| 1 x | Molde conector Dean-T |
| 1 x | Fresa corte diamante Ø 1.0mm (bola) |
| 1 x | Tijera electrica |
| 1 x | Soporte lija 25 mm |
| 1 x | Fresa corte diamante Ø 2.35mm (lentil) |
| 1 x | Destornillador allen 2,0x50 mm molibdeno |
| 1 x | Electrodos de plata 55% (2 pcs) |
| 1 x | Lija cóncava-convexa con papel de 13 mm |
| 1 x | Destornillador allen 1,5x50 mm molibdeno |
| 1 x | Bolsas inyectoras desechables (30x16cm) 100 pcs |
| 1 x | Destornillador allen 3,0x60 mm molibdeno |
| 1 x | Conector "T" 6-6-6 mm tubo bomba vacio |
| 1 x | Tijeras curvas 16cm - GFK/CFK/Aramid |
| 1 x | Copiador 5 unidades de 20 cm |
| 1 x | Juego llaves allen Extra-duro Titanium (1.5/2.0/2.5/3.0) |
| 1 x | Disco Corte Proxxon/Dremmel 22 mm |
| 1 x | Alicate para "Ball-Link" |
| 1 x | Acumulador polvo para limpieza moldes |
| 1 x | Dremel 3000 130W |
| 1 x | Lima fina PERMAGRIT para Dremel |
| 1 x | Pasta soldar 100g |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | Bascula precision 0.1-2000 g |
| 1 x | Destornillador allen 2,5x60 mm molibdeno |
| 1 x | Tijera curva PREMIUM 16 cm |
| 1 x | Crimpadora |
| 1 x | Alicate para "Ball-Link" |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | Bancada servo gancho |
| 2 x | Gancho de remolcador |
| 2 x | Gancho de remolque + 4,5 m |
| 1 x | Gancho de remolque hasta 4,5 m |
| 2 x | Gancho de lanzamiento fijo |
| 1 x | Gancho de lanzamiento regulable |
| 1 x | Gancho de remolque hasta 3m |
| 1 x | Acople ALU M2,5 Ø 6 (2 uds) |
| 1 x | Horn corto de latón M4 para cable (4 pcs) |
| 1 x | Horn corto de latón M4 para cable (10 pcs) |
| 1 x | Horn control flaps (1 pcs) |
| 1 x | Medidor angulos y/o incidencias |
| 1 x | Soporte WingFix ULTRA BE |
| 1 x | Acople ALU M2,5 Ø 4 (2 uds) |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | Acople ALU M2,5 Ø 3 (2 uds) |
| 1 x | Horn aluminio negro LH largo L31xH30 (2pcs) |
| 1 x | Conjunto de mandos arriostrados |
| 1 x | Acople ALU M3 Ø 6 (2 uds) |
| 1 x | Horn aluminio pequeño amarillo (2pcs) |
| 1 x | Horn de control para SlowFlyer (3 pcs) |
| 1 x | Acople ALU Izda. M2,5 Ø 4 (2 uds) |
| 1 x | Soporte para aviones SebArt |
| 2 x | Horn de mando 5/10 con rótula M2 |
| 1 x | Horn con ball 55x40 |
| 1 x | Horn aluminio anodiazado 6 mm rojo con rótula |
| 1 x | Acople ALU M2 Ø 3 (2 uds) |
| 1 x | Carro remolque para veleros 720 x 285 mm |
| 1 x | Medidor ángulos |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs) |
| 1 x | Fibra carbono tela 160g/m2 127 cm x 5 m |
| 1 x | ARAMID panel nido de abeja 1300x2600x2 mm |
| 1 x | Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m |
| 2 x | Cinta fibra de vidrio 225g / m² (Silane, liso) 30 mm, 100m |
| 1 x | Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m |
| 2 x | Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Modulo PPM Encoder |
| 2 x | Sensor digital Air Speed con Pitot |
| 2 x | Canal de ABS de 3,0x6,0x1000 mm |
| 1 x | Perfil de ABS "T" 2.0x2.0x1000 mm |
| 1 x | Perfil Acero Inox. 15.5x8.5x1000 mm |
| 1 x | Perfil de ABS "L" 1.5x1.5x1000 mm |
