| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 2 x | Liston HAYA 3 x 10 x 1000 mm |
| 2 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | Linden wood slat 2.0x2.0x1000 mm |
| 2 x | BALSA trip 2.0x2.0x1000 mm |
| 2 x | Liston HAYA 10 x 10 x 1000 mm |
| 2 x | Walnut wood slat 2.0x2.0x1000 mm |
| 2 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 2 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 2 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Spring lock washer 2.1 mm (20 pcs) |
| 1 x | Flat washer 1.7 mm (20 pcs) |
| 1 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Spring lock washer 2.6 mm (20 pcs) |
| 1 x | Circlik for shaft 1.5 mm (10 pcs) |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | Aluminium wide washer M4 Gold (4 pcs) |
| 1 x | Spring lock washer 4.1 mm (20 pcs) |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | Spring lock washer 3.1 mm (20 pcs) |
| 2 x | Lock washer 2.7 mm (20 pcs) |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | Flat washer 2.2 mm (20 pcs) |
| 2 x | Lock washer 3.2 mm (20 pcs) |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 2 x | Quicklock washer 1 mm (10 pcs) |
| 1 x | Quicklock washer 2 mm (10 pcs) |
| 1 x | M3 black washers (4 pcs) |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Circlik for shaft 1.9 mm (10 pcs) |
| 1 x | Flat washer 3.2 mm (20 pcs) |
| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Flat washer 2.7 mm (20 uds)pcs) |
| 2 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | Banna gold connector 2,5 mm (M/F) |
| 2 x | PIX Hawk with accesories |
| 1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | Conector BEC female (10 pcs) |
| 2 x | Glases Nimbus "Black" |
| 1 x | Glases Moritz |
| 1 x | Pilot "Dick" Legends Series (Slimline) |
| 1 x | Ball link M1.6 (6 uds) |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Z Bender - S Type Tool |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 2 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 2 x | Fiberglass landing gear for 140-160 |
| 2 x | Air pressure gauge |
| 1 x | Nylon gear block Ø 6 mm (2 uds) |
| 1 x | Nylon threaded block M4 (2 uds) |
| 1 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
| 1 x | Nylon gear block Ø 5 mm (2 uds) |
| 1 x | Faucet FESTO |
| 2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Fail Safe air retract |
| 1 x | Bearing block for noseleg landing gear |
| 1 x | Legs + electric brakes for Viper Jet 1700 mm |
| 1 x | Blue Aluminium lock nut M4 (4 pcs) |
| 1 x | Lock nut M5 (10 pcs) |
| 2 x | Nut for mounting M2 (4 pcs) |
| 1 x | Pan Head Screw M2x8 PH countersunk head |
| 2 x | Lock nut M2 (20 pcs) |
| 1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
| 1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
| 1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
| 1 x | Blue Aluminium lock nut M3 (4 pcs) |
| 1 x | X-RAY Micro QR (Tail Tube) |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Nylon Screw M5x30 |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Electric spoiler 300 mm (2 pcs) |
| 1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
| 1 x | Servo M2x7/16 screw (4 pcs) |
| 1 x | Lock nut aluminium M3 (4 pcs) |
| 1 x | Lock nut M3 (10 pcs) |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Glases Stratus |
| 1 x | Connectors banna gold 5,5 mm (M/F) |
| 1 x | T-Motor U7-V2.0 Kv420 |
| 1 x | Conector JR Servo female (50 pcs) |
| 1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 1 x | Oracover CHROME 2m |
| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 1 x | ORACOVER transparent Yellow (10 m) |
| 1 x | Conector JR Servo female (10 pcs) |
| 1 x | Connector CAN 15 |
| 1 x | Conector MT-60 (pair) |
| 1 x | Bag connector 2 mm |
| 1 x | Conector Servo female 4 pines |
| 1 x | Glases Flitemaster |
| 1 x | Conector MR-60 (pareja) |
| 1 x | Glases Ace |
| 1 x | 1804 2400KV Brushless Motor Qav 250 mini |
| 1 x | Body for landing gear Ø 3 mm |
| 1 x | Landing gear retract neumatic (Jet Legend) |
| 1 x | Festo Adaptor Tygon Large/4mm |
| 1 x | Body for landing gear Ø 4 mm |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
| 1 x | Y-Hose connector 3-3-3 mm |
| 2 x | Angled clevis with threaded rod M3 |
| 1 x | Xoar Electric Beechwood Prop 12x6 |
| 1 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
| 1 x | 150 Newtons FEMA absorber |
| 1 x | Racor 4/4 mm |
| 1 x | T-Hose connector 3-3-3 mm |
| 1 x | Racor 4/3 mm |
| 1 x | Racor 4/6 mm |
| 1 x | Racor "Y" 3 mm |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 1 x | Wheel cover holder Ø 5 mm (2 uds) |
| 1 x | Y-Hose connector 4-4-4mm |
| 1 x | Tap FESTO 6-6 mm |
| 1 x | Wheel cover holder Ø 3 mm (2 uds) |
| 1 x | Quick hose connector 4-4 mm |
| 1 x | Servo arm with 6 mm hole to FEMA 9800A |
| 1 x | Nylon threaded block M5 (2 uds) |
| 1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
| 1 x | Wheel FEMA 165 mm / 8 mm |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
| 1 x | Compact on-board starting system (9512) |
| 1 x | Servo arm with 5 mm hole to FEMA 9810A |
| 1 x | Wheel FEMA 178 mm / 8 mm |
| 1 x | Servo holder for retract |
| 1 x | 200 Newtons FEMA absorber |
| 1 x | Compact on-board starting system (9525) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
| 1 x | Adapter 3,2 mm M8 |
| 1 x | Combo 4 pcs AXI 2204 Multicopter |
| 1 x | Tool for entel |
| 1 x | XT60 Connector with Holder Male 2pcs |
| 1 x | Soldering PCBs 8pin, 5 pieces |
| 1 x | ARTIST 1.560 mm |
| 1 x | Screw M2.5x5 (10 pcs) |
| 2 x | Screw M2.5x20 (10 pcs) |
| 1 x | Canopy Astra |
| 1 x | Bags de Luxe ODYSSEY |
| 1 x | F-4 Phantom Scale 1:7, Electric retract landing gear |
| 1 x | Micro Crystal RX 35.010 Ch 61 |
| 1 x | F9F COUGAR Red ARF 1.562 mm |
| 1 x | RANGER Jet CANADA 1.854mm combo |
| 1 x | Sliding window 1:2,4 / 1.2,6 Scale |
| 1 x | ASPIRE Blue ARF 2.000 mm |
| 1 x | Boomerang SPRINT V2 Red/White/Blue |
| 1 x | Crystal Universal TX 35.140 Ch 74 |
| 1 x | PPM Encoder Module |
| 1 x | Electric Landing Gear F9F COUGAR |
| 1 x | X-RAY Micro QR |
| 1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
| 1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
| 2 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
| 1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
| 1 x | Adapter 4,0 mm M6 |
| 1 x | Allen wheel collar M4x6 |
 |
| 14,538.78EUR |
