2 x | ABS angle 4,0x4,0x1000 mm |
1 x | U Profile ABS 3,0x6,0x1000 mm |
2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | MPX-Dean "T" Adapter |
1 x | Flat Connector 4.0 mm x 1000 mm |
3 x | TrainerCord (master-learner) |
1 x | 5 LiPo XH>EH adapter |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | U Profile ABS 8,0x4,0x1000 mm |
2 x | Profile ABS half cane 2.5x1000 mm |
2 x | 3 LiPo XH>EH adapter |
2 x | ABS angle 1.5x1.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
2 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
3 x | 4 LiPo XH>EH adapter |
1 x | 800TVL CMOS camera for FPV |
2 x | L-Connector 1.5 mm x 1000 mm |
1 x | Circlick securite |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | 30 cm BEC cable (female) |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | BEC 3A FOXY |
1 x | CM-3 |
2 x | Profile ABS Square 1 x 1000 mm |
1 x | USB Mini Camera endoscope |
1 x | U Profile ABS 1,0x2,0x1000 mm |
3 x | 30 cm BEC cable (male) |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | TP/TopFuel - XH 2/3S Adapter |
3 x | CC 01 |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
3 x | CC 02 |
2 x | Profile ABS half cane 2.0x1000 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Cabel charger transmitter GRAUPNER |
2 x | ABS angle 6,0x6,0x1000 mm |
2 x | Spannlack 1000 ml |
2 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
2 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Hobbylite Filler, Balsa colour |
1 x | Partall paste 650 g |
2 x | Nitroverdu 500 ml |
1 x | Plasti Dip Liquid Tape 429 ml orange |
3 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | 1000 ml sealer (DOPE) |
1 x | Ferrita con funda |
3 x | Altimeter Altis V4 |
2 x | Device Terminal |
1 x | Keypad ALTIS V4 |
2 x | Set Altimeter SHRead |
1 x | GPS Altis |
2 x | Altimeter Altis NAO |
1 x | Telemetry interface ALTIS 20 cm |
2 x | Telemetry interface ALTIS 12 cm |
1 x | Telemetry interface ALTIS 6 cm |
2 x | MultiLog Altimeter |
1 x | Telemetry interface ALTIS to Futaba |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Ballast 700gr OPALE |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
2 x | Female connector JST SH 1.0mm with 10 cm wire |
2 x | Connector Sub-D 2+5 Female |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
2 x | Rubber profile 6-2 mm 2M |
1 x | Connector CAN 15 |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | DPSI magnetic switch actuator (housing) |
1 x | Adapter lead MPX/XT60 |
1 x | Double conector with JR adapter and 200 mm extension |
2 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Prolonguer for Balancer Thunder Power 6S |
2 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
2 x | Profile ABS half cane 5.0x1000 mm |
2 x | Profile ABS triangular 6.0x1000 mm 90º |
2 x | Profile ABS half cane 7.0x1000 mm |
3 x | Profile ABS Square 4 x 1000 mm |
2 x | Universal Colour Paste deep black 250 g |
1 x | 500 ml sealer (DOPE) |
1 x | Resistor 3W 5% 2R2 |
1 x | Solvent Plasti Dip 1000 ml |
1 x | T-Connector 4.0 mm x 1000 mm |
2 x | Combo lighting module with covering drop shape |
2 x | Motor OS 3820-1200 electric |
2 x | Presto SF Light Filler styrene-free (420 g) |
2 x | SWTU2 switch |
1 x | Mudguard for 140/165 mm wheels |
1 x | Switch Cap L (Red) |
1 x | Switch Cap L (Blue) |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | Painting GHT Lexan Black 150 ml |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Decorative caps, multicoloured |
1 x | Switch Cap L (silver) |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Transmitter Balancer SPK DX-8 |
1 x | 100 Newtons FEMA absorber |
1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Transmitter Balancer Futaba V |
1 x | Decorative caps, multicoloured, short |
2 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | SyRen 10A 6V-24V Regenerative Motor Driver |
1 x | Ferrita 27x14x7 mm |
1 x | |
1 x | Crimping tool |
1 x | Dremel PERMAGRIT 18 mm round lime |
2 x | Extension 5 lipos JST/C - JST |
1 x | SPS 70V 100/200 A |
1 x | Digital scale up to 40 kg |
