| 4 x | Chili F3K 2 wing servo mounted |
| 2 x | X-RAY Micro QR (Tail Tube) |
| 3 x | Chili Race F3K (aramid nose) |
| 1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
| 1 x | LASER 73" 1.85m (05) PILOT |
| 1 x | Propeller APC 14x8.5 Electric Pusher |
| 2 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | Propeller POWER-PROP 14x9 Izda |
| 2 x | Vest clothes Hispano Aviación |
| 2 x | Cap Hispano Aviación |
| 1 x | Shirt Hispano Aviación |
| 1 x | Softshell Hispano Aviación |
| 1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
| 1 x | ARTIST 1.560 mm |
| 1 x | BULLIT Wing 840 mm |
| 1 x | Albatros ,spare cockpit (Top Model) |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Extra-long adjustable aluminium control horn 2,8x34 |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | Cable with accesories |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | 3l Smoke oil |
| 1 x | Rubber profile 6-2 mm 2M |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Horn mando small (2 pcs) |
| 1 x | 5 mm M2 variable inclined horn |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 2 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | Glases Innovation Plus |
| 1 x | Glases Flitemaster |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 2 x | Profile ABS half cane 8.0x1000 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 2 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 2 x | Profile ABS half cane 5.0x1000 mm |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | Field folding model stand SebArt |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Tape GFK 25 mm |
| 1 x | Profile ABS half cane 6.0x1000 mm |
| 1 x | Blue smoke canister 100 g |
| 2 x | Horn 20x28,5 mm (2 pcs) |
| 2 x | SE Ring 330 mm (4 pcs) |
| 1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
| 1 x | Towing hook |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 2 x | 6 mm red aluminium threaded horn with patella |
| 1 x | 6 mm M3 variable inclined horn |
| 2 x | Horn 5/15 with M2 Bearing |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | B4-0 rocket charges (6 pcs) |
| 2 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Towing hook |
| 1 x | 6 mm M3 variable horn |
| 1 x | SE Ring 450 mm (2 pcs) |
| 2 x | Glases Stratus |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Profile ABS half cane 3x1000 mm |
| 2 x | LOWER TOW HOOK |
| 1 x | Horn DU-BRO 1/2 (2 pcs) |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | 6 mm ball link M3 (10 pcs) |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Clip fixing for wing (2 pcs) |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Round Rod 1,5x1000 mm |
| 1 x | Carbon fiber rod 14 mmx1000 mm |
| 2 x | Gates hinge |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Pin hinge 39x20 mm (10 uds) |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
| 1 x | 1,2x1000 mm 2:1 black termoretract tube |
| 1 x | 140 mm rods set for direction control |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Circlick securite |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 2 x | M2,5 Diam metal ball link V3 (2 pcs) |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Blue metalic ball link M2/2 azul (2 pcs) |
| 1 x | Long ball link M3 (6 uds) |
| 1 x | ORACOVER Ferrari red (2 m) |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | Monokote ROJO misil (1.8x0.65m) |
| 2 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 2 x | X-RAY Micro QR |
| 1 x | X-RAY Micro QR (Elevator) |
| 1 x | GameCommander USB Universal |
| 1 x | SERVO HOLDER |
| 1 x | Racor 2/3 mm |
| 1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
| 1 x | Turbo light spinner cap white 32mm |
| 1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
| 1 x | Propeller Pleg CAM-Prop 8x6 |
| 1 x | Coupling bush 5 - 5 mm |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Astra (Top Model) |
| 1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
| 2 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
| 1 x | TX 250 mW especial GOPRO |
| 1 x | MZ-18, 9 Channel HoTT |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Conector JAPAN G2 Set 5 pares |
| 1 x | Hose clips 6 mm |
| 1 x | Distanzstück motor OS 120 AX |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | Transmitter Crystal 35 Mc/s Ch 62 |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Propeller hub spacer 8/5.5 |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | Receiver replacement antenna, approx. 15 |
