1 x | Ferrita 17x10x6.5 mm |
1 x | Ferrita 27x14x7 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
2 x | Squared carbon wing joinner 5x5x220 mm |
4 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
3 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
3 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | DUPLEX 2.4EX Expander E4 |
2 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Suport PITOT |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
2 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Sensor DUPLEX 2.4EX MUI 200 |
2 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
2 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | DUPLEX 2.4EX RC Switch |
3 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | Long pinned hinge (6 uds) |
2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | Long pinned hinge (12 uds) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Medium pin type hinge (12 uds) |
1 x | Indoor hinge with servo arm integraded |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Gates hinge |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Glases Ace |
2 x | Glases Aspen |
3 x | Glases Moritz |
1 x | Vasa model Catapult |
1 x | Bungee HLG Premium |
1 x | 1/12 Pilot "Tom" |
1 x | Release wax 250ml |
1 x | Horn DUBRO 1/2A |
1 x | CC 05 |
1 x | CC 01 |
1 x | SE Ring 240 mm (2 pcs) |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
2 x | Ferrita 14x8x5.5 mm |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | DUPLEX 2.4GHz GPS |
1 x | CA Glue (medium) 20g |
3 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
2 x | DUPLEX 2.4EX MFlow2 Gas 800 |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | DUPLEX MRMP Hall EX |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Micro flex hinge (12 uds) |
1 x | DUPLEX MUI 30 Sensor |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
2 x | Glases Stratus |
1 x | Epoxy 40 min (Hardener). 1 Kg |
1 x | Chopped glass fibre strands 0.2 mm |
1 x | 15x7 tree blades propeller LEFT |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Cotton Flocks, bag/ 500 g |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | 14 mm portholes (10 pcs) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
1 x | 25 mm fenders (10 pcs) |
1 x | Pitot tube JETI MSpeed DUPLEX |
2 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Propeller 11x4,7 SlowFlyer |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Rocket cardboard tube 50mm x 48mm x 250mm |
1 x | Receiver CORE PBR-26D 26ch |
1 x | Y Cable |
1 x | PT 21x13 EL Propeller |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | Epoxy Resin L + Hardener LT kit/ 3125g |
1 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | Epoxy Resin L + Hardener LT kit/ 895g |
1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
|
5,073.61EUR |