| 1 x | Perfil de ABS "L" 2,0x2,0x1000 mm |
| 3 x | Conector ABS "L" 4.0 mm x 1000 mm |
| 1 x | Perfil Acero Inox. 19.5x9.8x1000 mm |
| 1 x | Perfil Acero Inox. 9.0x5.0x1000 mm |
| 1 x | Perfil Acero Inox. 14.5x9.6x1000 mm |
| 1 x | Perfil de ABS "T" 6.0x6.0x1000 mm |
| 2 x | Perfil de ABS "L" 4,0x4,0x1000 mm |
| 1 x | Perfil de ABS cuadrado 4 x 1000 mm |
| 1 x | Canal de ABS de 8,0x4,0x1000 mm |
| 1 x | Perfil de ABS de media caña 2,5x1000 mm |
| 1 x | Perfil de ABS "L" 5,0x5,0x1000 mm |
| 1 x | Perfil Acero Inox. 6.3x3.5x1000 mm |
| 2 x | Conector ABS "L" 1.0 mm x 1000 mm |
| 1 x | Perfil Acero Inox. 17.8x12.4x1000 mm |
| 1 x | Hélice POWER-PROP 13x9 Izda |
| 1 x | Perforador hélices para DLE111 y DA85-150 |
| 1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
| 1 x | Prolongador Futaba hembra 40 cm de silicona |
| 1 x | Molde conector XT-90 |
| 1 x | Bascular < 40 Kg |
| 1 x | Piloto 1/10 "Jimmy" |
| 1 x | Depósito "Taxi Tank" |
| 1 x | Cono 102 mm aluminio |
| 1 x | Perfil de ABS cuadrado 2 x 1000 mm |
| 1 x | Sistema cierre 330 mm con abrazadera (4 pcs) |
| 1 x | Horn corto de latón M3 para cable (2 pcs) |
| 1 x | Horn de mando extra-largo ajustable aluminio 2,8x34 |
| 1 x | Horn aluminio roscado 6 mm con rótula |
| 1 x | Horn de mando 5/15 con rótula M2 |
| 1 x | Horn largo de latón M2 para cable (2 pcs) |
| 1 x | Manta bolsa de vacio 300 gr/m2 Bobina 1m |
| 1 x | Medidor angulos tamaño pequeño |
| 1 x | Malla PVC diagonal 290x185x0,32 mm |
| 1 x | Palas VTX 477 Carbon rotorblade |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | Bolsa vacio 1200 mm x 50 m |
| 1 x | Plancha aluminio 500x250x0.5 mm |
| 1 x | Fibra de vidrio 25 g (2 m²) |
| 1 x | Fibra de vidrio 25 g/m² (1 m²) |
| 1 x | Fibra de vidrio picada 3mm (1 Kg) |
| 1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
| 1 x | Plancha fibra vidrio 350x150x1.5 mm |
| 2 x | Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m |
| 1 x | Plancha fibra vidrio 350x150x0.3 mm |
| 1 x | Release film 100 cm x 50 m |
| 1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 1 x | Plancha de goma espuma (310x210x2 mm) |
| 1 x | Plancha estireno 320x120x1.0 mm |
| 2 x | Tail boom brace LOGO 480 |
| 1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 1 x | Plancha de goma espuma (310x210x5 mm) |
| 2 x | Conector ABS "L" 1.5 mm x 1000 mm |
| 1 x | Acoplador Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Polea de bronce 14/2 (2 pcs) |
| 1 x | Acoplador "Z" Ø 2 (2 uds) |
| 1 x | Acople ALU M3 Ø 5 (2 uds) |
| 1 x | Funda hélices 16-20" (1 pcs) |
| 1 x | Perfil de ABS de media caña 4x1000 mm |
| 1 x | Perfil de ABS de media caña 5,0x1000 mm |
| 1 x | PIX Hawk con accesorios |
| 1 x | Conector ABS "H" 4.0 mm x 1000 mm |
| 1 x | Perfil goma 6-2 mm 2M |
| 1 x | Perfil de ABS triangular 4.0x1000 mm 90º |
| 1 x | Canal de ABS de 1,0x2,0x1000 mm |
| 1 x | Lunak ARF 2000 mm Amarillo (Hacker Model) |
| 1 x | Sistema cierre 360 mm con abrazadera (2 pcs) |
| 1 x | Listón triangular de BALSA 6x6x1000 mm |
| 1 x | Plancha de balsa 10x100x1000 mm |