| 1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | Glases Moritz |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | 20 mm carbon horn |
| 1 x | Small pinned hinge (6 uds) |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | SPS 70V 100/200 A |
| 1 x | PPM Encoder Module |
| 1 x | Socket head long ball link M3 (6 uds) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Jeti Box mini |
| 1 x | SPS Remote switch actuator |
| 1 x | LED blink wire flashing (blue - 2pcs) |
| 1 x | MZ-12, 6 Channel HoTT |
| 1 x | ABS rectangular profile 12x6.0x1000 mm |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Adjustable brass horn threaded M3 |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 1 x | Cable control set |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Propeller balancer |
| 1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | Propeller balancer |
| 1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
| 1 x | Small aluminium horn red (2pcs) |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
| 1 x | Horn 6/27 with M3 Bearing |
| 1 x | Cinta Goldfix 1m |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | Tape GFK 38 mm |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Interruptor RX/Batterie |
| 1 x | F-16 Scale 1/6 G3 Airex Deco: AF 916F |
| 1 x | Magnetic Interruptor MULTIPLEX |
| 1 x | M3 INDUSTRIAL ball link (2 uds) |
| 1 x | Switc electronic 30 Amp |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | SWTU2 switch |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Pins M connect Multipin connectors AWG 20-24 |
| 2 x | Small pinned hinge (12 uds) |
| 2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Socket head long ball link M3 (2 uds) |
| 1 x | PSC 6 |
| 1 x | HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106 |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | PSC 5 |
| 1 x | SBEC 40 |
| 1 x | SBEC Jeti |
| 1 x | MAX BEC 2 |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Ball link M1.6 (6 uds) |
| 1 x | Multi-adapter balancer JST/C - TP |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Extension 5 lipos JST/C - JST |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 2 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Multi-adapter balancer JST - TP |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Propeller APC 12x6 Electric Pusher |
| 1 x | Propeller APC 13x8 Electric |
| 1 x | Propeller APC 13x4 Electric |
| 1 x | Propeller electric carbon 10x6 |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | Servo slow down unit (0,7-14,7 sec ) |
| 1 x | Small flex hinge (12 uds) |
| 1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
| 1 x | Propeller APC 10x5 Electric |
| 1 x | Propeller APC 10x3,8 SF |
| 1 x | Propeller APC 10x6 Electric Pusher |
| 1 x | Propeller APC 13x10 Electric |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Propeller electric carbon 8.5x6 |
| 1 x | Albatros red/white (Top Model) |
| 1 x | 1 m servo "Premium" wire (white/red/blue) |
| 1 x | Extension for SensorSwitch 30cm |
| 1 x | 10m servo "Premium" wire (white/red/blue) |
| 1 x | 30 cm DEANS female connector |
| 1 x | Servo Metal Horn 15.5 mm MKS |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
| 1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
| 1 x | Servo MKS 6100 DS |
| 1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
| 1 x | Servo MKS HBL380 |
| 1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | Servo SAVOX SA-128S SG |
| 1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
| 1 x | Servo SAVOX SH 0257 MG |
| 1 x | Servoarm Aluminium SH-82 |
| 1 x | Servo SAVOX SV-0236 MG HV |
| 1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
| 1 x | PS-050 TONEGAWA Servo |
| 1 x | Motor B20-18 L + 4:1 gearbox |
| 1 x | Backmountset complete A40 |
| 1 x | AXI 2814/12 V2 Long |
| 1 x | KIRA 600-20 6,7:1 |
| 1 x | Bearing 698-2Z for AXI 5330/xx |
| 1 x | KIRA 400-34 |
| 1 x | KIRA 600-24 6,7:1 |
| 1 x | AXI 2814/10 V2 Long |
| 1 x | KIRA 480-38 5,2:1 |
| 1 x | 1804 2400KV Brushless Motor Qav 250 mini |
| 1 x | AXI 2814/16 V2 |
| 1 x | AXI 2814/12 V2 |
| 1 x | Axle for AXI 4130 V2 motors |
| 1 x | Motor XPOWER F2919/10 F5J Light |
| 1 x | AXI 2820/10 V2 Long |
| 1 x | AXI 2808/24 V2 |
| 1 x | Motor XPower F2915/12 XLight |
 |
| 16,887.92EUR |
