| 1 x | Cable video GoPro |
| 1 x | TX 250 mW especial GOPRO |
| 2 x | Micro Tarjeta SD Rapid Rush 16 GB |
| 2 x | Cable video GoPro and 5V cable |
| 1 x | Support Pitot JETI |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Partall paste 650 g |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Glases Stratus |
| 2 x | Gates hinge aluminium (1 pcs) |
| 3 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 2 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Oracover Azul Cielo 2 m |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | Buy Perforated film 100 cm / 20 m |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | 19 mm 2:1 black termoretract tube |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 3 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
| 2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | 2,4x1000 mm 2:1 red termoretract tube |
| 2 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | XH male balance (5S) connector (2 pcs) |
| 1 x | 6 mm hexagonal ball link M3 (10 pcs) |
| 2 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Extension PVC 150 cm (Graupner) |
| 1 x | MPX Sub-D Adaptor |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 2 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | Extension silicon 10 cm (Futaba) |
| 1 x | Cabel "Y" 30 cm (Futaba) |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | Connectors banna oro 3,5 mm (M/F) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 2 x | Extractor piñones 2.3/3.2 mm |
| 1 x | Covered closure or fairings |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Small pinned hinge (6 uds) |
| 2 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | 42 mm white plastic spinner for fixed propeller |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | Pin hinge 34x16 mm (10 uds) |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | FX three-position switched channel, long |
| 2 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Interruptor RX/Batterie |
| 2 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 3 x | Large flex hinge (12 uds) |
| 1 x | Female connector for 16 pines AWG |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 2 x | Carbon fiber rod 0.8 mmx1000 mm |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | Round Rod 5,0x1000 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | 50 mm white plastic spinner for fixed propeller |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Pin hinge 39x20 mm (10 uds) |
| 2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Medium pin type hinge (12 uds) |
| 1 x | 50 mm black plastic spinner for fixed propeller |
| 1 x | Small pinned hinge (12 uds) |
| 2 x | Indoor hinge with servo arm integraded |
| 1 x | 36 mm white plastic spinner for fixed propeller |
| 1 x | DPSI Ampere battery backer |
| 1 x | CC 03 |
| 1 x | Flap hinge (6 pcs) |
| 2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 2 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | CC 01 |
| 1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
| 1 x | Robart Door Hinge (Pk2) |
| 2 x | Gates hinge |
| 1 x | Cabling for Fox MDM1 wings |
| 2 x | Long pinned hinge (12 uds) |
| 1 x | Spinner plastic white fixed propeller 30 mm |
| 1 x | BEC 3A FOXY |
| 1 x | Circlick securite |
| 1 x | Spinner plastic black fixed propeller 30 mm |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Spinner fixed propeller 42 mm / 5,0 mm |
| 1 x | CM-3 |
| 3 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 2 x | Spinner plastic white fixed propeller 42 mm |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | 36 mm red plastic spinner for fixed propeller |
| 1 x | DPS Switch JR/JR |
| 2 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | 5 LiPo XH>EH adapter |
| 2 x | Nylon hinge 15x0,3 (10 pcs) |
| 2 x | 30 cm BEC cable (female) |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | CC 02 |
| 1 x | Round flex hinge (12 uds) |
| 2 x | 36 mm black plastic spinner for fixed propeller |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | Spinner plastic red fixed propeller 30 mm |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | 45 mm white plastic spinner for fixed propeller |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Small flex hinge (12 uds) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Connector Sub-D 2+5 Female |
| 2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | 45 mm black plastic spinner for fixed propeller |
| 1 x | JETImodel DPS 40 |
| 1 x | Extension 6 lipos XH > EH |
| 1 x | Electronic switch JETI SP6 0-15v/6A |
| 1 x | Interruptor SPS 70v 60/120A |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | Male connector for 20 pines AWG |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Female connector for 20 pines AWG |
| 1 x | 15 mm reinforced hinge |
| 1 x | EWC6 40 cm wing connector |
| 1 x | Extension 2/3 lipos JST/C |
| 2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | EWC3 40 cm wing connector |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Long Switch On/Off micro |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Male connector for 12 pines AWG |
| 1 x | EWC3 100 cm wing connector |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | 25 mm reinforced hinge |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | Extension 2/3 lipos JST - JST/C |
| 1 x | Electronic switch JETI SP06 Opto |
| 2 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Female connector for 10 pines AWG |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 2 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 2 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 2 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 1 x | Heat sink for Optotronix LEDs |
| 1 x | 10-15mm Servo Arm |
| 1 x | 20-25mm Servo Arm |
| 1 x | Combo lighting module with covering drop shape |
| 1 x | Resistor 3W 5% 2R2 |
| 1 x | Resistor 3W 5% OR82 |
| 1 x | Cockpit aluminium closing 5.4g |
| 1 x | Lead with adhesive (2 pcs) |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Window mounting channel 5m |
| 1 x | 80 mm rods set for direction control |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
| 1 x | Secraft Fuel system v2, red color |
| 1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Rudder 2_Tray 4.5~5 inch |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
| 1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
| 1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
| 1 x | 10m servo "Premium" wire (white/red/blue) |
| 1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
| 1 x | Hot Glue Stick GREEN |
| 1 x | OS GT15 W/E-4040 for airplane |
| 1 x | Motor OS 81 FS 4T |
| 1 x | Motor OS 50 SX-Hyper |
| 1 x | KIRA 600-20 6,7:1 |
| 1 x | KIRA 600-22 6,7:1 |
| 1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
| 1 x | PIX Hawk with accesories |
| 1 x | Motor OS 37 SZ-H |
| 1 x | Motor OS 3805-1200 electric |
| 1 x | PYRO 700-45 |
| 1 x | KIRA 480-38 5,2:1 |
| 1 x | KIRA FAI 5F5/4s |
| 1 x | KIRA 600-20 |
| 1 x | wing/fuselage connector for 16 pines AWG 20-24 |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 1 x | MB339 Freece PNP 1790 mm |
| 1 x | SCHOCKJET ARF 2.050 mm |
| 1 x | Boeing (TX) T-7A RED HAWK |
| 1 x | 1,6x1000 mm 2:1 red termoretract tube |
| 1 x | PC-21 2880 mm Electric Landing Gear |
| 1 x | PC-21 2.880 mm SINGAPUR scheme |
| 1 x | 37 mm PVC transparent battery termo-retract (1 m) |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | SBEC 40 |
| 1 x | PSC 5 |
| 1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
| 1 x | Extension lead 15 cm Multiplex |
| 1 x | Xoar Electric Beechwood Prop 20x10 |
| 1 x | Turbo light spinner cap white 32mm |
| 1 x | Potenciometro micro |
| 1 x | CHALLENGER Indoor |
| 1 x | Axle for motor A30-XL V2 |
| 1 x | PROFI TX fastening rings |
| 1 x | GPS V2 Sensor for M-LINK receivers |
 |
| 16,433.19EUR |
