| 1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 2 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Covered closure or fairings |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 2 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Cockpit plastic closing |
| 1 x | Canopy Latch |
| 1 x | One touch canopy lock |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | SUS wire 3m (nylon coated) |
| 2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 2 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 2 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 1 x | Horn 5/20 with M2 Bearing |
| 2 x | 6 mm blue aluminium threaded horn with patella |
| 2 x | Cable with accesories |
| 2 x | Small aluminium horn red (2pcs) |
| 3 x | Horn 20x28,5 mm (2 pcs) |
| 2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | Horn 5/10 with M2 Bearing |
| 3 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | Cable control set |
| 2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 3 x | Small aluminium horn blue (2pcs) |
| 2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Horn for flap control (1 pcs) |
| 2 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | 20 mm carbon horn |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | SlowFlyer control horn (3 pcs) |
| 2 x | Horn 6/35 with M3 Bearing |
| 3 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | Smoke set "S" |
| 1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 1 x | Green smoke canister 100 g |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Carburator Moki S250 |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | 290x4 mm M4 shaft ship |
| 1 x | Allen wheel collar M3x3 |
| 1 x | 18m Fitting barb |
| 1 x | 280 cc gasoline fuel tank complet |
| 1 x | 102x26 Ø6.0 mm aluminium core wheel |
| 1 x | 200 mm extensión servo HITEC/JR |
| 1 x | 1/12 Pilot "Cougar" |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
| 1 x | Motor ACTRO 35-4-1100 |
| 1 x | Motor ACTRO 28-4-880 |
| 1 x | Connectors MPX female |
| 1 x | Angle support XT60 conector |
| 1 x | Fueraborda RETRO |
| 1 x | Bird (Aero-naut) |
| 1 x | Pushrod octagone 4/3 |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
| 1 x | Control for forward wheel (MINI) |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Horn 6/27 with M3 Bearing |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
| 1 x | Lead with adhesive (2 pcs) |
| 1 x | Pushrod greyline 3/2 with coupler M2 |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Horn DUBRO 1/2A |
| 1 x | Extra long horn 60x30 |
| 1 x | Adapter 3,0 mm M8 |
| 1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
| 1 x | Threaded coupler M2 (10 uds) |
| 1 x | Adapter 4,0 mm M8 |
| 2 x | Propeller POWER-PROP 7x7 |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Compact on-board starting system (9724) |
| 1 x | O-ring Saito FG-73 5cyl |
| 1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | 10 mm Quick clamp_L (6 pcs) |
| 1 x | Triple rod con. 3mm Pushrod (2 pcs) |
| 1 x | 50 mm gas motor standoff |
| 1 x | Aluminium ignition bad (blue) |
| 1 x | 10 mm floating pad (72 pcs) |
| 1 x | Compact on-board starting system (9715) |
| 1 x | Junta humo metalica G35 DLE35 |
| 1 x | Encendido CDI RCAME 1/4*32 Single 120º |
| 2 x | Compact Pitts Muffler OS MAX.35.40 FP |
| 1 x | 1804 2400KV Brushless Motor Qav 250 mini |
| 1 x | Bateria DJI Mini 2 2250 mAh |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 2 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Battery Protection Circuit Board 22.2v 6s |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Bags de Luxe ODYSSEY |
| 1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
| 1 x | Eje barco 450x4 mm M4 |
| 1 x | Remolcador "Jonny Hafenschlepper" |
| 1 x | MythoS 125E YELLOW/BLACK (SebART) |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Captador RCEXL para DA |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | Bags de Luxe ASPIRE |
| 1 x | Baseplate servo |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | MR30 connector female |
| 1 x | Connectors banna oro 3,5 mm (M/F) |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Antenna holder bracket double |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | Blind nut M8 (10 pcs) |
| 2 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Socket Screw M3x9 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | Ball Link Plier |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | Blind nut M6 (4 pcs) |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Cable video GoPro and 5V cable |
| 2 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Extension 7.5 cm |
| 1 x | Bungee HLG Premium |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | Bags MB-339 (Wings & Elevators) |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Black "FUEL VENT" round aluminum overflow socket |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Carbon fiber rod 14 mmx1000 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | MR30 connector male |
| 1 x | |
| 1 x | Bags wings/rudder ASPIRE |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Carbon blade 230 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Bags wings/rudder ODYSSEY |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Brass wire 0.5 mm (25 m) |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Fishing boat Jule Fischkutter |
| 1 x | Sukhoi 29S 140" 3D Monster WHITE/BLUE/RED (SebART) |
| 1 x | EXTRA 300 78" V3 Orange/Blue |
| 1 x | EXTRA 300L 1.2 m Blue |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | MAMBA 10 G2 PNP |
| 1 x | Horn micro type4 Ø 0,5 (2 pcs) |
| 1 x | SU-31 M (Aero-naut) |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | SF260 SIAI MARCHETTI 50E yellow/black (SebArt) |
| 1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | SF260 SIAI MARCHETTI 50E red/white (SebArt) |
| 1 x | Sukhoi 29S 140" 3D Monster YELLOW/BLACK (SebART) |
| 1 x | ANGEL 48" pp orange/black/white |
| 1 x | EXTRA 300L 1.2 m Deep Purple |
| 1 x | Class 30, Red wheel pants (SebART) |
| 1 x | Sukhoi 29S - 2.2 m, Yellow wheel pants (SebART) |
| 1 x | Sukhoi 29S - 2.2 m, Yellow motor cowl (SebART) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
| 1 x | Ignition for ZG motors |
| 1 x | Stainless Steel Bend D 20x0,6mm |
| 1 x | Gasket, insulator ZG 20 |
| 1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
| 1 x | Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B |
| 1 x | Ignition for ZG 20/26 |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
| 1 x | Muffler for Titan ZG 26SC/EI |
| 1 x | Muffler ZG 20 |
| 1 x | Gasket cylinder / insulator for ZG 38/S/SC |
| 1 x | Pan Head Screw M2x6 PH |
| 1 x | Nylon Screw M4x20 |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Pitts S1 - V2 1500 mm (Phoneix Model) |
| 1 x | DC-3 Douglas (White/Blue) 1800 mm |
| 1 x | YAK-23 "FLORA" (RBC Kits) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
| 1 x | Avanti S, Cockpit sunCover (SebART) |
| 1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
| 1 x | 80 mm rods set for direction control |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Motor EME 70 cc with autostarter |
| 1 x | Pitts Mufflers EME 35 cc |
| 1 x | EME ignition free wheel |
| 1 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
| 1 x | Axle for motor A50-L |
| 1 x | Backmountset complete A40 |
| 1 x | EDF Stream-Fan 110mm kv780 |
| 1 x | A50 Motor Mount Alu complete set |
 |
| 13,885.54EUR |