| 1 x | Plancha de balsa 1,0x100x1000 mm |
| 1 x | Plancha de balsa 6,0x100x1000 mm |
| 1 x | Helice Carbono 18x19 |
| 1 x | Helice Carbono 13x9 |
| 1 x | Helice Carbono 18,5x12 |
| 1 x | Helice RF Carbono 10x17 |
| 1 x | DJI FPV Combo |
| 1 x | Gancho remolque inferior plano |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Antena Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Listón de BALSA 5,0x5,0x1000 mm |
| 1 x | Fundas alas/cola ASPIRE |
| 1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 1 x | Soporte Guia Antena doble |
| 1 x | Fundas alas/cola ODYSSEY |
| 1 x | Listón triangular de BALSA 15x15x1000 mm |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Liston de BALSA Borde ataque 8 x 10 x 1000 mm |
| 1 x | Liston de BALSA 10 x 10 x 1000 mm |
| 1 x | Fundas de Luxe completas ODYSSEY |
| 1 x | Fundas MB-339 (Alas-Profundidades) |
| 1 x | Liston de BALSA 8,0x8,0x1000 mm |
| 1 x | Listón de BALSA 2,0x2,0x1000 mm |
| 1 x | Plancha de balsa 1,5x100x1000 mm |
| 1 x | Plancha de balsa 4,0x100x1000 mm |
| 1 x | Listón triangular de BALSA 8x8x1000 mm |
| 2 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | Plancha de balsa 3,0x100x1000 mm |
| 1 x | Liston de BALSA 6,0x6,0x1000 mm |
| 1 x | Base para servo |
| 1 x | Fundas de Luxe completas ASPIRE |
| 1 x | Listón de BALSA 3,0x3,0x1000 mm |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Helice Carbono 12.5x6.5 |
| 1 x | Helice Carbono 15x13 |
| 1 x | Helice Carbono 14x8 Slim |
| 1 x | Helice Carbono 12.5x7 |
| 1 x | Helice Carbono 20x13 "blanca" |
| 1 x | Helice Carbono 14x10 |
| 1 x | Helice RF Carbono 14,5x14 |
| 1 x | Helice Carbono 18x17 |
| 1 x | Helice Carbono 12.75x13 |
| 1 x | Helice Carbono 14.5x10 Slim |
| 1 x | Helice Carbono 16x17 |
| 1 x | Helice Carbono 16x13 |
| 1 x | Helice Carbono 15x7 |
| 1 x | Helice Carbono 14x7 |
| 1 x | Helice Carbono 18x9 |
| 1 x | Helice Carbono 15x16 |
| 1 x | Helice Carbono 13x7.5 |
| 1 x | Helice RF Carbono 16x8,5 S |
| 1 x | Helice Carbono 15x13 Slim |
| 1 x | Helice Carbono 11x8 |
| 1 x | Helice RF Carbono 13x7 |
| 1 x | Helice Carbono 16x16 Slim |
| 1 x | Helice Carbono 12x6 |
| 1 x | Helice Carbono 23x12 |
| 1 x | Helice Carbono 14x8 |
| 1 x | Helice Carbono 14x6.5 |
| 1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
| 1 x | Cristal TX 35.050 Ch 70 |
| 1 x | EXTRA NG 85" 2159mm Yellow/Blue |
| 2 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
| 1 x | T-Motor U7-V2.0 Kv420 |
| 1 x | Aro soporte P-20 OPUS V-Jet 60mm |
| 1 x | Motor Mega AC 16/25/06 |
| 1 x | Motor Mega AC 22/30/03 |
| 1 x | Tubo protección arranque turbina 50N |
| 1 x | Motor OS 95 AX |
| 1 x | Motor OS FS 95 V4T |
| 1 x | Motor OS 81 FS 4T |
| 1 x | Ball link latón BS M3 V1 (10 pcs) |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
| 1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Conector ABS "T" 4.0 mm x 1000 mm |
| 1 x | Perfil Acero Inox. 11.5x6.5x1000 mm |
| 1 x | Cristal TX 35.180 Ch 78 |
| 1 x | Cristal Universal RX 35.050 Ch 65 |
| 1 x | Plancha carbono 350x150x3.0 mm |
 |
| 13,888.35EUR |
