| 1 x | Softshell Hispano Aviación |
| 1 x | Vest clothes Hispano Aviación |
| 2 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | Canopy Latch |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
| 1 x | Partall paste 650 g |
| 1 x | Angle support XT60 conector |
| 1 x | CC 01 |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Connector CAN 15 |
| 1 x | Paint gun for sprays |
| 1 x | Round Rod 5,0x1000 mm |
| 2 x | Premium servo extension 100cm |
| 1 x | Cinta Goldfix 1m |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 2 x | Extension silicon 30 cm female (Graupner) |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | Actuador lineal HLS12-100210-7.4v |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | Futaba Female 40 cm extension |
| 2 x | Ferrita 14x8x5.5 mm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 2 x | Extension silicon 50 cm (Graupner) |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 2 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 2 x | Extension 30 cm (Futaba) |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | Rubber profile 10-2 mm 2M |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Profile ABS triangular 6.0x1000 mm 90º |
| 1 x | Cable set PREMIUM , fuselage/wing one4one |
| 1 x | Blue silicone 0,5 qmm wire (50 m) |
| 1 x | Spinner plastic red fixed propeller 30 mm |
| 2 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Spinner INO 57 mm Chrome (Imitacion metal) |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Blue smoke canister 100 g |
| 1 x | 89 mm INO spinner (carbon imitation) |
| 2 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 2 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Mixers smoke bombs AX-60 (5 pcs) |
| 2 x | "S" set for boats |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Spinner INOVA 102 mm Black |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 2 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | F3A carbon 85 mm spinner for AXI |
| 1 x | White smoke canister 140 g |
| 1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
| 1 x | Remote electric ignition system |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | F3A carbon 85 mm spinner for Hacker Q-80 |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Plastic caps for AIR BURTS (30 pcs) |
| 1 x | 57 mm white plastic spinner for fixed propeller / 4,0 mm axi |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | Conector Servo female 4 pines |
| 1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
| 1 x | Connectors banna oro 3,5 mm (M/F) |
| 1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
| 1 x | Extension silicon 100 cm (Graupner) |
| 1 x | Extension lead 15 cm Multiplex |
| 1 x | Cabel "Y" 15 cm |
| 1 x | PIX Hawk with accesories |
| 1 x | Circlick securite |
| 1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
| 1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
| 1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 1 x | Sanyo TX Battery Eneloop 9,6 V 2500 mAh |
| 1 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
| 1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
| 1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
| 1 x | 10m servo "Premium" wire (white/red/blue) |
| 1 x | Towing hook <3m |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
| 1 x | Ferrita con funda |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
| 1 x | Bungee HLG Premium |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Extension silicon 100 cm (Futaba) |
| 1 x | Extension 15 cm (Futaba) |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 1 x | Hardener Aero EPH 161 (250 g) |
| 1 x | Epoxy Resin L (2.5 Kg) |
| 1 x | Xplorer2 anemometro |
| 2 x | Xplorer3 anemometro |
| 1 x | resin-hardener package L-385 with hardener H-385 |
| 1 x | White gelcoat 1 Kg |
| 1 x | Extension silicon 10 cm (Futaba) |
| 1 x | Tester LiPo/LiIon/LiMn/LiFe |
| 1 x | Extension silicon 30 cm male (Futaba) |
| 1 x | Mould Resin P 10 kg |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
| 1 x | Cabel "Y" 30 cm (Futaba) |
| 1 x | Extension 100 cm (Futaba) |
| 1 x | resin-hardener L-385 H-385 (5000 g) |
| 1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 1 x | resin-hardener L-385 H-385 (1250 g) |
| 2 x | Cable S.BUS 3 salidas 300 mm |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
| 1 x | Extension silicon 30 cm male (Graupner) |
| 1 x | Hardener P-25, canister 2.5Kg |
| 1 x | Extension silicon 75 cm (Graupner) |
| 1 x | Futaba male 40 cm extension |
| 1 x | Extension silicon 25 cm (Graupner) |
| 1 x | 200 mm extensión servo HITEC/JR |
| 2 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
| 1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
| 1 x | Extension silicon 75 cm (Futaba) |
| 1 x | Extension 90 cm (Futaba) |
| 1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
| 1 x | Extension silicon 50 cm (Futaba) |
| 1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
| 1 x | Xplorer4 anemometro |
| 1 x | Extension PVC 150 cm (Graupner) |
| 1 x | Sanyo TX Battery Eneloop 9,6 V Futaba |
| 1 x | Sanyo RX Battery Eneloop 6,0 V JR |
| 1 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
| 1 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
| 1 x | Sanyo RX Battery Eneloop 6,0 V JR |
| 1 x | Sanyo RX Battery Eneloop RX 4,8 V Futaba |
| 1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
| 1 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
| 1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
| 1 x | 100m servo "Premium" wire (white/red/blue) |
| 1 x | Green silicone 0,25 mm² wire (25 m) |
| 1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
| 1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
| 1 x | Protective Cover for wires Ø 6 mm 1000 mm |
| 1 x | Green silicone 0,25 qmm wire (50 m) |
| 1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
| 1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
| 1 x | Black silicone 0,25 mm² wire (25 m) |
| 1 x | 10 mm Quick clamp_L (6 pcs) |
| 1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
| 1 x | LOWER TOW HOOK |
| 1 x | Initior Transmitter FTX2 Wireless |
| 2 x | Spinner plastic white fixed propeller 51 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Parachute expulsion foam |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | F3A carbon 80 mm spinner for Spark EVO |
| 1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
| 1 x | Fixed launching hook |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Spinner plastic white fixed propeller 45 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Blue smoke canister 140 g |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | 102 mm INO spinner (carbon imitation) |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
| 1 x | Nut for 515/518/519 spinner special for Hacker |
| 1 x | Spinner INOVA 45 mm White |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
| 1 x | 82 mm INO spinner (carbon imitation) |
| 1 x | 70 mm INO spinner (carbon imitation) |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | PowerBox DigiSwitch V2 MPX/JR |
| 1 x | XH female balance (2S) connector (2 pcs) |
| 1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
| 1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
| 1 x | 63 mm INO spinner (carbon imitation) |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
| 1 x | BlueCom™ Adapter (Android / WP) |
| 1 x | Mobile Terminal |
| 1 x | USBCOM 5i |
| 1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
| 1 x | Support Pitot JETI |
| 1 x | Marker ties (20 pcs) |
| 1 x | DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS |
| 1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
| 2 x | DUPLEX 2,4GHz MRPM-AC EX |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 2 x | DUPLEX 2.4EX MT 125 temperature sensor |
| 1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
| 1 x | DSM 10 Dual Switch Mixer |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
| 1 x | Rudder 2_Tray 3~3.5 inch |
| 1 x | M3-M4 rubber washer (8 pcs) |
| 1 x | PowerBox MagSensor black connector SRS/Champion |
| 1 x | Sensor DUPLEX 2.4EX MUI 200 |
| 1 x | DUPLEX MUI 50 Sensor |
| 1 x | |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | 500 ccm complete gasoline fuel tank |
| 1 x | 3-blades 20x12 carbon prop Super Silence |
| 1 x | 13 mm wing servo holder |
| 1 x | Electric spoiler 300 mm (2 pcs) |
| 1 x | Receiver RFA05 5Ch compatible FUTABA |
| 1 x | Tester LiPo/LiIon/LiMn/LiFe |
 |
| 7,840.86EUR |
