1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | 80 mm rods set for direction control |
1 x | Spray Graphit 33 |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | 1000 ml sealer (DOPE) |
2 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Solvent Plasti Dip 1000 ml |
2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Support Pitot JETI |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | 20 g tin paste |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Spray YELLOW Inca Lexan 150ml |
1 x | Allen wheel collar M3x5 |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | CC 03 |
1 x | Towing hook <3m |
1 x | Conector XT-30 (macho) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | BEC 3A FOXY |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | CC 02 |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Blind nut M2 (10 pcs) |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Extension silicon 10 cm (Futaba) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Futaba Female 40 cm extension |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | IKARUS plane |
1 x | GPS, Vario and altitude Sensor SBS-01G |
2 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Electric Landing Gear Trainer Jet Intro |
1 x | Straightened threaded rod M2-1m |
1 x | Power Box GPS Sensor III |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | RANGER Jet Red/Yellow 1.854mm combo |
1 x | RANGER Jet Red/White 1.854mm combo |
1 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Falcon Carbon Spinner 82mm for electric motor |
1 x | 57 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | 45 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
1 x | Nut for 515/518/519 spinner special for Hacker |
1 x | Spinner INO 57 mm Chrome (Imitacion metal) |
1 x | Cono NUT 5/16"x 24 -M4 |
1 x | 38 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | 70 mm INO spinner (carbon imitation) |
1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
1 x | 57 mm INO spinner (carbon imitation) |
1 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Jet Pipe for ASPIRE 2m JMF |
1 x | Bags wings/rudder ASPIRE |
1 x | Electric Landing Gear F9F COUGAR |
1 x | Tank BULL MØ1 4L (CMJets) |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
1 x | Canopy BULL MØ1 2.600mm |
1 x | Electric Landing Gear GALEB G4 |
1 x | ASPIRE Blue ARF 2.000 mm |
1 x | Pipa BULL MØ1 2.600mm |
1 x | Electric Landing Gear ODYSSEY |
1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
1 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
1 x | Pipa 3D BULL MØ1 2.600mm |
1 x | PowerBox Competition |
1 x | PowerBox DigiSwitch V2 JR/JR |
1 x | MicroMatch PowerBox |
1 x | Boomerang ELAN STARS & STRIPES Combo |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | PowerBox iGyro 1e |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | PowerBox MagSensor red connector |
1 x | TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo |
1 x | RANGER Jet NAVY 1.854mm combo |
1 x | BlueCom™ Adapter (iOS) |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Boomerang SPRINT V2 Yellow/Black |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | OLED-Display for PowerBox Mercury SRS |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | Support ECU Xicoy X-45 |
1 x | Ferrita con funda |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Servos wing assembly set HS 80/81/82/85 |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Ferrita 14x8x5.5 mm |
1 x | Check valve quick hose connector 4-4 mm |
1 x | Fast attachment for servos (25 pcs) |
1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
1 x | Spinner INOVA 102 mm Black |
1 x | F3A carbon 82 mm spinner for 12 mm axis |
1 x | 75 mm INO spinner (carbon imitation) |
1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
1 x | Spinner INO 70 mm Chrome (Imitacion metal) |
3 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
1 x | Spinner INO 63 mm Chrome (Imitacion metal) |
1 x | F3A carbon 80 mm spinner for Spark EVO |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
1 x | F3A carbon 95 mm spinner |
1 x | F3A carbon 85 mm spinner for Hacker Q-80 |
1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
1 x | 51 mm INO spinner (carbon imitation) |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | Spinner INO 89 mm Chrome (Imitacion metal) |
1 x | Suncover 100cc Red |
1 x | 82 mm INO spinner (carbon imitation) |
1 x | Spinner 82mm Black ventilado |
1 x | F3A carbon 85 mm spinner for AXI |
1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | 18 mm reinforced hinge |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
1 x | Landing gear strap small (4 uds) |
1 x | Angled clevis with threaded rod M3 |
1 x | Wheel cover holder Ø 3 mm (2 uds) |
1 x | Quick hose connector 3-3 mm |
1 x | Tap FESTO 4-4 mm |
1 x | Body for landing gear Ø 4 mm |
1 x | Y-Hose connector 3-3-3 mm |
1 x | T-Hose connector 6-6-6 mm |
1 x | T-Hose connector 3-3-3 mm |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Faucet FESTO |
1 x | Quick hose connector 3-3 mm |
1 x | Wheel cover holder Ø 6 mm (2 uds) |
1 x | Z-shaped servo mount |
1 x | Body for landing gear Ø 3 mm |
1 x | Tap FESTO 6-6 mm |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right) |
1 x | 290x4 mm M4 shaft ship |
1 x | Kardan Black (without pinions) |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
1 x | 270 mm 3/3 mm shaft ship |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller) |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller) |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | Spare Shaft Ø4mm L:450x18mm M4 |
|
25,924.32EUR |