| 1 x | Neck strap JETI DS |
| 1 x | Tray JETI for DS-14/16/24 Black |
| 1 x | Battery LiPo TATTU 1800 mAh 4S 14.8V 75C |
| 1 x | VASA 55 w/Tyhpoon 240-15 4800kv |
| 1 x | FesEx-Uni8 System |
| 1 x | 18m Fitting barb |
| 1 x | Futaba S-Bus Rx/Gyro Link Lead |
| 1 x | Oracover Green10 m |
| 1 x | MAULE M-7-420 2.8m Red |
| 1 x | Futaba TM-24 "F" Series 2.4GHz T-FHSS Module |
| 1 x | Servo HITEC D645 MW |
| 1 x | 28x10 BIELA propeller |
| 1 x | 22m Fitting barb |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 2 x | Ball Link Plier |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | RH long aluminium horn (2pcs) |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | "M" set |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Blue smoke canister 140 g |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | Smoke set "Glider" |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Oracover GREY Seafire Sea 2m |
| 1 x | CC 02 |
| 1 x | Ball Link Plier |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Green smoke canister 140 g |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | White smoke canister 140 g |
| 1 x | Yellow smoke canister 65 g |
| 1 x | Dust collector for mould cleaning |
| 1 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | Ventral support for AX-18/AX-60 |
| 2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Vacuum pump 12 CFM |
| 1 x | PPM Encoder Module |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Oracover White 10 m |
| 1 x | "S" set for boats |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | White smoke bombs AX-60 (5 pcs) |
| 1 x | Oracover Yellow CUB 10 m |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Oracover Verde 2 m |
| 1 x | Oratex Antik 2m |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Oracover light Grey 2m |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Electric rocket starters (6 pcs) |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Oracover Azul Cielo 2 m |
| 1 x | CC 05 |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Oratex Silver 2m |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Horn 6/20 with M3 Bearing |
| 2 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Oracover Black 2 m |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 2 x | |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Parachutist |
| 1 x | Blue smoke canister 100 g |
| 1 x | Oracover Azul 2 m |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Red smoke canister 65 g |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | Oratex Red Fokker 10 m |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | White smoke bombs AX-9 (10 pcs) |
| 1 x | Green smoke canister 65 g |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Oracover Orange 2 m |
| 1 x | Oracover White 2 m |
| 1 x | Horn 5/10 with M2 Bearing |
| 1 x | CM-3 |
| 1 x | Monokote ROJO misil (1.8x0.65m) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Motor A2212/13T |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
| 1 x | Dean-T Plug Mold |
| 2 x | Pulley brass 8/2 (2 pcs) |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Sealing Iron STANDARD |
| 1 x | 100g Flux Paste for Silver Solder |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
| 1 x | Small flex hinge (12 uds) |
| 1 x | Digital weight, angle and balance meter BASIC |
| 1 x | Pin hinge 34x16 mm (10 uds) |
| 1 x | wire tensioner (silver) |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
| 1 x | Carbon plate 350x150x4.0 mm |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Receptor FUTABA R7003SB FASST |
| 1 x | Receiver FUTABA R6004 FF FAST |
| 1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Kwik link with arm M5xM2,5xL30 |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | Pulley brass 14/2 (2 pcs) |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | Female connector for 10 pines AWG |
| 1 x | Male connector for 10 pines AWG |
| 1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
| 1 x | 25 mm Sandpaper file |
| 1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
| 1 x | DPSI magnetic switch actuator (housing) |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Female connector for 6 pines AWG |
| 1 x | Male connector for 6 pines AWG |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
| 1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
| 1 x | EC-Cutter |
| 1 x | Large flex hinge (12 uds) |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Interruptor SPS 70v 60/120A |
| 1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
| 1 x | Z Bender - S Type Tool |
| 1 x | Propeller diller for DLE111 and DA85-150 |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | Porta Kwik link M4 4 mm (2 pcs) |
| 1 x | Cable coupler M2 (10 uds) |
| 1 x | Pull-Pull complet set with CF rudder double servo arm |
| 1 x | Foam plastic plates (310x210x8 mm) |
| 1 x | Extension for SensorSwitch 30cm |
| 1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
| 1 x | PowerBox PowerExpander SRS |
| 1 x | R617 FS 2,4 GHz receiver |
| 1 x | R6106 HF 2,4 GHz receiver |
| 1 x | Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver |
| 1 x | Antena FUTABA RX 606/607/6014/2006/2008/3008/7006/7008, 2 pcs. |
| 1 x | Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS |
| 1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
| 1 x | Futaba R3006SB T-FHSS 2.4GHz |
| 1 x | Receptor FUTABA R3106GF T-FHSS |
| 1 x | Receiver FUTABA R7108SB FASSTest/FASST |
| 1 x | Receiver R7008SB FASSTest |
| 1 x | Ant. Cable R606/17/08/14FS L:1500mm |
| 1 x | Male connector for 12 pines AWG |
| 1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
| 1 x | Fiberglass 25 g/m² 5000x1270 mm |
| 1 x | Lock nut M5 (10 pcs) |
| 1 x | Landing gear strap small (4 uds) |
| 1 x | Lock nut M2 (20 pcs) |
| 1 x | Lock nut M2 (10 pcs) |
| 1 x | M2,5 Diam metal ball link V3 (2 pcs) |
| 1 x | M2 5Diam short black ball link V2 (2 pcs) |
 |
| 8,881.93EUR |
