| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 2 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | ABS I Strip 20x10x1000 mm |
| 1 x | Round Rod 5,0x1000 mm |
| 1 x | Round Rod 1,25x1000 mm |
| 2 x | ABS I Strip 10x5x1000 mm |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | Round Rod 1,5x1000 mm |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | Round Rod 2,5x1000 mm |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | One touch canopy lock |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Covered closure or fairings |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 2 x | Pine wood slat 10x10x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 2 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 3 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 2 x | White smoke bombs AX-9 (10 pcs) |
| 1 x | Smoke set "M" |
| 2 x | "M" set |
| 1 x | Initior Transmitter FTX2 Wireless |
| 1 x | Green smoke canister 100 g |
| 1 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | Green smoke canister 140 g |
| 2 x | Red smoke canister 65 g |
| 1 x | Blue smoke canister 100 g |
| 1 x | Red smoke canister 140 g |
| 1 x | 3l Smoke oil |
| 1 x | ORACOVER Fluor red (2 m) |
| 1 x | Short ball link M3 (6 uds) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | Cockpit aluminium closing |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | 45 mm rods set for direction control |
| 1 x | Cockpit aluminium closing 4.7g |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
| 1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
| 1 x | Snap pin for micro clevis (10 uds) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Allen wheel collar M4x4 |
| 1 x | 140 mm rods set for direction control |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Sparkplug 1/4-32 EVO 10GX |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 2 x | Sparkplug Saito 400 |
| 1 x | "S" set for boats |
| 1 x | Plastic caps for AIR BURTS (30 pcs) |
| 1 x | Servo HITEC D145 SW |
| 1 x | Servo HS-5070 MH Hi Volt |
| 1 x | Servo HITEC HS-5245 MG Digi |
| 1 x | Servo HITEC HS-5475 HB Digi |
| 1 x | Servo HITEC HS-225 BB |
| 1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
| 2 x | Servo HITEC D131 MW nano |
| 1 x | Servo HITEC D951 TW |
| 1 x | Servo HITEC HS-485 HB |
| 1 x | Servo HITEC HS-5084 MG |
| 2 x | Servo HITEC HS-311 |
| 1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
| 1 x | Servo lock HS-80/81/82/85 (2 pcs) |
| 1 x | Servo HITEC HS-55 |
| 2 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | White smoke canister 100 g |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | Red smoke canister 100 g |
| 1 x | Parachute expulsion foam |
| 1 x | "S" set for planes |
| 1 x | Yellow smoke canister 100 g |
| 1 x | Sparkplug ROSSI R8 |
| 1 x | Servo NARO Max Std |
| 1 x | Towing hook |
| 1 x | Glases Nimbus |
| 1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | Battery LiFe -3000/25C-3S 9.9V |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Mudguard wheels 112/127 mm |
| 1 x | Spark plug key NGK MVVS |
| 1 x | Servo HITEC D645 MW |
| 1 x | Esc MasterBasic 55SB |
| 1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
| 1 x | Servo HITEC D954 TW |
| 1 x | Propeller 10x4,7 SlowFlyer |
| 1 x | Frontal support Speed 600 |
| 1 x | Pendulun "Special" to tank 60g |
| 1 x | Smokelance |
| 1 x | Turbina X45 H "Light Version" |
| 1 x | Turbina X45 H "compact" |
| 1 x | Turbina JetsMunt M122 NG |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Fod Guard 94x34 mm |
| 1 x | FOD Screen K45/60/70/85 |
| 1 x | Turbina JetsMunt M210TS |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Scale exhaust K45TP |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | Turbina KINGTECH K320 G5 |
| 1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
| 1 x | Axle for motor A30-XL V2 |
| 1 x | Battery charging cable XT60 |
| 1 x | Spark motor OS nº 8 |
| 1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
| 1 x | Servo Digital HITEC HS-5065 MG |
| 1 x | Servo HITEC HS-5585MH |
 |
| 17,418.51EUR |
