| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 2 x | Servo NARO Max Std |
| 3 x | Hovercraft sailcloth |
| 1 x | Set cintas unión paracaídas 145 cm |
| 1 x | Regulador Actro-Marine 80A |
| 1 x | Horn 5/10 with M2 Bearing |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Horn F3A de Titanium 16 mm (2 units) |
| 1 x | Cockpit plastic closing |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Blue smoke canister 140 g |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Mixers smoke bombs AX-60 (5 pcs) |
| 1 x | Yellow smoke canister 140 g |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | Blue smoke canister 100 g |
| 1 x | GameCommander USB Universal |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Initior Transmitter FTX2 Wireless |
| 1 x | Horn mando long (2 pcs) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Parachutist |
| 1 x | Green smoke canister 100 g |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Remote electric ignition system |
| 1 x | Brass control horn M2 long for wire (10pcs) |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Starter EM Gear Power 250 |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Glases Ace |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
| 1 x | Extension silicon 30 cm male (Futaba) |
| 1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 1 x | XH female balance (4S) connector (2 pcs) |
| 1 x | Glases Nimbus |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Cinta Goldfix 1m |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | Crimping tool |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | Z Bender - S Type Tool |
| 1 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | XH female balance (5S) connector (2 pcs) |
| 2 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | Banna gold connector 2,5 mm (M/F) |
| 1 x | Glases Moritz |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Spray EC Red 400ml |
| 1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Spannlack 1000 ml |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Albatros red/white (Top Model) |
| 1 x | Chili F3K 2 wing servo mounted |
| 1 x | Fascination 3600 mm, Spare Elevator (Top Model) |
| 1 x | ENIGMA ARF |
| 1 x | Ion Pro NG electric with flaps GREEN Fluor (JP Model) |
| 1 x | Aero-Master Wings (Aero-naut) |
| 1 x | Quadcopter Q50 Kit Carbon Fiber |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Allen wheel collar M4x6 |
| 1 x | Adapter 3,2 mm M8 |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | 5 mm Prop Adapter M6 |
| 1 x | 2 mm Prop Adapter M5 |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | Adapter 5,0 mm M8 |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Motor Mega AC 16/15/05 CE F5J |
| 1 x | Frontal Adapter for AXI53xx |
| 1 x | Motor Mega AC 16/15/03 |
| 1 x | PYRO 600-11 |
| 1 x | Motor Mega AC 16/10/03 RACE |
| 1 x | Motor Mega AC 16/15/02 |
| 1 x | PYRO 800-48 Long Axi |
| 1 x | Motor Mega AC 22/45/02 E |
| 1 x | AXI 2814/10 V2 |
| 1 x | KIRA FAI 5F5/4s |
| 1 x | KIRA 480-43 5,2:1 |
| 1 x | PHASOR RACE 2035/2100 2D |
| 1 x | Motor MVVS 2.0/1120 |
| 1 x | Rocket D3-P |
| 1 x | Swashplate metal LAMA |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | PPM Encoder Module |
| 1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
| 1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
| 1 x | NF-3 RC set |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | Carbon plate 350x150x2.0 mm |
| 1 x | XH LiPo extension lead |
| 1 x | Tool for entel |
| 1 x | Soldering PCBs 8pin, 5 pieces |
| 1 x | XH female balance (7S) connector (2 pcs) |
| 1 x | XH female balance (9S) connector (2 pcs) |
| 1 x | XT-30 connector (pair) |
| 1 x | Red 4 mm connector holder |
| 1 x | Z Bender - S Type Tool |
| 1 x | Wing conexion 2 servos Futaba 50 cm |
| 1 x | Wing conexion 2 servos JR/Graupner 50 cm |
| 1 x | XH male balance (3S) connector (2 pcs) |
| 1 x | XH male balance (7S) connector (2 pcs) |
| 1 x | Glases Nimbus "Black" |
| 1 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Connectors DEANS (T) |
| 1 x | Connector CAN 15 |
| 1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Tube Pitot to PIXHAWK |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Sheet Depron Aero 1250x800x3 mm |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Teflon rollers 80 mm x 15 mm Diam. |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Jet Afterburner Simulator NF-Jet3 YSW |
| 1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | Carbon plate 500x400x2.0 mm ISOTECH |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Wheel collar 5 mm Ø (4 uds) |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Carbon plate 350x150x5.0 mm |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | 20x200 mm battery rings |
| 1 x | NF-2 RC set |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Marker ties (20 pcs) |
| 1 x | Carbon plate 550x350x1.0 mm ECOTECH |
| 1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | Spikes Band (5 m) |
| 1 x | Fiberglass 25 g/m² 5000x1270 mm |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
| 1 x | Tape GFK 50 mm |
| 1 x | Carbon plate 350x150x2.5 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | X-RAY Micro QR (Tail Tube) |
| 1 x | Fascination 3600 mm, Canopy (Top Model) |
| 1 x | Kavan Car 25% nitro 1l |
| 1 x | F450/550 Quadcopter, landing gear |
| 1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
 |
| 10,351.60EUR |
