| 2 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | Paint gun for sprays |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
| 1 x | Mixers smoke bombs AX-60 (5 pcs) |
| 1 x | Horn for flap control (1 pcs) |
| 2 x | SE Ring 360 mm (2 pcs) |
| 1 x | ABS rectangular profile 12x6.0x1000 mm |
| 1 x | Green smoke canister 140 g |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | 3l Smoke oil |
| 2 x | "M" set |
| 2 x | Marker ties (20 pcs) |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | Adjustable brass horn threaded M3 |
| 1 x | Horn mando small (2 pcs) |
| 2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Plastic caps for AIR BURTS (30 pcs) |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | Extra-long adjustable aluminium control horn 2,8x34 |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Horn 5/10 with M2 Bearing |
| 3 x | Smoke set "Glider" |
| 1 x | Glases Moritz |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | Parachute expulsion foam |
| 1 x | Circlick securite |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | BEC 3A FOXY |
| 1 x | Short ball link M2 (6 uds) |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | BALSA triangular 8x8x1000 mm |
| 2 x | Cabling for Fox MDM1 wings |
| 1 x | Support XT60 conector (2 pcs) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | 100m servo "Premium" wire (white/red/blue) |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Black silicone 1,0 qmm wire (50 m) |
| 1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
| 1 x | Cable set PREMIUM , fuselage/wing one4one |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | Protective Cover for wires Ø 6 mm 1000 mm |
| 1 x | Green silicone 0,25 qmm wire (50 m) |
| 1 x | Protective Cover for wires Ø 6 mm 1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
| 1 x | Protective Cover for wires Ø 10 mm 1000 mm |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | 140 mm rods set for direction control |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | 50m servo "Premium" wire (white/red/blue) |
| 1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
| 1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
| 1 x | 12 mm floating pad (49 pcs) |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | 200m servo "Premium" wire (white/red/blue) |
| 2 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
| 1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
| 1 x | Green silicone 0,25 mm² wire (25 m) |
| 1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
| 1 x | Allen wheel collar M3x5 |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Sun Cover PC 21 XXL (JMB Jets) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 2 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | Kwik link AL M4 con Clip (2 pcs) |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Clip mini fixing for wing (2 pcs) |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | 80 mm rods set for direction control |
| 1 x | Angled clevis with threaded rod M3 |
| 2 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Steering lever |
| 2 x | Motor mount VANQUIST 48" F3A |
| 1 x | Blade Holder Full (4 blades) |
| 1 x | Bearing 3x6x2,5 |
| 1 x | Tail boom |
| 2 x | Battery plate |
| 2 x | Grub screw M3x3 shouldered (2 pcs) |
| 1 x | Head core bushing |
| 1 x | MAMBO 17 |
| 1 x | Head spacer |
| 1 x | |
| 1 x | Head lower part |
| 2 x | Rotor Mast |
| 2 x | |
| 2 x | Side Plate |
| 1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
| 1 x | Balls 4 mm |
| 1 x | Metalic nose for PROJETI |
| 1 x | Horns set HS-65HB/MG, 5065MG |
| 1 x | Solvent Plasti Dip 1000 ml |
| 2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | SPARK Switch 7.4v |
| 1 x | EWC6 40 cm wing connector |
| 1 x | Three-position switched channel, short |
| 1 x | Female connector for 16 pines AWG |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
| 1 x | Support Pitot JETI |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Light System |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Support Filtro FESTO |
| 1 x | Screw M3x16 (10 pcs) |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | Tape GFK 25 mm |
| 1 x | Blue smoke canister 100 g |
| 2 x | 20x1000 mm Ring Strap Back To Back |
| 2 x | SE Ring 350 mm (2 pcs) |
| 1 x | Smoke set "M" |
| 1 x | Red smoke canister 100 g |
| 1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Spikes Band (5 m) |
| 1 x | Yellow smoke canister 100 g |
| 1 x | White smoke canister 65 g |
| 1 x | 20x200 mm battery rings |
| 2 x | "S" set for planes |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | Tape GFK 50 mm |
| 2 x | White smoke bombs AX-9 (10 pcs) |
| 2 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Red smoke canister 65 g |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Red smoke canister 140 g |
