| 2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 3 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Spikes Band (5 m) |
| 2 x | Tape GFK 38 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Cinta Goldfix 1m |
| 3 x | Glases Nimbus |
| 2 x | SE Ring 250 mm (2 pcs) |
| 3 x | Glases Moritz |
| 2 x | Tape GFK 25 mm |
| 2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 2 x | Glases Ace |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 2 x | SE Ring HACKER 300 mm (2 pcs) |
| 2 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
| 2 x | 20x200 mm battery rings |
| 1 x | SE Ring 350 mm (2 pcs) |
| 2 x | Glases Innovation Plus |
| 2 x | 20x1000 mm Ring Strap Back To Back |
| 2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 2 x | Marker ties (20 pcs) |
| 2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 2 x | SE Ring 450 mm (2 pcs) |
| 2 x | Ring 320 mm length (5 pcs) |
| 3 x | Glases Nimbus "Black" |
| 1 x | Tape GFK 50 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 2 x | Glases Flitemaster |
| 2 x | Glases Stratus |
| 1 x | Glases Aspen |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | SE Ring 480 mm (2 pcs) |
| 2 x | SE Ring 300 mm (2 pcs) |
| 1 x | Parachute BACKUP X100 |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
| 1 x | |
| 2 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 2 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
| 1 x | Servo Mount S (red) |
| 1 x | Secraft Fuel system v2, red color |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 2 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
| 1 x | JIVE 80+LV Esc |
| 1 x | Grasa 2 ml |
| 1 x | Fiberglass plate 1200x1000x0,2 mm |
| 1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
| 2 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
| 1 x | Carbon plate 350x150x5.0 mm |
| 1 x | Fiberglass plate 350x150x2.0 mm |
| 1 x | Carbon plate 350x150x2.5 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | KIRA 480-34 5,2:1 |
| 1 x | Fiberglass plate 620x540x3,2 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 2 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | KIRA 600-17 |
| 1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
| 1 x | Carbon plate 550x350x4.0 mm ECOTECH |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
| 1 x | KIRA 600-16 |
| 1 x | KIRA 400-27 |
| 1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
| 1 x | KIRA 480-26 5,2:1 |
| 3 x | Chopped glass fibre strands 3 mm |
| 1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
| 1 x | Carbon plate 550x350x1.0 mm ECOTECH |
| 2 x | Film release agent PVA 25 ml |
| 1 x | KIRA 500-30 6,7:1 |
| 1 x | Gearbox KPG27 5,2:1 |
| 2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 2 x | Fiberglass plate 350x150x1.0 mm |
| 1 x | ABS 500 x 400 x 1 mm (white) |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 2 x | Glass fabric 25 g/m² (1 m²) |
| 1 x | Rubber profile 8-2 mm 2M |
| 1 x | Pilatus PC-21 50E BLUE/WHITE (SebArt) |
| 1 x | Profile ABS triangular 6.0x1000 mm 90º |
| 2 x | Ball Bearing Oil 25 ml |
| 2 x | Xplorer3 anemometro |
| 1 x | Motor DLE 430 cc - Paramotors |
| 1 x | Chopped glass fibre strands 3 mm |
| 2 x | Foam plastic plates (310x210x2 mm) |
| 1 x | Glass fabric 25 g (2 m²) |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Profile ABS half cane 7.0x1000 mm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | Propeller Pleg CAM Carbon 12x6.5 |
| 1 x | Propeller Pleg CAM Carbon 11x10 |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | Propeller Pleg CAM Carbon 10x6 |
