| 2 x | ABS tube 8.0x7.0x1000 mm |
| 2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 3 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 2 x | ABS tube 8.0x6.0x1000 mm |
| 2 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | Turbina KINGTECH K320 G5 |
| 2 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 2 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Adaptadores carga 6s JST-XH |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Conector MR-60 (pareja) |
| 2 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Crimping tool |
| 2 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | Extension MPX-MPX 20 cm |
| 2 x | ABS tube 3.0x2.0x1000 mm |
| 2 x | ABS tube 14.0x10.0x1000 mm |
| 3 x | Vasa model Catapult |
| 2 x | ABS tube 7.0x5.0x1000 mm |
| 2 x | Bungee HLG Premium |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Interface Realflight Simulator |
| 2 x | GameCommander USB Universal |
| 2 x | Simulador RealFlight RF-9.5 S (sin emisora) |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Tape GFK 25 mm |
| 3 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Tape GFK 38 mm |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | Tube Pitot to PIXHAWK |
| 1 x | SE Ring 400 mm (2 pcs) |
| 2 x | SE Ring 480 mm (2 pcs) |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | Trike XL motor set (motor+esc+prop) |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Profile ABS triangular 4.0x1000 mm 60º |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Gates hinge |
| 1 x | Red smoke canister 140 g |
| 1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
| 2 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Propeller POWER-PROP 13x9 Izda |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 1 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
| 1 x | Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox) |
| 2 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 2 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
| 1 x | Fiberglass tube 6/4x1000mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
| 1 x | Landing gear axle Ø 4 mm (2 uds) |
| 2 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | La Capitania di Venetia accesories |
| 1 x | Prop Shaft Adapter 5 mm/M8 "long" |
| 1 x | Motor KAVAN PRO 2225-1600 |
| 2 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
| 1 x | Motor OS 3820-1200 electric |
| 1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
| 2 x | PPM Encoder Module |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Optical RPM Sensor |
| 1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
| 1 x | Support pumb/filter Xicoy X45 |
| 1 x | Support FUEL DOT V3 |
| 1 x | G-Ring Ø3mm Ø3xØ6x3 mm |
| 1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | Frontal Adapter for AXI53xx |
| 2 x | PIX Hawk with accesories |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Servo arm with 6 mm hole to FEMA 9800A |
| 1 x | Compact on-board starting system (9525) |
| 1 x | Compact on-board starting system (9724) |
| 1 x | White spinner propeller pleg. 36 mm / 4 mm |
| 1 x | White Thread 0.50 mm x 20m |
| 1 x | wooden stairs (kit) 70 mm |
| 1 x | Windlass 67x45 mm |
| 1 x | TAKELHAKEN Ms 12x10 mm |
| 1 x | Timon madera 30 mm |
| 1 x | Landing gear axle Ø 6 mm (2 uds) |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | Metal ring front FEMA |
| 1 x | Compact on-board starting system (9715) |
| 1 x | 100 Newtons FEMA absorber |
| 1 x | Mudguard wheels 112/127 mm |
| 1 x | Wheel FEMA 127 mm / 6 mm |
| 1 x | Wheel FEMA 90 mm / 6 mm |
| 1 x | Gearwheel 9724/09 for ZG 45 |
| 1 x | Servo arm with 5 mm hole to FEMA 9810A |
| 1 x | Compact on-board starting system (9512) |
| 1 x | Servo holder for retract |
| 1 x | 300 Newtons FEMA absorber |
| 1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
| 1 x | Wheel FEMA 82 mm / 5 mm |
| 1 x | Mudguard for 140/165 mm wheels |
| 1 x | Absorver mount set for 5-10 Kg models |
| 1 x | Restrictor FESTO 3/3 mm |
| 1 x | L-shaped servo mount |
| 1 x | Wheel FEMA 112 mm / 6 mm |
| 1 x | Z-shaped servo mount |
| 1 x | Wheel FEMA 140 mm / 6 mm |
| 2 x | Landing gear axle Ø 8 mm (2 uds) |
| 1 x | Wheel FEMA 70 mm / 5 mm |
| 1 x | Wheel FEMA 165 mm / 8 mm |
| 1 x | Propeller POWER-PROP 7x7 |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Turbofan 4000 |
| 1 x | Top light Red 10mm/3V (2 pcs) |
| 1 x | Z Spinner (CN) 30mm |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | Transom 40 mm |
| 1 x | Tubo silicona transparente 7 x 3 mm (1m) |
| 1 x | Timon Met. 13 mm |
| 1 x | CC 02 |
| 1 x | Wood grids 30x100 mm (30 pcs) |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | White spinner propeller pleg. 55 mm / 6 mm |
| 1 x | White spinner propeller pleg. 50 mm / 6 mm |
| 1 x | White spinner propeller pleg. 42 mm / 4 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Z Spinner (CN) 35mm |
| 1 x | White spinner propeller pleg. 42 mm / 5 mm |
| 1 x | Z Spinner (CN) 42mm |
| 1 x | Ventilador (metal dorado) 15 x 34 mm, 2 piezas Ø 15 mm x 34 mm a |
| 1 x | Timon madera 45 mm |
| 1 x | SUPER DIMONA TC-80 |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 1 x | White spinner propeller pleg. 36 mm / 5 mm |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Top light bright 10mm/3V (2 pcs) |
| 1 x | Turbofan 1000 |
| 2 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | Tool for entel |
| 1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
| 1 x | Landing gear axle Ø 5 mm (2 uds) |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
| 1 x | Recessed MPX connector support (6 pcs) |
| 1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
| 1 x | PowerBox VRegulador 5.3v |
| 1 x | Xplorer2 anemometro |
| 1 x | Support Pitot JETI |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | A60 Motor Mount Alu complete set |
 |
| 13,548.26EUR |