| 1 x | Tape GFK 38 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Remote electric ignition system |
| 1 x | Blue smoke canister 140 g |
| 2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | "S" set for boats |
| 1 x | White smoke canister 100 g |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 1 x | EWC3 40 cm wing connector |
| 1 x | wing/fuselage connector for 3 pines AWG 20-24 |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
| 1 x | wing/fuselage connector for 16 pines AWG 20-24 |
| 1 x | Male connector for 20 pines AWG |
| 1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | Male connector for 6 pines AWG |
| 1 x | Female connector for 12 pines AWG |
| 1 x | Connector CAN 15 |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | Female connector for 20 pines AWG |
| 1 x | SPARK Switch 12v |
| 1 x | PWC4 wing/fuselage connector for 4 servos |
| 1 x | Male connector for 10 pines AWG |
| 1 x | Female connector for 10 pines AWG |
| 1 x | Male connector for 16 pines AWG |
| 2 x | EWC3 100 cm wing connector |
| 1 x | DPS Switch JR/JR |
| 1 x | Female connector for 6 pines AWG |
| 1 x | FX three-position switched channel, long |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Angle support XT60 conector |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Recessed MPX connector support (6 pcs) |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Extractor piñones 2.3/3.2 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 2 x | Soporte grifo FESTO vertical (1 pcs) |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Tapping Screw M2.2x65 (10 pcs) |
| 1 x | Socket Head Screw M2x12 |
| 1 x | Titanium M3x0,5x6 mm Flat Head screw (4 pcs) |
| 1 x | Threaded insert M5 (10 pcs) |
| 1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
| 1 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | Screw M2.5x5 (10 pcs) |
| 2 x | Screw M3x5 (10 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Transmitter Balancer Futaba T-10CG |
| 1 x | Futaba Aero Large Case - Internal Foam |
| 1 x | Switch moment button, 2 functions, long FUTABA |
| 1 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
| 1 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
| 1 x | Pan Head Screw M2x8 PH countersunk head |
| 1 x | Nylon Screw M5x30 |
| 1 x | Pan Head Screw M2x6 PH |
| 1 x | Nylon Screw M4x20 |
| 1 x | Screw M3x30 (10 pcs) |
| 1 x | Screw M4x12 (10 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Fiberglass plate 350x150x2.5 mm |
| 1 x | Carbon plate 350x150x4.0 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Foam plastic plates (310x210x8 mm) |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Fiberglass plate 1200x1000x0,2 mm |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
| 1 x | 10 mm Quick clamp_L (6 pcs) |
| 1 x | Neck strap Double V2 |
| 1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
| 1 x | Tray for FUTABA 18 SZ |
| 1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
| 1 x | Switch Cap M (blue) |
| 1 x | Maleta transporte FUTABA 10PX |
| 1 x | Receiver bed (Blue) |
| 1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
| 1 x | Switch Cap L (silver) |
| 1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
| 1 x | Silicone black 1,5 qmm wire ( 1 m) |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Monokote BLANCO jet (1.8x0.65m) |
| 1 x | Blade Holder (3 blades) |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 2 x | VIPER JET G2 Esq. 3 Orange/Black |
| 1 x | VIPER JET G2 Esq. 2 Red/White/Silver |
| 1 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
| 1 x | TX-Tray V1 (L) (Red) |
| 1 x | Yellow smoke canister 65 g |
| 1 x | Retract undercarriage |
| 1 x | Head core |
| 1 x | Nut M2 securing |
| 1 x | Blades 330mm |
| 1 x | Blade holder center |
| 1 x | Baering 3x8x4 |
| 1 x | Rotorshape Elevator |
| 1 x | Head runner |
| 1 x | Blade holder upper |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Oratex White 2m |
| 1 x | Fuselage Autogyro RAINBOW |
| 1 x | Oratex Natural White 20m |
| 1 x | Oracover Yellow CUB 10 m |
| 1 x | Oracover Black 10 m |
| 1 x | Landing gear axle Ø 4 mm (2 uds) |
| 1 x | Castrol Oil A747 1l |
| 1 x | VIPER JET G2 Esq. 2 White/Red |
| 1 x | VIPER 1.7 Electric break wheels + structure |
| 1 x | 3 blades set |
| 1 x | Optotronix Aurora Plug |
| 1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
| 1 x | Joint with bearing M3 22x5,5 |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Rear crankcase DA-50R |
| 1 x | Male connector for 12 pines AWG |
| 1 x | Magnetic Interruptor MULTIPLEX |
| 1 x | Support Antena 2.4 Ghz (2 pcs) |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | NF-3 RC set |
| 1 x | Woodruff key for DA50/85/100/150 and DA 200 |
| 1 x | JETImodel DPS 40 |
| 1 x | Initior Transmitter FTX2 Wireless |
| 1 x | 5 mm M2 variable inclined horn |
| 1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
 |
| 21,073.56EUR |
