| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | Spring lock washer 4.1 mm (20 pcs) |
| 1 x | Spring lock washer 3.1 mm (20 pcs) |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Spring lock washer 2.1 mm (20 pcs) |
| 1 x | Aluminium cap bolt washer M4 red (8 pcs) |
| 1 x | Flat washer 2.2 mm (20 pcs) |
| 1 x | Quicklock washer 2 mm (10 pcs) |
| 1 x | Circlik for shaft 1.2 mm (10 pcs) |
| 1 x | Circlik for shaft 2.3 mm (10 pcs) |
| 1 x | Quicklock washer 3.5 mm (10 pcs) |
| 1 x | Quicklock washer 3 mm (10 pcs) |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 1 x | Quicklock washer 1 mm (10 pcs) |
| 1 x | Flat washer 2.7 mm (20 uds)pcs) |
| 1 x | Flat washer 1.7 mm (20 pcs) |
| 1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | Spring lock washer 2.6 mm (20 pcs) |
| 1 x | Lock washer 4.3 mm (20 pcs) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Lock washer 3.2 mm (20 pcs) |
| 1 x | M3-M4 rubber washer (8 pcs) |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | M3 black washers (4 pcs) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 2 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 2 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 2 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Ball Link ALU M3 - RH (1 pcs) |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 2 x | Threaded coupler M3 (10 uds) |
| 1 x | Z type of cable coupler Ø 1 (2 uds) |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 2 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Z Bender - S Type Tool |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | Starter EM Gear Power 80 |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Cut tube |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Digital scale up to 40 kg |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Ball Link Plier |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Z Bender - S Type Tool |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Vacuum pump P1-N |
| 1 x | Vacuum pump 12 CFM |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Blind nut M6 (4 pcs) |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | Aluminium M2x12 mm screw (4 pcs) |
| 1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
| 1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
| 1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Avanti S 1.8m Jet FREECE TRICOLORI |
| 1 x | Rafale C (Aero-naut) |
| 1 x | Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Circlik for shaft 1.5 mm (10 pcs) |
| 1 x | Canopy F9F Panther (Aero-naut) |
| 1 x | Avanti S 1.8m Jet White/Blue |
| 1 x | Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe |
| 1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
| 1 x | 10-15mm Servo Arm |
| 1 x | Kobuz 5000 mm (Airwold) |
| 1 x | Pulley brass 6/1,5 (2 pcs) |
| 1 x | BLANIK 50 V2 Silver/Blue (SebArt), cabina |
| 1 x | X-RAY Micro QR (Elevator) |
| 1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
| 1 x | Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
| 1 x | Fox 4000 mm with flaps (Airwold) |
| 1 x | Pulley brass 8/2 (2 pcs) |
| 1 x | Servo TOPMODEL STANDARD S3217 |
| 1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
| 1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
| 1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Micro clevis (10 uds) |
| 1 x | Hitec 38 mm servo arm |
| 1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
| 1 x | Metal clevis M3 (10 uds) |
| 1 x | Hitec 25 mm servo arm with ball link |
| 1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
| 1 x | Servo GO-1053 MG 20.0kg |
| 1 x | Rubber profile 8-2 mm 2M |
| 1 x | Round Rod 1.0x3.5 cm |
| 1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
| 1 x | Horizontal servo holder |
| 1 x | Pulley brass 2,5/1 (2 pcs) |
| 1 x | Futaba 46 mm servo arm with ball link |
| 1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
 |
| 14,661.98EUR |
