| 2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | CC 05 |
| 1 x | CM-3 |
| 1 x | BEC 3A FOXY |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 2 x | JETImodel SINGLE BEC |
| 1 x | 30 cm BEC cable (male) |
| 2 x | Cabel charger transmitter GRAUPNER |
| 2 x | MPX-Dean "T" Adapter |
| 1 x | 30 cm BEC cable (female) |
| 2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | CC 01 |
| 1 x | CC 02 |
| 1 x | Circlik for shaft 2.3 mm (10 pcs) |
| 1 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | Quicklock washer 3 mm (10 pcs) |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | Lock washer 3.2 mm (20 pcs) |
| 1 x | Lock washer 4.3 mm (20 pcs) |
| 1 x | Spring lock washer 4.1 mm (20 pcs) |
| 1 x | Paint gun for sprays |
| 1 x | 20 g tin paste |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | Universal Colour Paste white 50 g |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 2 x | Universal Colour Paste deep black 250 g |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 1 x | Spannlack 1000 ml |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | RH long aluminium horn (2pcs) |
| 1 x | Cable with accesories |
| 2 x | Horn 6/35 with M3 Bearing |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 2 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Horn 5/15 with M2 Bearing |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 1 x | Horn 6/27 with M3 Bearing |
| 1 x | Interface Realflight Simulator |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | SlowFlyer control horn (3 pcs) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Optical RPM Sensor |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | Small aluminium horn red (2pcs) |
| 1 x | Small aluminium horn blue (2pcs) |
| 1 x | 20 mm carbon horn |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | Horn with ball 55x40 |
| 2 x | GameCommander USB Universal |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Long ball link M1.6 (6 uds) |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Motor ACTRO 28-3-1300 |
| 1 x | SD HC 8 GB |
| 2 x | USB Mini Camera endoscope |
| 1 x | 800TVL CMOS camera for FPV |
| 3 x | RX cabel |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
| 1 x | Multi-adapter balancer JST - TP |
| 1 x | 3 LiPo XH>EH adapter |
| 2 x | Prolonguer for Balancer Thunder Power 6S |
| 1 x | PWC4 wing/fuselage connector for 4 servos |
| 1 x | TrainerCord (master-learner) |
| 2 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | Adapter lead MPX/EC3 |
| 2 x | PSC 5 |
| 1 x | USB interface ALTIS |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | SPS 70V 100/200 A |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | SPS 70V 140/280 A |
| 1 x | Adapter lead MPX/XT60 |
| 2 x | Dean "T" - Futaba Adapter |
| 1 x | PowerBox SparkSwitch RS |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | Spray Graphit 33 |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | Release wax 250ml |
| 1 x | Universal Colour Paste deep black 50 g |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | ABS I Strip 10x5x1000 mm |
| 2 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | 270 mm 3/3 mm shaft ship |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 1 x | Spray EC Red 400ml |
| 1 x | Small control horn with bearing (2 pcs) |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
| 1 x | Prolongador S-Bus JR/JR 20cm |
| 1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
| 1 x | Spinner NUT M8x1,25 |
| 1 x | Spinner NUT 1/4x28 |
| 1 x | ABS rectangular profile 12x6.0x1000 mm |
| 1 x | RX external cable for estandar receivers |
| 1 x | Extension 6 lipos XH > EH |
| 1 x | Extension 2/3 lipos JST - JST/C |
| 1 x | Propadapter for motor A50-V3 |
| 1 x | Shaft for A60-L (140mm) |
| 1 x | USBCOM 5i |
| 1 x | Cables suitable for the motor AC 28/7 |
| 1 x | 3-blades 20x10 carbon prop Super Silence |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | Repair set for RAB0108-31 |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller) |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | AXI 2814/10 V2 |
| 1 x | Long extra-strong control horn with bearing 2,8x34 |
| 1 x | Medium extra-strong control horn with bearing 2,8x24 |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Short Switch On/Off micro |
| 1 x | Long Switch On/Off micro |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 2 x | Multi-adapter balancer JST/C - TP |
| 1 x | Interruptor RX/Batterie |
| 1 x | wing/fuselage connector for 3 pines AWG 20-24 |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | JETImodel Addcap 820 |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 1 x | 500 ccm gasoline fuel tank |
| 1 x | Ø 40 mm fiberglass motor-holder for electric motors |
| 1 x | 100g Flux Paste for Silver Solder |
| 1 x | Fan for A60 |
| 1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
| 1 x | Motor holder for AC 28/7 |
| 1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=25mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | Propeller RABOESCH M4 60 mm (5 Blades) (Right hydropropeller) |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | Propeller RABOESCH M5 90 mm (4 Blades) (Left hydropropeller) |
| 1 x | Propeller RABOESCH M4 55 mm (5 Blades) (Left hydropropeller) |
| 1 x | Propeller RABOESCH M5 80 mm (4 Blades) (Left hydropropeller) |
| 1 x | Propeller RABOESCH M5 65 mm (4 Blades) (Right hydropropeller) |
| 1 x | Strip 2,0x2,0x330 mm |
 |
| 3,315.27EUR |