1 x | Crimping tool |
1 x | 2,5x60 mm allen screwdriver |
1 x | Digital precision scale up to 2000 g |
1 x | Dremel PERMAGRIT thin lime |
1 x | Copier 2x20 cm pcs |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | 3,0x60 mm allen screwdriver |
1 x | Cut tube |
1 x | Extension 5 lipos JST/C |
2 x | Extension 5 lipos JST - JST/C |
1 x | Electronic switch JETI SP6 0-15v/6A |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | PSC 6 |
1 x | MAX BEC 2 |
1 x | MPS Gas-Cap-Powerswitch |
1 x | NF-3m Heli Kit |
2 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | EXTRA 300 78" V3 Yellow/Red/Blue |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | SPARK Switch 5.9v |
1 x | DUPLEX 2.4EX MU 3 Sensor |
2 x | SBEC 30 D |
1 x | Three-position switched channel, short |
1 x | DUPLEX 2.4EX MAlti (Rev.2) |
1 x | Male connector for 10 pines AWG |
1 x | LED wire (blue - 2pcs) |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | Male Prolonger TP 4/5S |
1 x | Male connector for 6 pines AWG |
2 x | Interruptor RX/Batterie |
1 x | Multi-adapter balancer JST - TP |
1 x | Sukhoi 29S 2,6 m Yellow/Black (SebART) |
1 x | DUPLEX 2.4 EX MBar |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Switching module high voltage SXH |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
2 x | JETImodel SINGLE BEC |
1 x | SPS Remote switch actuator |
1 x | Hand Pads for Tray JETI |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | Multi-adapter balancer JST/C - TP |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | Male connector for 16 pines AWG |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | ED Position Lights wireless (Set of 3) |
1 x | LED wire (white - 2pcs) |
1 x | Male connector for 20 pines AWG |
1 x | Male connector for 12 pines AWG |
1 x | Female connector for 20 pines AWG |
1 x | Extension 6 lipos XH > EH |
1 x | LED wire (green - 2pcs) |
1 x | Extension 2/3 lipos JST/C |
1 x | TURBINATOR 2 RED/WHITE 1778 mm Combo |
1 x | Tail wheel for 8-12 kg models |
1 x | Tailwheel for F3A size |
1 x | Tail gear set (60-120 class) |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Rubber profile 10-2 mm 2M |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Rubber profile 8-2 mm 2M |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Propeller hub spacer 8/5.5 |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Receiver replacement antenna, approx. 15 |
1 x | Motor A50-12 L Glider |
1 x | Release wax 250ml |
1 x | Motor B40-10 L |
1 x | Motor A200-6 |
1 x | Shaft for A60-XS-V2 (112,5mm) |
1 x | Spray EC Red 400ml |
1 x | Motor A30-14 M V2 6 Poles |
1 x | Motor A200-8 |
1 x | Motor A20-22 L EVO |
1 x | Motor A60-6XS V4 28-pole kv370 |
1 x | Frontal support Speed 600 |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Ferrita 17x10x6.5 mm |
1 x | Ring support P-20 OPUS V-Jet 60mm |
1 x | Neck strap JETI DS |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | Short Switch On/Off micro |
1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
1 x | Transmitter Stick Ends V4 Blue- M3 (2 pcs) |
1 x | DC Small for MultiLog & UltraLight |
1 x | Tren de cola carbono 50-70cc |
1 x | Tailwheel for 20/60 size |
1 x | Set stickers JEEMO "Andy" |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Tool for entel |
1 x | Bags de Luxe ULTIMATUM 2.0 |
1 x | Fuselage Bags JEEMO |
1 x | Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt |
1 x | Vacuum pump 12 CFM |
1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | Wings Bags JEEMO |
1 x | VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit |
1 x | Brake controller for 28 and 36 mm Brakes |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re |
1 x | Tank ULTIMATUM 2.0 (3.2 L) PRO |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | BOEING 727, Electric brake 28mm + controller |
1 x | Tool for entel |
1 x | Set transmisions ULTIMATUM 2.0 (dura/aluminium) |
1 x | Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Tube bender |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
|
25,374.20EUR |