| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Round Rod 2,0x1000 mm |
| 2 x | Round Rod 4,0x1000 mm |
| 1 x | ABS I Strip 20x10x1000 mm |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | ABS I Strip 10x5x1000 mm |
| 2 x | Round Rod 1,25x1000 mm |
| 2 x | Round Rod 1,5x1000 mm |
| 2 x | Round Rod 1,0x1000 mm |
| 2 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 2 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 2 x | 30 cm BEC cable (female) |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | JETImodel SINGLE BEC |
| 1 x | CC 05 |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 2 x | Cabel charger transmitter GRAUPNER |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | CC 03 |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Circlick securite |
| 1 x | Covered closure or fairings |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 2 x | TrainerCord (master-learner) |
| 2 x | 30 cm BEC cable (male) |
| 2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | CC 02 |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Adapter lead MPX/EC3 |
| 2 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
| 1 x | Extension silicon 100 cm (Graupner) |
| 1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
| 1 x | Extension lead 15 cm Multiplex |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Extension silicon 30 cm male (Graupner) |
| 2 x | Futaba Female 40 cm extension |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 2 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
| 1 x | Circlick securite |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | Extension silicon 35 cm male (Futaba) |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 2 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Extension silicon 30 cm female (Graupner) |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | Futaba male 40 cm extension |
| 1 x | Xplorer3 anemometro |
| 1 x | Xplorer2 anemometro |
| 1 x | Xplorer4 anemometro |
| 1 x | Optotronix Aurora Plug |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | 1,6x1000 mm 2:1 black termoretract tube |
| 1 x | 2,4x1000 mm 2:1 black termoretract tube |
| 1 x | Ballast 700gr OPALE |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Motor OS 3820-1200 electric |
| 1 x | SWTU2 switch |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Switc electronic 30 Amp |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | One touch canopy lock |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Canopy Latch |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 2 x | SBEC Jeti |
| 1 x | PSC 5 |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | Control for forward wheel (MINI) |
| 1 x | Magnetic Interruptor MULTIPLEX |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Pushrod octagone 3/2 with coupler M2 |
| 1 x | Pushrod greyline 3/2 with coupler M2 |
| 1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
| 1 x | Snap long M2 (10 uds) |
| 1 x | Propeller POWER-PROP 7x7 |
| 1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
| 1 x | Electronic fog horn |
| 2 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
| 1 x | Pushrod octagone 4/3 |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Connector CAN 15 |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
| 1 x | Fiberglass tube 6/4x1000mm |
| 1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
| 1 x | Extension 15 cm (Futaba) |
| 2 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Cable S.BUS 3 salidas 300 mm |
| 1 x | Extension PVC 150 cm (Graupner) |
| 1 x | Extension 30 cm (Futaba) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
| 2 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
| 1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
| 2 x | Cabel "Y" 30 cm (Futaba) |
| 1 x | Premium servo extension 50cm |
| 1 x | Round Rod 5,0x1000 mm |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Extractor piñones 2.3/3.2 mm |
| 1 x | Motor XPower F2915/12 XLight |
| 1 x | Sukhoi 29S 2,6 m Yellow/Black (SebART) |
| 1 x | EDGE 540-A 91" (2310 mm) |
| 1 x | 152x46 Ø6.0 mm aluminium core wheel |
| 1 x | 1/6 Pilot "Garry" |
| 1 x | 160 mm carbon undercarriage (2pcs) |
| 1 x | 1/4 Pilot "Mike" |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | XPower XC4226/12 LS |
| 1 x | XPower XC5030/14 LS |
| 1 x | Motor XPOWER F2919/10 F5J Light |
| 1 x | MIG AC 400 /14 |
| 1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
| 1 x | 20x200 mm battery rings |
| 1 x | 25 mm carbon servo arm |
| 1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
| 1 x | BULL MØ1 2.600mm "ALPINE" |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | ALBATROS L-39 G2 "Camo Tiger" Turbine ready |
| 1 x | 5 LiPo XH>EH adapter |
 |
| 11,876.60EUR |
