaper file |
| 1 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
| 1 x | Charger SKY RC e680 |
| 1 x | 55 mm aluminium spinner (Kavan) |
| 1 x | BETA 1400 RTF Red |
| 1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
| 1 x | Ciano KAVAN Thin 20g |
| 1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
| 1 x | Adaptadores carga 6s JST-XH |
| 1 x | Conector MT-60 (pair) |
| 1 x | Concave-Convex sandpaper file 13 mm |
| 1 x | Ciano KAVAN Thick 20g |
| 1 x | Spinner plastic black fixed propeller 30 mm |
| 1 x | 36 mm black plastic spinner for fixed propeller |
| 1 x | Spinner plastic white fixed propeller 42 mm |
| 1 x | EWC6 40 cm wing connector |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | SPARK Switch 12v |
| 1 x | Futaba 52 mm servo arm |
| 1 x | 5 mm M2 variable horn |
| 1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
| 1 x | XTorque CFK Servohebel 38 HITEC 25T |
| 1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
| 1 x | Futaba 30 mm servo rounded arm |
| 1 x | HITEC 20 mm servo arm with ball link |
| 1 x | Futaba 20 mm servo arm |
| 1 x | Hitec 25 mm servo arm with ball link |
| 1 x | 17 mm servo arm with ball link DES Graupner |
| 1 x | Futaba 38 mm servo arm with ball link |
| 1 x | XTorque CFK Servohebel 38 |
| 1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
| 1 x | Futaba 38 mm servo arm |
| 1 x | Futaba 2x20 mm servo double arm |
| 1 x | 50 mm black plastic spinner for fixed propeller |
| 1 x | PSC 5 |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
 |
| 3,553.32EUR |
![ER-40eVo Set A [2x ER40 + RB-45]](images/ER160.jpg "ER-40eVo Set A [2x ER40 + RB-45]")
![ER-40eVo Set B [Complet Set + GS200]](images/er40gs200.jpg "ER-40eVo Set B [Complet Set + GS200]")
![ER-50eVo Set A [2x ER50 + RB-45]](images/50_A_RB-e1481338435888.jpg "ER-50eVo Set A [2x ER50 + RB-45]")