| 1 x | Rubber profile 6-2 mm 2M |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | 28 mm turnbuckle |
| 2 x | 2,3 mm Prop Adapter M6 |
| 1 x | 12 mm mast holder |
| 1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
| 1 x | 3 mm Leader (L 100 mm) |
| 1 x | Propeller Pleg CAM Carbon 12x10 |
| 1 x | Propeller Pleg CAM Carbon 11x5 |
| 1 x | Propeller Pleg CAM Carbon 15x8 |
| 1 x | Propeller Pleg CAM Carbon 10x12 |
| 1 x | Propeller Pleg CAM Carbon 13x10 |
| 2 x | "L" servo arm 65x49 mm (2 pcs) |
| 2 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
| 2 x | 3.2 mm Prop Adapter M8 |
| 1 x | 10 mm portholes (10 pcs) |
| 2 x | 2,3 mm Prop Adapter M6 |
| 1 x | 29,0 mm propeller (left propeller) |
| 1 x | 12 mm portholes (10 pcs) |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | 3.2 mm Prop Adapter M6 |
| 1 x | 3,2 mm Prop Adapter M8 |
| 1 x | 2.3 mm Adapter for 30 mm spinners |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | 31,0 mm propeller (rigth propeller) |
| 1 x | 15x7 tree blades propeller LEFT |
| 2 x | 14 mm portholes (10 pcs) |
| 1 x | 300x4 mm M4 shaft ship |
| 2 x | 10 mm Prop Adapter M12 |
| 1 x | 15x7 tree blades propeller |
| 2 x | 290 mm M4/4 mm Prop shaft |
| 2 x | 3 mm Prop Adapter M6 |
| 1 x | 290 mm 8x4 M4 shaft ship |
| 1 x | 12x8 tree blades propeller |
| 1 x | 2 mm Prop Adapter M6 |
| 1 x | Servo M2x9/16 screw (4 pcs) |
| 1 x | Glow Plug Clip 1.3 Ah |
| 1 x | Fuel dot blue |
| 1 x | Servo Bolt M3x6 (8 pcs) |
| 1 x | Battery LiPo GRE18 600 mAh 7.4v |
| 1 x | Charger SKY RC e680 |
| 1 x | XT60 Connector with Holder Male 2pcs |
| 1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
| 1 x | Ciano KAVAN Thin 20g |
| 1 x | 10 mm aluminium spinner (Kavan) |
| 1 x | Fuel bottle 500 ccm |
| 1 x | Pin hinge 34x16 mm (10 uds) |
| 1 x | Fiberglass plate 350x150x0.3 mm |
| 1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
| 1 x | KIRA 480-43 5,2:1 |
| 1 x | PYRO 650-53L EJE LARGO |
| 1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
| 1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
| 1 x | DOMINO 46-55 Trainer 1583 mm |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | Small Crow DLE-170M |
| 1 x | Motor DLE 200cc Std |
| 1 x | Silent-blocks DLE 170M |
| 1 x | Motor DLE 200cc Premium Muffler |
| 1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
| 1 x | Receptor DUPLEX REX R9 Slim |
| 1 x | Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX |
| 1 x | Suport PITOT |
| 1 x | DUPLEX R12 EPC receiver 2,4GHz |
| 1 x | DUPLEX 2.4GHz GPS |
| 1 x | TWIST planeador gomas |
| 1 x | Fuel line plugs (Red) |
| 1 x | TX Tray V1 Hand Rests only |
| 1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
| 1 x | KIRA 600-22 6,7:1 |
| 1 x | Fiberglass plate 620x540x0,2 mm |
| 1 x | PYRO 600-11 |
| 1 x | Adapter SPEED 480 whit axle short |
| 1 x | KONDOR 15-92 |
| 1 x | KIRA 480-31 5,2:1 |
| 1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
| 1 x | PVC grid diagonal 290x185x0.32 mm |
| 1 x | Fiberglass plate 350x150x3.0 mm |
| 2 x | KIRA 500-26 6,7:1 |
| 1 x | Glass fibre braided sleeve (45mm) roll 20m |
| 2 x | KIRA 500-36 6,7:1 |
| 1 x | Glass fabric 390 g/m² aero,10x1m |
| 1 x | KIRA 600-20 |
| 1 x | KIRA 480-43 |
| 1 x | PYRO 700-45 Long Axi |
| 1 x | KIRA 480-38 5,2:1 |
| 1 x | Adapter SPEED 500/600 |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | BULLIT Wing 1095 mm |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | Fiberglass plate 350x150x2.5 mm |
| 1 x | LA500 pilot-seat set |
| 1 x | Xplorer4 anemometro |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | MAMBO 17 |
| 1 x | Receiver DUPLEX R5L EX 2.4 GHz |
