| 1 x | Quadcopter Q50 Kit Carbon Fiber |
| 1 x | Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud) |
| 1 x | Propeller set 400 (2R+2L) |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | 40 mm white plastic spinner for fixed propeller |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | Circlick securite |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Glases Ace |
| 1 x | Protective Cover for wires Ø 6 mm 1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 1 x | Tube Pitot to PIXHAWK |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
| 1 x | Glases Innovation Plus |
| 1 x | |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Protective Cover for wires Ø 6 mm 1000 mm |
| 2 x | Glases Aspen |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Protective Cover for wires Ø 10 mm 1000 mm |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Optical RPM Sensor |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm) |
| 1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Cable Cargador FUTABA |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | PPM Encoder Module |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
| 1 x | CC 01 |
| 1 x | Cable set PREMIUM, fuselage/wing |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | PIX Hawk with accesories |
| 1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Black silicone 0,25 mm² wire (25 m) |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 2 x | Sun Cover PC 21 XXL (JMB Jets) |
| 1 x | Spinner plastic white fixed propeller 30 mm |
| 1 x | 36 mm red plastic spinner for fixed propeller |
| 1 x | 42 mm black plastic spinner for fixed propeller |
| 1 x | Pilot "Goose" (Slimline) |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
| 1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Protective Cover for wires Ø 20 mm 1000 mm |
| 1 x | 50 mm black plastic spinner for fixed propeller |
| 2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | CC 05 |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 2 x | CC 02 |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | 1/6 Pilot "Garry" |
| 2 x | Spinner fixed propeller 60 mm / 5,0 mm |
| 1 x | Socket head long ball link M3 (2 uds) |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Short ball link M1.6 (6 uds) |
| 1 x | Field folding model stand SebArt |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Ball link M3 RPA's-UAV's |
| 1 x | Crimping tool |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | M2,5 5Diam black ball link V2 (2 pcs) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | Round Rod 3,0x1000 mm |
| 1 x | Connectors banna gold 5,5 mm (M/F) |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Dust collector for mould cleaning |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Vacuum pump P1-N |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | 58 mm micro servo cover |
| 1 x | Servo GO-1013 MG 3.8kg |
| 1 x | Servo GO-1081 MG 45 kg.cm 0.085s/60º |
| 1 x | 90x75 mm standart servo cover |
| 1 x | Futaba BLS152 - Upper Case |
| 1 x | Servo FUTABA BLS 276SV |
| 1 x | Servo FUTABA BLS 272SV |
| 1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
| 1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
| 1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
| 1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
| 1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
| 1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
| 1 x | Servo FUTABA SBL 471 SV |
| 1 x | Servo FUTABA S 3071 HV S-Bus |
| 1 x | 10-15mm Servo Arm HITEC |
| 1 x | Servo FUTABA BLS175 SV |
| 1 x | Servo FUTABA S 9670 SV |
| 1 x | SERVO S9177SV HV S-Bus2 Programable |
| 1 x | Futaba 3010 - Gear Set |
| 1 x | Futaba BLS255/272/471SV - Gear Set |
| 1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
| 1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
| 1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
| 1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
| 1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
| 1 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
| 1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
| 1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
| 1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
| 1 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
| 1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
| 1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
| 1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
| 1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
| 1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
| 1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
| 1 x | Red aluminium double servo arm FUTABA 40 mm M3 F3A |
| 1 x | Crystal Universal RX 35.140 Ch 74 |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Crystal Universal TX 35.140 Ch 74 |
| 1 x | GameCommander USB Universal |
| 1 x | Micro Crystal RX 35.010 Ch 61 |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Spinner Alumin. fixed propeller 30 mm / 2,3 mm |
| 1 x | Spinner NUT 1/4x28 |
| 1 x | ABS 500 x 400 x 1 mm (white) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Spinner NUT M5 |
| 1 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Spinner NUT M8x1,25 |
| 1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
| 1 x | Spinner NUT M6 |
| 1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | Three-function control switch by FUTABA |
| 1 x | Receiver bed (Blue) |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | Axle wheel with accesories |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | M3 INDUSTRIAL ball link (2 uds) |
| 1 x | DOMINO 46-55 Trainer 1583 mm |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
| 1 x | 45 mm white plastic spinner for fixed propeller |
| 1 x | Transmitter Balancer SPK DX-8 |
| 1 x | Teacher-student connector T12FG/FX-30 |
| 1 x | Futaba Neckstrap |
 |
| 6,574.69EUR |
