| 1 x | Interface Jack Adapter IKARUS |
| 1 x | Dremel PERMAGRIT 18 mm round lime |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | Universal Colour Paste white 50 g |
| 1 x | EC-Cutter |
| 1 x | USB Mini Camera endoscope |
| 1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
| 1 x | 3 mm Long Prop Adapter M5 |
| 1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
| 1 x | 6 mm ball link M3 (10 pcs) |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Medidor ángulos y/o incidencias |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | Short ball link M1.6 (6 uds) |
| 1 x | M3 INDUSTRIAL ball link (2 uds) |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | 5 mm Prop Adapter M6 |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Adapter 4,0 mm M8 |
| 1 x | 2,3 mm Prop Adapter M5 |
| 1 x | Angle of incidence meter |
| 1 x | 10 mm dogdrive props |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | 12 mm floating pad (49 pcs) |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
| 1 x | PCARD Wireless System |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Extension silicon 100 cm (Graupner) |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Blind nut M3 (4 pcs) |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | 3l Smoke oil |
| 1 x | Optical RPM Sensor |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
| 1 x | Blind nut M2 (10 pcs) |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 1 x | Jeti Black cap |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Extension silicon 25 cm (Graupner) |
| 1 x | White smoke canister 65 g |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | "M" set |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Circlick securite |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | SERVO HOLDER |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | |
| 1 x | Nitroverdu 500 ml |
| 1 x | 25 mm Sandpaper file |
| 1 x | Universal Colour Paste deep black 50 g |
| 1 x | Dremel PERMAGRIT thin lime |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | 55% silver electrodes (2 pcs) |
| 1 x | 100g Flux Paste for Silver Solder |
| 1 x | Ball link M3 RPA's-UAV's |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 2 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | DPSI Ampere battery backer |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | Extension silicon 35 cm male (Futaba) |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | ABS rectangular profile 12x6.0x1000 mm |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Initior Receiver FRX2 Wireless |
| 1 x | 100 mm rods set for direction control |
| 1 x | Large flex hinge (12 uds) |
| 2 x | Allen wheel collar M4x4 |
| 1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | Profile ABS half cane 8.0x1000 mm |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 1 x | Red smoke canister 100 g |
| 1 x | 200 mm extensión servo HITEC/JR |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | Fresa corte diamante Ø 1.0mm (bola) |
| 1 x | Fresa corte diamante Ø 2.35mm (lentil) |
| 1 x | Copier 2x20 cm pcs |
| 1 x | 22 mm Cut Disc Proxxon/Dremmel |
| 1 x | Round Rod 2,5x1000 mm |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | Presto SF Light Filler styrene-free (420 g) |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | Crimping tool |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 1 x | Crimping tool |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Cut tube |
| 1 x | GameCommander USB Universal |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Round Rod 1,5x1000 mm |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | CM-3 |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | 4 mm Prop Adapter M6 |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | CC 05 |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
| 1 x | BEC 3A FOXY |
| 1 x | Field folding model stand SebArt |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | Ball link M2,5 (10 pcs) |
| 1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Joint with bearing M3 22x5,5 |
| 1 x | CC 02 |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Connector CAN 15 |
| 1 x | 2 mm Prop Adapter M5 |
| 1 x | Propeller balancer |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | M2,5 Diam metal ball link V3 (2 pcs) |
| 1 x | Ball link M3 (10 pcs) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Circlick securite |
| 1 x | Short ball link M3 (6 uds) |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | M2 5Diam short black ball link V2 (2 pcs) |
| 1 x | CC 03 |
| 1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Straightened rod Ø 7.0 mm x 1000 mm |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | 3 mm Short Prop Adapter M5 |
| 1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Long ball link M1.6 (6 uds) |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Propeller balancer |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Ball link M3 (10 pcs, flat ball) |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | M3/5Diam metal ball link V3 (2 pcs) |
| 1 x | Adapter 3,0 mm M6 |
| 1 x | Adapter 4,0 mm M6 |
| 1 x | Joint with bearing M2,5 22x5,5 |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | M2,5 5Diam black ball link V2 (2 pcs) |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | DPS Switch JR/JR |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | Ball link M1.6 (6 uds) |
| 1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
 |
| 4,198.65EUR |
