2 x | 1/4 Pilot "Mike" |
2 x | 1/10 Pilot "Jimmy" |
2 x | 1/6 Pilot "Tony" |
2 x | 101x28 mm (4.0") Type jets aluminium core wheel |
3 x | |
1 x | |
2 x | 110x55 mm SLH KOVO wheel |
2 x | 1/10 Pilot "Jack" |
2 x | 110x55 mm C SLH KOVO wheel |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
2 x | 1/6 Pilot "Cindy" |
3 x | "Taxi Tank" Fuel Tank |
1 x | 1/12 Pilot "Langley" |
1 x | 102 mm aluminium spinner |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
2 x | 280 cc gasoline fuel tank complet |
1 x | 28x5 mm wires output (2 pcs) |
3 x | 102 mm INO spinner (carbon imitation) |
2 x | 120x60 mm SLH KOVO wheel |
1 x | 32x9 mm foam standar KOVO wheel (2 pcs) |
2 x | 100x50 mm SLH KOVO wheel |
2 x | 1/7 Pilot "Japanese" |
2 x | 1/12 Pilot "Cougar" |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
2 x | 1/4 Pilot "Heidi" |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
2 x | 25 mm carbon servo arm |
1 x | 1/6 Pilot "Buddy" |
2 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | 160 mm carbon undercarriage (2pcs) |
2 x | 1/12 Pilot "Fighter" |
2 x | 20 mm carbon horn |
1 x | 10 mm gas motor standoff |
1 x | 1/6 Pilot "Garry" |
2 x | Motor DLE 430 cc - Paramotors |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Motor DLE 170 M- Paramotors |
1 x | Cable video GoPro |
2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Threaded coupler M2 (10 uds) |
1 x | 20x200 mm battery rings |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | 18 mm reinforced hinge |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Fixed launching hook |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | LOWER TOW HOOK |
1 x | Adjustable launching hook |
1 x | Towing hook <3m |
1 x | Round Rod 2,5x1000 mm |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Propeller balancer |
1 x | Oracover CHROME 2m |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Round Rod 1,25x1000 mm |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Horn for flap control (1 pcs) |
1 x | Long ball link M2 (6 uds) |
1 x | Joint with bearing M3 22x5,5 |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | ORACOVER Fluor red (2 m) |
1 x | Optical RPM Sensor |
1 x | Long ball link M3 (6 uds) |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Horn 5/15 with M2 Bearing |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Round Rod 1,5x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Adapter 4,0 mm M8 |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Horn 6/35 with M3 Bearing |
1 x | Vacuum pump P1-N |
1 x | 6 mm M3 variable horn |
1 x | 6 mm Prop Adapter M8 |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Horn mando long (2 pcs) |
1 x | Oracover CARBON Metalic 1 m |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Surface Indicator Gauge Small |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Ball link M3 (10 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
2 x | Long ball link M1.6 (6 uds) |
1 x | Allen wheel collar M3x5 |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Copier 2x20 cm pcs |
1 x | Round Rod 5,0x1000 mm |
1 x | Cut tube |
1 x | 10 mm dogdrive props |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Ball link M1.6 (6 uds) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Straightened threaded rod M3 - 1m |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
1 x | Vacuum pump 12 CFM |
1 x | Tygon tube 6.35 x 3.18 mm 15 m |
1 x | 550 cc gasoline fuel tank complet |
1 x | 76x23 Ø3.5 mm aluminium core wheel |
1 x | USB Adaptor OPTronics |
1 x | 57 mm INO spinner (carbon imitation) |
1 x | Xplorer1 anemometro |
1 x | Fuel Fittings-Red |
1 x | Deposito combustible tipo "turbina" 330 ml |
1 x | FESTO connector M7 barb fitting 6mm |
1 x | 500 ccm complete gasoline fuel tank |
1 x | 70x23 Ø3.5 mm aluminium core wheel |
1 x | 51 mm INO spinner (carbon imitation) |
1 x | 70 mm INO spinner (carbon imitation) |
1 x | 45 mm aluminium spinner. |
1 x | 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel |
1 x | White aluminium 230 mm landing gear |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
1 x | TYGON tubo 1 m Diam. 3.4 x 2.0 mm |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Tube Pitot to PIXHAWK |
1 x | Xplorer2 anemometro |
1 x | 63 mm INO spinner (carbon imitation) |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Bags de Luxe ASPIRE |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | BALSA trip 10x10x1000 mm |
1 x | Antenna holder bracket double |
1 x | Motor DLE 200cc Premium Muffler |
1 x | FESTO connector 1/8 Quick 6mm 90º |
1 x | BETA 1400 ARF Red |
1 x | Fuel bottle 500 ccm |
1 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
1 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
1 x | Engine mounts for .09 - .19 engine |
1 x | Propeller FALCON 5-BL 24x23.5 |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Turnbuckle M3 33x49 (2pcs) |
1 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Turbina KINGTECH K320 G5 |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Round Rod 1.0x3.5 cm |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Heli blades angle measurer |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | Socket head long ball link M3 (2 uds) |
1 x | Field folding model stand |
1 x | Sealing Iron Sleeve STD |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | Strip 1,5x1,5x330 mm |
1 x | Motor OS MAX 65 AX (incl. muffler) |
2 x | Hot Glue Stick RED |
1 x | Spinner 90 mm GFK |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | 20x15 Falcon electric V2 |
1 x | 21x14 Falcon electric carbon prop (64 g) |
1 x | 20x13 Falcon electric carbon prop (64g) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Lock nut M2.5 (10 pcs) |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | Hexagonal Nut M1,6 (10 pcs) |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Lock nut M2 (20 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Landing gear strap medium (4 uds) |
1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Turbine RABBIT 100 SE 11 Kg |
1 x | Ferrita 17x10x6.5 mm |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Ferrita 27x14x7 mm |
1 x | Long pinned hinge (6 uds) |
1 x | Long adjustable control horn 3x34 |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Kwik link unmount tool |
1 x | Precision wrench L100 mm |
1 x | Socket head ball link M3 (2 uds) |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Heli blades angle measurer |
1 x | Llave dinamomterica 74 Z 0 0 21 |
1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
1 x | Round Rod 6,0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Strip 2,5x1,25x330 mm |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | wire tensioner (red) |
|
29,616.99EUR |