| 1 x | DUPLEX MRMP Hall EX |
| 1 x | DUPLEX R7 receiver REX Assist |
| 1 x | MRPM-AC revolution sensor |
| 1 x | MT 125 temperature sensor |
| 1 x | DUPLEX 2,4GHz MRPM EX |
| 1 x | DUPLEX R14 receiver 2,4GHz |
| 1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
| 1 x | DUPLEX R7 receiver 2,4GHz |
| 1 x | DUPLEX 2.4 EX MVario2 |
| 1 x | DUPLEX MUI 30 Sensor |
| 1 x | DUPLEX USB Adapter |
| 1 x | DUPLEX R12 receiver REX Assist |
| 1 x | DUPLEX R7 REX receiver 2,4GHz A40 |
| 1 x | Battery voltage telemetry |
| 1 x | DUPLEX R7 REX receiver 2,4GHz |
| 1 x | DUPLEX 2.4EX Expander E4 |
| 1 x | DUPLEX 2.4EX MAlti (Rev.2) |
| 1 x | DUPLEX 2.4EX RC Switch |
| 1 x | Sensor DUPLEX 2.4EX MUI 200 |
| 1 x | Receiver DUPLEX REX 3 2.4 GHz |
| 1 x | DUPLEX Satellite receiver Rsat 900 |
| 1 x | DUPLEX 2.4EX MT 125 temperature sensor |
| 1 x | DUPLEX 2.4EX Expander E2 |
| 1 x | DUPLEX 2.4EX MUI 75 |
| 1 x | DUPLEX R18 EX 2,4GHz + Rsat2 |
| 1 x | Receiver DUPLEX R3L EX 2.4 GHz |
| 1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
| 1 x | Receiver GRAUPNER GR-12 HoTT |
| 1 x | DUPLEX MUI 50 Sensor |
| 1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 2 x | Axle for motor A50-L |
| 2 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
| 2 x | Axle for motor A20-S (3 uds) |
| 2 x | Cable adapter iCharger |
| 2 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 1 x | Boat 43 mm (5 pcs) |
| 1 x | Boat vents 10mm (2pcs) |
| 1 x | Propeller Pleg CAM Carbon 7x4.5 |
| 1 x | Propeller Pleg CAM Carbon 6x6 |
| 1 x | Propeller Pleg CAM Carbon 16x8 |
| 1 x | Propeller Pleg CAM Carbon 7x4 |
| 1 x | Spinner propeller pleg. 45 mm / 5,0 mm |
| 1 x | Spinner plastic white fixed propeller 30 mm |
| 1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
| 1 x | Capstan of plastic 125x72x45 mm |
| 1 x | ALU servo arm 3 mm shaft |
| 1 x | Cancamo con aro 16/6.5 mm (10 pcs) |
| 1 x | Klumpblock (Plastik), Höhe 4 mm, 2 Rille, 20 Stück |
| 1 x | Esc master MEZON 120 Lite |
| 1 x | A30-M/L/XL Backmountset complete |
| 1 x | A50 Backmountset complete V3/V4 |
| 1 x | Esc MasterBasic 70SB |
| 1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
| 1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
| 1 x | ANGEL 48" pp red/blue/white |
| 2 x | Battery charging cable XT60 |
| 1 x | A50 Backmountset complete |
| 1 x | EDF Stream-Fan 110mm kv780 |
| 1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
| 1 x | Barandilla Ms 10x250 mm (2 pcs) |
| 1 x | Brass wire 0.5 mm (25 m) |
| 1 x | Cadena 1.0mm x 1 m |
| 1 x | Cabestrante plastico 5x6 mm (10 pcs) |
| 1 x | Bocina Ms 18 mm (3 pcs) |
| 1 x | Cable pass Ms 9x5 mm (10 pcs) |
| 1 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
| 1 x | Propeller Pleg CAM Carbon 9.5x5 Reverse Rotation |
| 1 x | Propeller Pleg CAM Carbon 18x7 |
| 1 x | Propeller Pleg CAM Carbon 8x5 M6 |
| 1 x | Propeller Pleg CAM Carbon 8x4.5 |
| 1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
| 1 x | Central piece 52 mm + 2,5º |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | Cannon 12.7 cm (2 pcs) |
| 1 x | Cabestrante 13 x12 mm (5 pcs) |
| 1 x | Cannon 53/6 mm |
| 1 x | Boat 140 mm |
| 1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
| 1 x | A50 Backmountset complete |
| 1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
| 1 x | A60-6XS V4 28-Pole |
| 1 x | 20-25mm Servo Arm |
| 1 x | A40 Backmountset complete |
| 1 x | Esc MasterBasic 90 Opto |
| 1 x | A60 Motor Mount Alu complete set |
| 1 x | Lipo KAVAN 5000 mAh 11.1v 40/80C |
| 1 x | Esc MasterBasic 40SB |
| 1 x | Charger ISDT 608AC 200W |
 |
| 34,796.93EUR |
